A generalized, three-dimensional, finite element bridge model was created in order to efficiently and accurately assess live-load girder distribution factors for a variety of bridge types. This model shortens the time required by bridge analysts to develop individual finite element models for bridges of varying geometries. The creation of the...
Fire hazards threaten human life and property safety. Since it is unrealistic to study human behavior during a real fire hazard, computational tools are a better choice to computational tools are a better choice to simulate fire growth and human behavior for predicting evacuation performance in chaotic emergency situations. Although...
An investigation was made to test the method of Head on the
flow about a circular cylinder with suction. The method of Head is an
approximate method of obtaining solutions to the boundary layer equations.
The method was adapted to the digital computer to facilitate
performing the calculations, and a...
Chloride-induced corrosion is one of the primary causes of the degradation of reinforced steel in concrete structures. Currently, the rapid chloride permeability test (RCPT) is the most specified method to determine the concrete’s resistivity to chloride ingress, thus a determining factor in assessing the durability of concrete. While it is...
Predetermining the ultimate capacity of piles driven into purely
cohesive soils and purely cohesionless soils involves, respectively,
the consideration of soil shear strength in a completely undrained and
a completely drained condition. For the intermediate cases concerning
soils that possess both cohesion and internal friction (silts, clayey
silts, sandy clays,...
Debris generated after a disaster event must be disposed efficiently for community recovery. This is a significant operation that accounts for up to 27% of the total recovery costs. Generally, debris removal takes place in two phases: the short-term relief phase, which involves debris removal immediately after a disaster to...
Aggregate piers have been used for centuries, with increasing occurrence in the last few decades. Their usage has been driven by land development demand and enabled through equipment and engineering improvements. Understanding the principles controlling bearing capacities and serviceability performance has been an ongoing area of interest for structures supported...
A Langmuir sorption model incorporating a second step of
irreversible absorption was applied to a model soil system. The column
was packed with cellulose triacetate; pulse and step input tests with
3,4-dichlorophenol were performed; the effluent concentration was
measured by electron capture detector gas chromatography and sorption
rate constants were...
Understanding the processes involved in the transport of dissolved gas plumes in groundwater aquifers is essential for comprehending the effect that these transport processes can have on site characterization and remedial design applications. Previous laboratory and field studies have indicated that dissolved gas transport in groundwater can be greatly affected...