Significant progress has been made over the past 20 years in developing models to estimate the service-life of reinforced concrete systems. The basic understandings of the mechanisms that control the transport of ions and moisture in concrete systems have been well researched and models for determining corrosion initiation, specifically chloride-induced...
A significant number of Unreinforced Masonry (URM) buildings exist in the Pacific Northwest region of the United States of America that is a region of high seismicity, which could be subjected to both crustal and subduction zone earthquakes. The catastrophic and brittle failures associated with URM buildings in the past...
Transportation systems are facing safety and operational challenges with a cost of billions of dollars annually in lost production time and wasted fuel. Infrastructure expansion, previously held as a panacea to most transportation challenges has lost its appeal due to financial, land-use and environmental constraints. Interest is surging in intelligent...
The role of ground motion duration on the seismic performance of civil engineering structures remains unclear. Thus, the role of earthquake strong ground motion duration is assessed in a three manuscript thesis, which includes: (1) assessment of the effects of ground motion duration on the seismic performance of a model...
Traditional faculty development programs aimed at disseminating research-based pedagogy and innovations at potential adopters have helped increase awareness of these innovations; however, their adoption into engineering classrooms has been limited. This paper aims to present an alternative, pull-oriented approach to faculty development where faculty participants co-develop curricular innovations with engineering...
In the light of the changing climate, the importance of designing effective watershed management plans that are likely to be implemented is becoming ever more important. This research introduces a new concept, consensus, for incorporation into stakeholder-guided interactive optimization of watershed management plans. User preferences were mathematically simulated based upon...
Every year thousands of people are killed or injured in work zone crashes in the US due to excessive speed, distraction, inattentiveness, low visibility, and other factors. Roadway construction and maintenance operations often occur at night when the traffic volume is low, creating less congestion and delay to the traffic....
In this study, the effects of implementing different wind input or physics packages in a numerical wave model to recreate large wave conditions are explored. Three large wave events are simulated with WaveWatch III. The wind inputs which are compared are NCEP's Global Forecasting System (GFS) with 0.5 degree resolution...
Student engagement is key for learning in the classroom, and different levels of engagement have led to greater learning. The ICAP framework distinguishes these different levels of engagement by different overt behaviors, but little is known about how to measure different forms of engagement in the classroom. This article will...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
The Construction industry is one of the most hazardous industries in the US.Construction workers, on a daily basis, are exposed to numerous risks while performing arange of activities involving construction, alteration, and or repair. Dust and diesel exhaustemissions from construction equipment are considered harmful to the workers in the longrun....
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
The Experimental Advanced Airborne Research Lidar ‐ B (EAARL‐B), which was built and deployed by the U.S. Geological Survey (USGS) in 2014, is a novel topographic‐bathymetric lidar system. While retaining a number of features that were pioneered in the original National Aeronautics and Space Administration (NASA) EAARL system (e.g., low...
Internal curing is a term used to describe a process in which curing water is provided to a concrete mixture from inside the mixture. Internal curing water has typically been provided in North America mixtures by using prewetted porous materials, like fine lightweight aggregate (FLWA). Alternative materials, such as superabsorbent...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
The first goal of this master’s thesis was to investigate the linkage between a non-destructive testing method, surface resistivity, and premature concrete deterioration brought on by chloride ingress and or freeze-thaw cycling. The experimental method for this project consists of taking surface resistivity measurements of reinforced concrete slabs after they...
Due to a general reduction in pavement program funding levels over the past decade, the current budget is not sufficient to maintain roadways at a high level of service with acceptable roughness levels. Rough roadways with poor ride quality increase drivers’ vehicle operating costs (fuel consumption, vehicle maintenance, and tire-wear)...
The near-surface region of a coastal sediment bed is complex and dynamic. At some sites, near-surface sediment deposits are susceptible to extreme events, such as tsunamis or other large overflows, which induce high shear stresses on the sediment bed. The specific properties of sediment beds subjected to such extreme loading...
While riding bicycles has been promoted for its health, economic, and environmental benefits, it also complements other modes to complete a safe, efficient, and reliable transportation system. However, the dramatic increase of bicycle usage in the U.S. is accompanied by a growth of bicycle crashes. The U.S. Department of Transportation,...
Ground failures, in particular landsliding, liquefaction and lateral spreading can be triggered by seismic sources. The frequency, magnitude, and impact of these ground failures are highly dependent on the topography and geology of the site including its slope, depositional environment, and geotechnical properties as well as the proximity of the...
Significant amounts of uncertainty owing to both modeling decisions and inherent randomness are present in simulating the material and geometric nonlinear response of structural systems to extreme loading. Computing the sensitivity of structural response with respect to model parameters indicates which parameters have the largest affect on the response, which...
The blast technique has been used as an effective soil improvement method to compact loose coarse-granular soils since 1930s, and the use of the blast technique is extended as an application of in-situ liquefaction testing to investigate the performance of full scale foundations and countermeasures against liquefaction in recent decades....
This dissertation studies the coupled fluid-structure interaction (FSI) of a wave energy converter (WEC) and evaluates the design of a WEC mooring system. The research is conducted in support of conceptual development, field test and performance evaluation of WECs as part of the mission of the Northwest National Marine Renewable...
Tsunami loading can cause sediment instability, which can compromise the structural integrity of coastal buildings and infrastructure. To understand the process by which a tsunami can cause sediment instability, it is necessary to understand how the pore water pressure in the soil changes during tsunami loading. Tsunami run-up causes the...
State Departments of Transportation (DOTs) are the primary owners of roadway infrastructure in the United States. Many of the employees of state DOTs work on roadway work sites, putting them at disproportionately higher risks of injury or fatality. A review of the literature determined that a combination of policies, standards,...
Increasingly congested surface transportation network in urban areas and grow-ing land values make underground transportation systems more attractive for high-ways (i.e., tunnels) and metro system compared to other options [1]. An underground transportation system can preserve the land above for recreational parks, commer-cial buildings, residential homes, or other purposes while...
Students in undergraduate engineering programs typically do not synthesize content learned from disparate course work until the end of their final terms of college. As an example, in undergraduate civil engineering programs, transportation engineering concepts (e.g., geometric alignment, asphalt design procedures) and geotechnical engineering concepts (e.g., shear strength of soils,...
To derive ellipsoid heights on passive marks with cm-level accuracy, many current specifications require the collection and adjustment of long-duration, static Global Navigation Satellite System (GNSS) sessions. To increase efficiency, a survey procedure that includes real-time kinematic vectors from a real-time GNSS network (RTN) was evaluated. Thirty different “hybrid” networks...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
Real time networks (RTNs) have become popular for Global Navigation Satellite System (GNSS) surveys because highly accurate positions can be derived in seconds to minutes compared to hours as required with static sessions. To evaluate the accuracy of these shorter-duration, RTN GNSS observations and their potential for use as a...
A significant number of historically existing wetlands that naturally stored rainwater and attenuated flood peaks have now been drained and employed as new farming areas. Beyond the water quality and flow problem, this has resulted in loss of natural habitats of diverse ecological species. Restoring wetlands have hence been proposed...
Student engagement in a course plays a vital role in a student’s ability to process and construct knowledge. Student engagement research has investigated how students engage in and out of the classroom on a macro scale, through observation and survey data collection of large student populations, which lack focus on...
Bridge inspections are vital for monitoring the health and serviceability of transportation infrastructure throughout the world. However, inspections can be logistically-challenging, expensive, and dangerous. For example, inspections may require climbing, as well as the use of scaffolding, ladders, rescue boats, bucket trucks, and/or under-bridge inspection vehicles. Small, multirotor unmanned aircraft...
Numerical models are effective tools for simulating complex physical processes such as hydrodynamic and water quality processes in aquatic systems. The accuracy of the model is dependent on multiple model parameters and variables that need to be calibrated and regularly updated to reproduce changing aquatic conditions accurately. Multi-sensor water temperature...
Optimization of reservoir operation is involves various competing objectives for a scarce resource (water). To find the optimal operation of reservoirs, it is essential to consider multiple objectives simultaneously. There are various sources of uncertainty associated with the reservoir operation problem that should be considered as well.
The overarching goal...
Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...
Improving safety education could contribute to the preparation of better professional engineers. Safety topics are not holistically embedded in transportation course curricula. This thesis explores the current state in which safety is being incorporated in transportation course curricula in terms of design and compares the uses of safety data in...
Evaluation of teaching is used to examine and improve teaching quality in higher education. The literature consists of best teaching evaluation practices that have been developed, yet there is little research that has been conducted which investigates teaching evaluation practices in engineering programs. This thesis represents two manuscripts that explore...
Over the past two decades, the Lean Construction academic and practicing engineering community has used lean practices and tools to help improve the performance of the Architecture, Engineering, and Construction (AEC) industry. Lean practices have led to improved competitiveness of construction companies that have adopted them, by focusing on ways...
Large numbers of reinforced concrete (RC) bridges were built in the past that are now considered seismically deficient. The structural members most likely to be considered deficient are the supporting columns. Typical deficient columns contain inadequate transverse reinforcement and poorly detailed lap splice lengths above the foundation. Insufficient lap splice...
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
A wave-by-wave forecasting system is desired for optimization of wave energy conversion devices and for improving safety of vessel-based marine operations. This study outlines the first validation attempts of a recently developed forecasting system called Wavecast. The forecasting approach uses X-Band marine radar images for data assimilation, then reconstructs and...
The Cascadia Subduction Zone has recently been identified as a source for an impending great earthquake. The potential of a large earthquake has created widespread interest into the resiliency of lifelines within the potentially affected areas. One critical lifeline is the electrical distribution and transmission systems which relies on legacy...
Flexible pavements consist of multilayers, which form the pavement structures. Since the strength of the bond at interface between layers plays a significant role in improving the structural integri-ty and the performance of pavement structures, tack coat materials and methods used for their application during construction are important in providing...
In this thesis, the effectiveness of the 100 percent + XX percent seismic response directional combination rule available in codes and standards is evaluated using simulated nonlinear seismic response of two existing multi-story reinforced concrete plan-irregular buildings. The 5-story and 8-story buildings were designed according to the 1975 seismic codes...
This thesis provides a comparison of advanced econometric frameworks to account for unobserved factors in crash reported data (also referred to as unobserved heterogeneity) while identifying contributing factors by roadway classification for heavy vehicle injury severity and crash rates. The presented thesis provides two manuscripts that expand the literature regarding...
CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...
Aging and deficient infrastructure has become a major problem throughout the world. This is particularly evident in the case of reinforced concrete (RC) bridges. The cost of replacing these bridges is often prohibitive, thus engineers must find ways to strengthen them. Many older RC bridges predate the modern understanding of...