A sensitive, selective, rapid analytical method based on large-volume injection (LVI)
liquid chromatography/ tandem mass spectrometry was developed using
commercially-available hardware that eliminates the need for either off-line or on-line
solid phase extraction. Centrifugation followed by the direct injection of 1,800 µL
was used for the quantification of illicit drugs,...
The development of analytical methods for emerging contaminants creates many unique challenges for analytical chemists. By their nature, emerging contaminants have inherent data gaps related to their environmental occurrence, fate, and impact. This dissertation is a compilation of three studies related to method development for the structural identification of emerging...
Research and public concern of poly and perfluoroalkyl substances (PFASs) as environmental contaminants has increased significantly due to the increasing number of reports of their detection in humans and wildlife. PFASs have a number of commercial applications including surfactants, coatings, polymers, and levelers, which are used on consumer products like...
Capstone 1157 is a commercial reference material used in aqueous film forming foam (AFFF) applications and was manufactured by DuPont. The material’s purpose in this project was to be the sole carbon source to microbes in a biodegradation study in a microcosm environment. The goal of this project was to...
Linear alkylbenzenesulfonate (LAS) is the most widely used anionic surfactant in
commercial detergent formulations. The environmental fate of LAS is of interest because
of its disposal to wastewater treatment facilities and subsequent occurrence as a
micropollutant in surface waters and groundwater. While LAS fate in wastewater
treatment systems and surface...
Public attention and concern about per- and polyfluoroalkyl substances (PFASs) are increasing due to detection of PFASs in drinking water supplies, the environment, including remote locations, and wildlife and to the lowering of the federal health advisory levels of perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) in drinking water. Aqueous film-forming...
Aqueous film forming foams (AFFFs) are proprietary mixtures containing hydrocarbon surfactants and per-and polyfluoroalkyl substances (PFASs) that are used to extinguish hydrocarbon-based fuel fires. There is limited information on hydrocarbon surfactants in AFFFs and AFFF-contaminated groundwater even though they are more abundant (5-10% w/w) than PFASs (0.9-1.5% w /w) in...
It is the responsibility of humans, as environmental stewards, to monitor our impact on the environment so that efforts can be made to remediate the effects of our actions and change behaviors. To better understand our environmental footprint, sensitive and simple analytical methods are needed to quantify the contaminants that...
Trichloroethene (TCE) is the most frequently detected organic contaminant in groundwater, is classified as a probable human carcinogen, and exhibits toxicological effects on the human endocrine, immune, developmental, and reproductive systems. While significant research efforts have been devoted to the development of strategies for remediating TCE-contaminated groundwater, their advancement is...
Chlorinated aliphatic hydrocarbons (CAHs) such as vinyl chloride (VC) and 1,-2 dichioroethane (DCA), are wide-spread groundwater pollutants found at many contaminated field sites around the world. Quantitative tools are needed to determine the in situ rates of VC and DCA transformation to ethene in contaminated groundwater. The objective of this...