The goal of this project was to develop an integrated pest management strategy
for the control of a powder-post beetle (Dinoderus minutus F.). This species causes
serious damage in Philippine bamboo. Developmental threshold and thermal constants
were examined and natural enemies and ftmgi associated with beetles were investigated.
Finally, the...
In deciduous species, water exits stems mainly through leaf traces
attached to the outer growth ring and yet we know that water ascends
throughout the entire cross-section of the sapwood. There is an increasing
amount of information on sap flow and sapwood hydraulic properties from
separate studies, but little information...
The overall goal of this study is to evaluate the earthquake performance of wood frame
shear walls, and more specifically: (1) to compare the performance differences of fully and
partially anchored walls under monotonic, cyclic, and earthquake loads, (2) to compare wall
performance under earthquake loads with that of standardized...
Many paper products like towel and tissue cannot serve their purposes without temporary wet strength Glyoxal-polyacrylamide (GPA) resin is one of the widely used commercial wet strength additives that impart the temporary wet strength to paper and paperboard products However, GPA resin is derived from petrochemicals and contributes to contaminants...
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...
Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
Key parts of the lateral force resisting system in wood-frame buildings
are the shearwafls and the connections. The connections in wooden buildings
are the primary source of ductility and energy dissipation; these are essential
properties when buildings are exposed to lateral forces, such as wind and
earthquakes. Shearwall design is...
In wood-plastic composites (WPCs) a compatibilizer is often used to improve
the interfacial adhesion between the hydrophilic wood filler and the hydrophobic
plastic matrix. At present, while the basic concepts of compatibilization are
understood, the optimized chemical structures of an effective compatibilizer, including
the ideal structures of the wood-binding domain...
Wood-plastic composites (WPCs) are one of the fastest-growing sectors of the
wood composites industry. However, the strengths of WPCs are typically low
because of the poor interfacial adhesion between hydrophilic wood and
hydrophobic thermoplastics. A compatibilizer that can form bridges between wood
and plastics is required to give WPCs desirable...