The metastable isotope of technetium-99 (Tc-99m) is an important diagnostic tool used in the field of nuclear medicine due to the isotope's 6.0 hour half-life, 140.5 keV γ-decay mechanism, and multiple oxidation states [1,2]. Approximately 70% of the world’s nuclear medicine procedures involve the use of Tc-99m [3]. The conventional...
In recent years, the global nuclear industry has placed a greater emphasis on passively safe reactor designs. In particular, much attention and design work has been applied to engineered systems for passive cooling of nuclear fuel, whether it be loaded in a core or stored in spent fuel pools. The...
In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
The metal-organic–framework MOF-5 is used as an adsorbent in advanced systems for vehicular hydrogen storage that are currently under development. Presently, these systems are limited by poor thermal conductivity of the adsorption bed, and thus our research addresses how the interfaces between grains of MOF-5 can be engineered to improve...
Boiling heat transfer is studied for its ability to dissipate high fluxes and achieve heat transfer coefficients two orders of magnitude greater than single-phase heat transfer systems. Heater surface enhancement with increased surface area, varied geometry, wettability contrast and micro/nano-structures can further enhance boiling heat transfer performance through bubble nucleation...
The Direct Reactor Auxiliary Cooling System (DRACS) is a passive safety system capable of removing decay heat directly from the reactor core. Its modularity makes it scalable for use in reactors with various power levels. Work has previously been completed to support inclusion of the DRACS in liquid metal reactors...
The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
The Boltzmann transport equation derived in the Self-Adjoint Angular Flux (SAAF) formulation is applied to simulate phonon transport. The neutron transport code Rattlesnake is leveraged in this fashion, slightly modi ed to accept input from variables consistent with phonon transport simulations. Several benchmark problems are modeled to assess the potential...
The United States (US) Department of Energy (DOE) has identified the pebble-bed reactor as a high priority for US research with the end goal of licensing a pebble-bed reactor (PBR) for operation in the United States. Before this can be accomplished significant research must be done regarding the safety of...
The ever increasing requirements for heat dissipation in various thermal management applications such as computer chip cooling and high power electronics have necessitated the need for novel thermal management techniques. Thermal management using heat sinks with microscale features is amongst the prominent techniques developed over the past two decades. In...
The OSU MASLWR Test facility is a scaled integral systems LOCA and proof-of-concept test facility for the Multi-Application Small Light Water Reactor design concept. A unique feature of this design is to utilize a small high pressure containment vessel to provide the safety containment function for an integral reactor pressure...
This thesis discusses the design of several microchannel solar receiver devices for use in CSP (concentrated solar power) using CFD (computational fluid dynamics) simulations. The goal is to demonstrate that, by taking advantage of the higher heat transfer coefficienct of microchannels, solar receivers can achieve higher efficiency than current receiver...
The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
The research presented in this thesis is a continuation of collaboration between Oregon State University and Auburn University studying the feasibility of passively pumping liquid during boiling in a preferential direction using meso-scaled asymmetric surface patterns. Such a passive phase-change mechanism has great potential for thermal management in spacecraft and...
Metal oxide nanocrystals have attracted significant interests due to their unique chemical, physical, and electrical properties which depend on their size and structure. In this study, a continuous flow microreactor system was employed to synthesize metal oxide nanocrystals in aqueous solution. Assembly of nanocrystals is considered one of the most...
At Oregon State University the Multi-Application Small Light Water Reactor (MASLWR) integral effects testing facility is being prepared for safety analysis matrix testing in support of the NuScale Power Inc. (NSP) design certification progress. The facility will be used to simulate design basis accident performance of the reactor's safety systems....
With continued development of the electronic industry, the demand for highly efficient heat removal solutions requires innovative cooling technologies. A computational fluid dynamic (CFD) study, including heat transfer, is performed for an axisymmetric, confined jet impingement experiencing boiling and coupled with vapor extraction. Boiling occurs at the target surface while...
Characterization of local boiling trends, in addition to the typically reported area-averaged trends, is essential for the robust design and implementation of phase change technologies to sensitive heat transfer applications such as electronics cooling. Obtaining the values of heat fluxes corresponding to locally varying surface temperatures has been a challenge...
Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...
This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...