The majority of low-rise residential structures in the U.S. are constructed with wood. Wood-based composites are primary building materials in these structures, used as structural sheathing, joists, and beam components. Wood composites are susceptible to degradation upon exposure to high levels of moisture. Moisture durability is routinely assessed with accelerated...
Western juniper (Juniperus occidentalis) is a conifer that is native to Oregon, California, Washington, Nevada, and Idaho. Juniper is known to have highly decay resistant heartwood and is a popular choice for finished furniture. With recent forest management practices over the past 100 years have resulted in an immense population...
:
_____________________________________________________________________
ArijitSinha
Western juniper (Juniperus occidentalis) is a conifer that is native to
Western juniper (Juniperus occidentalis) is a “native invasive” tree species in Eastern Oregon. It is extremely good at finding and consuming water in arid climates, which makes it difficult for other plant species, especially sagebrush and grasses to survive. Sagebrush and grasses are necessary for the survival of the sage...
To quantify the postpeak residual capacity and
to gain insights into the load transfer mechanism of a shear
wall, nail connection tests were performed on salvaged
connections after a monotonic shear wall test loaded up
to peak load. Experimental results reveal that there is a
loss of strength in most...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
The advent of synthetic adhesives has transformed the structural applications of wood. However, a persistent issue in adhesively-bonded wood products has been moisture durability. When designing wood based composites, moisture durability will depend on both the wood phase and the adhesive phase. A key question, therefore, is how does one...
Cross-Laminated Timber (CLT) is a prefabricated building material that is relatively new to the United States and North America. It consists of no less than three layers of graded, dimensional lumber glued in alternating longitudinal and transverse layers to create a panel that can be used for various building applications...
Concrete formwork is a common type of temporary structure used on construction projects. Due to difficulties in considering actual construction site implications during formwork design, assessments of formwork integrity are often made in the field by site personnel based on subjective visual inspection. The use and re-use of concrete formwork...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...