A long path dc plasma arc operated in an atmosphere of
argon is described. The arc is easily ignited and operated, and
is inexpensive to use. Samples were introduced into the arc as
solution aerosols. Radially resolved emission measurements are
reported for calcium, copper, and hafnium. The detection limit
for...
A double-beam photometer was designed and built employing photon counting to give a direct digital readout. It was evaluated as an analytical instrument with special emphasis on pulse recovery time, pulse interaction and instrument settings. An equation is developed to explain pulse interaction in event counting systems.
An atmospheric pressure argon glow discharge is shown
to detect trace levels of carbohydrates in aqueous flowing
systems, using either of two glow discharge solution
interface configurations. The first configuration consists
of an oscillating glow discharge sustained between a flowing
aqueous cathode and platinum anode. Picomole and micromolar
mass and...
A new three-phase argon plasma arc was developed for analytical emission spectroscopy. The power supplied to the plasma arc utilized a simple circuit with three-phase as line voltage stepped down via a transformer to 104Vrms. A three concentric quartz tubing assembly was determined to be the optimum configuration for supplying...
The temporal and spatial characteristics of a laser microprobe plume were investigated using the spectroscopic methods of emission, absorption and fluorescence. The plume was produced by rapid vaporization of a small quantity (1 μg) of a solid sample using a focussed pulsed dye laser (110 MW/cm²). For absorption and fluorescence...
A nonflame method for atomic absorption spectroscopy is
described. A helical tungsten filament from a commercially available
6-V, 4-A light bulb, heated to :incandescence in an argon atmosphere
is used to atomize 2-μl aqueous samples for metals analyses. Studies
of two hollow cathode lamp tungsten filament orientations, a
modulated light...
The use of gas jets in a sputtering cell makes this direct sampling method practical for atomic absorption and mass spectrometry determinations. With a commercial six-jet sputtering source, the Atomsource (Analyte Corp., Grants Pass, Oregon), that directly atomizes solid samples for conventional atomic absorption spectrophotometers, the sample loss rate for...