This thesis presents a low power DC-DC converter suitable for harvesting energy from high impedance thermoelectric generators (TEGs) for the use in body powered electronics. The chip has been fabricated in a 130nm CMOS technology. To meet the power demands of body powered networks, a novel dual-path architecture capable of...
Phase Locked Loops(PLLs) are an integral part of almost every electronic system. Systems involving low frequency clocks often require PLLs with low bandwidth. The area occupied by the large loop filter capacitor and resistor in a low bandwidth PLL design makes the realization of traditional charge-pump PLL architecture impractical on...
Wireless sensor networks are becoming important in several monitoring and sensing applications. Ultra low power consumption in the sensor nodes is important for extending the battery life of the nodes. In this dissertation, two low power BFSK receiver architectures are proposed and verified with prototype implementations in silicion.
A 2.4...
The proliferation of body worn autometric devices has been enabled by advances in low-power electronics and fueled by the quantified-self movement. These devices range in complexity from pedometers to clinical vital sign measurement. They all share the same drawback, typically the most expensive and heaviest component, the battery. The future...
The work detailed here is the development of simulations and fabrication techniques used for the construction of thin-film acoustic transducers for use in the parametric pumping of spin waves. The Mason Model, a 1-D equivalent circuit simulating the responses of multilayer acoustic transducers, is implemented using ABCD-parameters in MATLAB to...
Voltage controlled oscillator (VCO) based ADC is an important class of time-domain ADC that has gained widespread acceptance due to their several desirable properties. VCO-based ADCs behave like an open-loop continuous time ΔΣ modulator and achieve excellent resolution by first order noise shaping the quantization error. However, the SNDR of...
Frequency synthesizers are critical components of all communication systems. This thesis considers the issue of undesirable frequency spurs of a relatively recent type of frequency synthesis architecture called digital-to-time conversion (DTC). The DTC-based frequency synthesis architecture has important performance benefits over older frequency synthesizers, such as fast frequency switching, large...
As the growth of renewable energy sources, such as wind, solar, and ocean wave, increases, their impact on the electrical grid has been rapidly escalating. Although renewable resources have been able to offset some traditional generation, they have also brought a need for increasing reserve capacity due to their non-dispatchable,...
Ocean testing of Wave Energy Converter (WEC) prototypes is necessary to facilitate commercial WEC development. The Ocean Sentinel Instrumentation Buoy, completed in August 2012, provides a stand-alone load for WEC prototypes during ocean testing. The first part of this work was to develop the power conversion and data acquisition equipment...
As advanced wired and wireless communication systems attempt to achieve higher performance, the demand for high resolution and wide signal bandwidth in their associated ADCs is strongly increased. Recently, time-domain quantization has drawn attention from its scalability in deep submicron CMOS processes. Furthermore, there are several interesting aspects of time-domain...
Traditionally, networking protocol designs have placed much emphasis on point-to-point reliability and efficiency. With the recent rise of mobile and multimedia applications, other considerations such as power consumption and/or Quality of Service (QoS) are becoming increasingly important factors in designing network protocols. As such, we present a new flexible framework...
High Definition video streaming over WLANs faces many challenges because video data requires not only data integrity but also frames have strict playout deadline. Traditional streaming methods that rely solely on either UDP or TCP have difficulties meeting both requirements because UDP incurs packet loss while TCP incurs delay. This...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
Inter-symbol interference is one of the major factors that make the realization of high-data-rate digital communications system complex. Current designs face two main challenges: how to efficiently utilize the available bandwidth and how to reduce the hardware complexity of the transmitter and receiver. Traditional solutions use a single-band architecture. When...
In this dissertation, time-based signal processing techniques and their applications in oversampling and noise-shaping data converters are examined. These techniques demonstrate the ability to shift the burden of high performance analog circuits from the compressed voltage-domain to the augmented time-domain. First, the potential of high order noise-shaping and phase-domain feedback...
Modern day CMOS processes are characterized by voltage scaling and geometry scaling. Geometry scaling helps reduce gate delays, thereby aiding in the design of data converters which use time based processing. Another artifact of geometry scaling is the increase in complexity of digital circuitry available on traditional analog ICs, as...
With each generation of technology, computers become even more capable of rendering objects with an ever increasing number of polygons. As a result, the desire to add more details to a 3D model increases as well. Among the many tools provided by computer graphics software that an artist has at...
Over the last 20 years, there has been rapid growth in the amount of installed wind power in the Pacific Northwest, specifically in the Columbia River Gorge. The variable and non-dispatchable nature of this resource requires that it be balanced in some form by other sources on the grid. In...
Markov Decision Process (MDP) is a well-known framework for devising the optimal decision making strategies under uncertainty. Typically, the decision maker assumes a stationary environment which is characterized by a time-invariant transition probability matrix. However, in many real-world scenarios, this assumption is not justified, thus the optimal strategy might not...
Network coding, as the next generation of data routing protocols, enables each intermediate node in a network to process and encode its received data before forwarding it to the next nodes. Hence, the core idea in network coding is to allow a network to encode the data that is being...