Search Constraints

Start Over
Filtering by: Subject Finite element method Remove constraint Subject: Finite element method Decade 2010-2019 Remove constraint Decade: 2010-2019

Search Results

  • Numerical Modeling of Mass Timber Connections

    Creator:
    Hollenbeck, Sean R.
    Abstract:
    Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
    Resource Type:
    Masters Thesis
    Full Text:
    commercially available finite element method (FEM) software, ABAQUS (2014) was used to perform the numerical

  • Numerical Simulations and Microscale Analyses of Offshore Anchor-Granular Material Systems

    Creator:
    Zhang, Nan
    Abstract:
    Anchoring systems are used to hold floating offshore devices (e.g., energy devices, oil platforms) to keep them on their stations. Anchors are embedded into the seabed soils. In some cases, the interface shear between anchor and seabed soils together with anchor self-weight provide the holding capacity of the anchoring systems....
    Resource Type:
    Dissertation
    Full Text:
    and Pu, 2004; Wang et al., 2007a). For numerical analysis, the finite element method (FEM) or

  • Crack Penetration and Deflection Behavior at Interfaces

    Creator:
    Alam, Mahabub
    Abstract:
    This study computationally and experimentally examines the mechanisms of crack penetration, deflection and the transition between penetration and deflection. The finite element analysis based computational modeling work used strength-and-energy based cohesive-zone approach to study the effect of dimensionless parameters (e.g., interfacial incident angle, fracture-length scale, and normalized toughness) on penetration/deflection...
    Resource Type:
    Dissertation
    Full Text:
    ...................................................................................................... 8 2.2.2 Finite element model

  • Finite Element Analysis Modeling and Experimental Verification of Reflected Wave Phenomena in Variable Speed Machine Drive Cables

    Creator:
    Louie, Alex
    Abstract:
    Modern variable speed machine drive (VSMD) systems are used for a variety of purposes including generation, propulsion, pumps and compressors. They employ high switching frequency power electronics to drive the electric machine. The machine is subject to large voltage overshoot if long power cables, are used, called Reflected Wave Phenomena...
    Resource Type:
    Masters Thesis
    Full Text:
    Element Analysis Finite Element Analysis (FEA) is a numerical method to model and solve complex

  • Compatible Discretizations for Maxwell's Equations with General Constitutive Laws

    Creator:
    McGregor, D. A.
    Abstract:
    In this thesis we construct compatible discretizations of Maxwell's equations. We use the term compatible to describe numerical methods for Maxwell's equations which obey many properties of vector Calculus in a discrete setting. Compatible discretizations preserve the exterior Calculus ensuring that the divergence of the curl and the curl of...
    Resource Type:
    Dissertation
    Full Text:
    finite element method. There are many ingredients in a MFD method. First one must have a mesh of a

  • High Order Finite Elements SN Transport in X-Y Geometry on Meshes with Curved Surfaces in the Thick Diffusion Limit

    Creator:
    Woods, Douglas N.
    Abstract:
    The high-order finite element S[subscript N] transport equations are solved on several test problems to investigate the behavior of the discretization method on meshes with curved edges in X-Y geometry. Simpler problems ensured the correct implementation of MFEM, the general fi nite element library employed. A convergence study using the...
    Resource Type:
    Masters Thesis
    Full Text:
    organized as follows: Section 1.1 reviews the finite element spatial discretization method applied to the

  • Fluid-structure interaction analysis with the particle finite element method

    Creator:
    Zhu, Minjie
    Abstract:
    To facilitate the evaluation and design of structures subjected to fluid loading, a study of fluid-structure interaction (FSI) using the particle finite element method (PFEM) is presented to approximate the responses and sensitivities of structures which interact with fluid. A wide range of structural types are permissible by making no...
    Resource Type:
    Dissertation
    Full Text:
    finite element method AN ABSTRACT OF THE THESIS OF Minjie Zhu for the degree of Doctor of

  • Finite element modeling of gusset plate failure using OpenSees

    Creator:
    Walker, Andrew J.
    Abstract:
    The collapse of the I-35W Bridge in Minneapolis, MN in 2007 prompted an investigation into the design and inspection of the steel truss bridges. Further investigation into the collapse revealed that a gusset plate experienced sway buckling, causing the bridge failure. This bridge failure motivated research into the analysis and...
    Resource Type:
    Masters Thesis
    Full Text:
    on an approximation method, which includes finite-element analysis, modeling, detail, and other

  • A numerical wave tank based on coupled potential flow-viscous flow model

    Creator:
    Zhang, Yi
    Abstract:
    In this study, a coupled potential flow-viscous flow model is used for numerical wave tank simulation. The solver satisfies all the requirements for such a simulation environment. The coupling scheme is based on a non-overlapping heterogeneous domain decomposition method. In this method, the flow domain consists of two subdomains. In...
    Resource Type:
    Dissertation
    Full Text:
    solve Laplace’s equation, while in the viscous flow subdomain, a finite element method (FEM) is used to

  • Finite volume method modeling of corona discharge microreactor oxidization of dibenzothiophene

    Creator:
    Fan, Xiangru
    Abstract:
    The growing need for cleaner fuels requires the development of better deep fuel desulfurization methods. The current study presents a reaction model for the mechanism of dibenzothiophene oxidization by dissolved oxygen occurring in a corona discharge microreactor. In the present work, a Finite Volume Method model of the reactor is...
    Resource Type:
    Masters Thesis
    Full Text:
    PDEs (partial differential equations). It is similar to the finite element method (FEM) and the