The present status of plastics is one of constant change, but
this thesis attempts to focus attention on the state of the industry as of
1967. Beginning with a brief title definition and history of plastics,
the writer proceeds to a discussion on the structural characteristics
of plastics. Under this...
The effects of boundary geometry on internal density currents
in a density stratified reservoir were investigated in a laboratory
model. When water was simultaneously withdrawn and admitted to
the reservoir, a complex current regime was established. The general
flow pattern is described, and the influence of physical variables
on the...
A need has existed for an in-depth structural analysis of penstock
bifurcations because they form an integral part of hydroelectric
power plants. Their geometrical complexity has prevented classical
structural analysis from providing an accurate and overall picture of
the stresses in the structure.
Digital computers and the development of finite...
This report presents the findings of a sediment analysis
program formulated to determine the flushing potential
of various shaped small boat marina basins. Chemical tests
regarding volatile solids, Kjeldahl nitrogen, grease and
oil, and sulfides were performed with the results compared
to established sediment quality criteria. These results
were used...
The biochemical degradation of domestic sludge deposits exposed to benthic marine conditions was investigated using a laboratory Deep Sea Simulator. The rate and extent of deposit stabilization were determined for select hydrostatic pressures and hydrogen acceptor conditions by monitoring depletion of particulate organic carbon in 2.0 and 3.0 centimeter deposits....
The northern Oregon coast suffers extensive loss of land as a result of landslides which constitute the primary mechanism of coastline recession. Both real property and structures along the coast have been destroyed and this destruction will continue. In certain instances, it may be feasible to protect property by engineered...
Rubber-modified asphalt pavements have been used in Sweden and the United States since the 1970's. In these applications ground recycled tire particles (0.25 inch minus) are added to a gap-graded aggregate and then mixed with hot asphalt cement. The benefits of adding rubber to the mix include increased skid resistance...
The biodegradation of five polychlorinated biphenyls (PCBs) by
Hudson River and Silver Lake sediments was studied using gas
chromatography with electron capture detection (GC/ECD) and gas
chromatography with mass spectrometry (GC/MS) analyses. Methanogenic
sediments from the Hudson River and Silver Lake were used to inoculate
four anaerobic filter reactors. The...
Many of the analytical techniques that are currently available are not capable of
analyzing the offtracking of truck and trailer combinations or the path of load overhangs
through a set of curves that are commonly found on forest roads. Advances in the
processing speed of microcomputers have made it possible...
Deposition of the Middle Devonian part of the Denay Limestone
and Bay State Dolomite in the northern Antelope Range and Fish
Creek Range, respectively, took place on and in front of a carbonate
platform with a lime sand shoal at the shelf edge. In the Givetian part
of the Denay...
Knowledge of a compound's degradation pathway is crucial to the assessment of risk at contaminated sites. Pentachlorophenol and its metabolic products can serve as model compounds to study the fate and transport of halogenated aromatic compounds in the environment. Acclimation of anaerobic sewage sludge to pentachlorophenol produced a microbial consortium...
An optimization methodology, algorithms, and computer program for
cable/lumped-body deployment system are developed for the design and installation of
sonar packages in deep ocean ranges. In addition, a methodology and algorithms for the
control of the system are proposed.
A penalty function is developed in terms of the system parameters...
This study presents a rational process with supporting data to establish
appropriate road design controls, criteria, and standards for low volume
recreation and resource development. Much of the information presented can
be used to supplement design data presented in a National road design policy
published by the American Association of...
A commercially available, three-dimensional (3-D) finite-element (FE) analysis
program was used to model metal-plate-connected (MPC) joints in wooden trusses.
The model's features included consideration of material properties, teeth-to-grain-to-direction-
of-force orientation, and wood-to-wood contact. Non-linear spring elements,
placed on the wood surface between wood and plate, were used to represent wood-to-teeth...
The objectives of this research were to evaluate the
behavior of actual metal-plate-connected (MPC) tension-splice
and heel wood truss joints under seismic loads from the
Northridge earthquake (tension-splice joints only) and under
loads from a large artificial earthquake (1.0 g's and 0.67
g's maximum horizontal and vertical accelerations,
respectively). A...
Metal-plate-connected (MPC) trusses have traditionally been designed based on a
tributary load distribution and a simplified truss model. This design method ignores the
load-sharing and composite action in MPC roof truss systems, the semi-rigidity of MPC
joints, and joint eccentricity.
The main objective of this study was to provide a...
River regulation imposes changes in the supply of sediment and the frequency of competent flows. As a result, impounded rivers often exhibit downstream changes in channel processes, particle size, and morphology. The magnitude of change in competent flow frequency and sediment load together can be used to predict the pattern...
Attention has been drawn to the observation that environmental benefits under the current regulatory approaches are diminishing with respect to increased pollution control costs. Regulators have begun to appreciate that while environmental gains can still be achieved under the current command and control system, the most significant environmental gains have...
The objective of this research was to develop a one-third scale model of full-size
(prototype) metal-plate-connected (MPC) wood truss joints using similitude theory. The
prototype metal connector plates in MPC joints were modeled using thin galvanized sheet
metal and short staples. Truss grade wood material was ripped to one-third scale...
The objective of this research was to evaluate the duration of load factor for
metal-plate-connected (MPC) truss joints subjected to various cyclic loading conditions.
Heel and tension-splice joints from a standard 30-foot span Fink truss constructed from
nominal 2x4 Douglas-fir lumber were tested. A testing frame similar to that developed...
At Site-300, Lawrence Livermore National Laboratory (LLNL), CA,
trichloroethene (TCE) is present along with tetraalkoxysilanes such as tetrabutoxysilane
(TBOS) and tetrakis(2-ethylbutoxy) silane (TKEBS), as subsurface contaminants.
Intrinsic transformation of TCE to cis-dichloroethene (c-DCE) was observed in the
groundwater at locations co-contaminated with TBOS or TKEBS. Attenuation of TBOS
and TKEBS...
As part of a roof framing system, light-frame wood trusses often require lateral bracing to reduce the effective length for flexural buckling of compression web members. This observational research investigates the design requirements for discrete compression web bracing intended to provide such lateral support. Four simple brace analysis methods based...
Several potential sorbent materials containing iron oxides were prepared and evaluated for potential to remove divalent metals from waste waters. These included a ferrihydrite-coated sand, maghemite incorporated in Dowex[Trademark] ion exchange resin, gothite and two thermally activated ferrihydrites. Attempts to prepare sorbents from steel shot by coating with ferrihydrite or...
This study presents a practical method to model an actual Metal-Plate-
Connected (MPC) roof truss assembly using a commercial program, SAP2000, to
investigate its system performance. Truss assembly modeling was examined
because the conventional single truss design method ignores system effects, such as
variability of modulus of elasticity (MOE), interaction...
This microcosm study demonstrated the enhanced anaerobic transformation of vinyl chloride (VC) to ethylene. A previous microcosm study from Point Mugu site showed the accumulation of VC due to the slow transformation step of VC to ethylene. To overcome the rate-limiting step, two laboratory experiments tested the effect of trichloroethylene...
A method is described for determining the partition coefficient, K, for radon gas
distributed between an aqueous phase and an organic solvent. The method uses
sequential extractions of radon into equal volume aliquots of organic solvent. The
radon-laden organic liquid is then counted on a liquid scintillation analyzer with alpha-beta...
The nonlinear response of an ocean system subjected to random excitations can exhibit very complex dynamic behaviors including jump phenomena and coexistence of attractors. In this study, the stochastic system response behavior of a simple (Duffing) oscillator under narrow-band random excitations is first examined in the subharmonic resonance region. A...
A spreadsheet-based transport model was developed in Microsoft Excel™ as part of a six-year National Cooperative Highway Research Program project conducted at Oregon State University. The model simulated the leaching, transport, removal, and retardation processes that occur in the surface and subsurface pathways of the near highway environment. For all...
The objectives of this study are: (1) to evaluate the effect of reference
displacement on wall behavior under fully reversed cyclic loading using the
CUREE test protocol and (2) to assess damage accumulation (visible fastener
damage and stiffness degradation) for the imposed drift levels. All tests were
conducted on identical...
Friction dampers have been used successfully to dissipate seismic
energy in steel and concrete structures. The application is new to timber
structures. The objectives of this research were to design a slotted bolted
connection (SBC) and evaluate its potential as a passive energy damper in
timber brace.
The research was...
Mycobacterium vaccae JOB5 and Graphium sp. were studied to evaluate their ability to cometabolize methyl tert-butyl ether (MTBE) and its metabolites after growth on two different alkanes, propane and iso-pentane. Both cultures were capable of cometabolizing MTBE and the metabolites, tert-butyl formate (TBF) and tert-butyl alcohol (TBA). MTBE, TBF, and...
This project report presents a laboratory investigation of the dynamic behavior of saturated alluvial silty soils from sites in Oregon and Washington. The focus of the study was to document the liquefaction susceptibility, post cyclic strength, and volumetric strain behavior of the silt soils based on cyclic, undrained triaxial compression...
The objective of this study was to determine the effect of misplaced hold-downs
on the static and cyclic behavior of wood shear walls. Three shear wall
configurations were considered in this study. The first configuration (control) had
hold-downs at the ends of the wall (wall type 1), the second configuration...
The goal of this research was to mathematically simulate the ability of bioaugmented microorganisms to aerobically cometabolize a mixture of chlorinated aliphatic hydrocarbon (CAH) compounds during in-situ treatment. Parameter values measured from laboratory experiments were applied to the transport model with biotransformation processes included. In laboratory microcosm studies, a butane-grown,...
The research presented here is a study to determine the effect of shear reinforcement corrosion on the shear capacity in conventionally reinforced concrete (CRC) bridge elements. A total of 14 CRC beams were tested using three stirrup spacings (8, 10, and 12-inch). Six of the beams included the influence of...
This study investigated the use of radon-222 as an in situ partitioning tracer for quantifying nonaqueous phase liquid (NAPL) saturations in the subsurface. Laboratory physical aquifer models (PAMs), field experiments, and numerical simulations were used to investigate radon partitioning in static (no-flow) experiments and in single-well, 'push-pull' tests conducted in...
The 1,1-dichloroethene (1,1-DCE) cometabolic transformation abilities of indigenous and bioaugmented microorganisms were compared in microcosms constructed with groundwater and aquifer solids from the Moffett Field site, CA. Microbial community structure in the microcosms and possible community shifts due to 1,1-DCE transformation stress was evaluated by terminal restriction fragment length polymorphism...
In recent years, log structures have been marketed as an alternative
to conventional light-frame wood structures. Log structures are constructed
using round timbers (or manufactured timbers) that are stacked vertically
and have interlocking corners. Thru-rods and lag screws are used to
provide inter-log connections. This project was conducted to evaluate...
An experimental study of a passive energy dissipation tension-compression yielding brace or buckling restrained brace has been conducted. The Confined Yielding Damper (CYD) consists of a steel yielding core confined within a tube filled with non-cohesive media. The external tube and confined non-cohesive media provide lateral stability to the core...
Engineering analysis of heavy timber structures under dynamic loads
is generally lacking. Some literature suggests that heavy timber structures
are stiffer than expected, but popular engineering opinion is to the contrary.
In addition, prior research has shown that passive friction dampers can be
used in timber structures for the intended...
This dissertation presents the results of a research effort conducted to better understand the seismic performance and analysis of pile-supported wharves. Given the limited number of well-documented field case histories, the seismic performance of pile-supported wharves has been poorly quantified, and the analysis methods commonly employed in engineering practice have...
The aerobic transformation of TCE and cis-DCE by a tetrabutoxysilane-grown microorganism (Vancheeswaran et al., 1999) led to the investigation of novel substrates, including benzyl alcohol, for promoting cometabolism. The culture grew on carboxylic compounds and alcohols, but did not grow on formate, methanol, methane, propane, butane, ethylene, benzene, toluene, or...
On August 31, 1992, Quality Printing Circuits, a circuit board manufacturing plant in Phoenix, Arizona, burned to the ground. The fire lasted approximately eight hours, creating a thick, black smoke that blew into the surrounding community. Emergency evacuation was erratic and since no air samples were taken during the fire,...
Shallow land burial in vadose zone sediment at the Hanford Site in Washington is being considered for the disposal of Category 3 low-level waste. A series of column experiments were conducted to evaluate and model the performance of the soil surrounding the trench encasement material for iodine-129 and technetium-99 by...
Groundwater at Oak Ridge National Laboratory's Field Research Center (FRC) is contaminated with U(VI) and Tc(VII), has pH values as low as 3.3, and nitrate concentrations as high as 120 mM. The objective of this research was to determine if in-situ bio-immobilization is a viable treatment alternative for this water....
This study investigated complete reductive dechlorination of chlorinated aliphatic hydrocarbons (CAHs) over a broad range of concentrations. Tetrabutoxysilane (TBOS), as a slow-release anaerobic substrate, was studied for enhanced reductive dechlorination of tetrachioroethylene (PCE) present as a dense non-aqueous liquid (DNAPL). Four different site-mixed cultures were used in the study: Site-300...
Laboratory and modeling studies were performed with a mixed-anaerobic-culture obtained from the Evanite site in Corvallis, Oregon. The culture completely transforms trichloroethene (TCE) to cis-dichloroethene (c-DCE), vinyl chloride (VC), and finally to ethene. Acetylene inhibition studies were used to examine the culture's microbial activities. Kinetic studies determined the half-saturated constant...