Characterizing stakeholder behavior when making decisions in watershed management is a great challenge for planners, not only because plans are associated with physical uncertainties but also because stakeholders’ behaviors are influenced by numerous factors. Since stakeholders’ decision-making is linked to multiple types of uncertainty, communication of uncertainty to stakeholders by...
Traditional braced frames are an efficient and economic means of resisting seismic demands. However, braced frames are prone to story mechanisms, which can result in concentrations of demands and damage during seismic events. Including steel strongbacks in conjunction with traditional braced frames can mitigate story mechanisms. The SBF results in...
As coastal communities face increasing chronic and acute hazards, nature-based coastal engineering solutions have experienced a rapid growth in popularity and interest. Recent works on this topic have shown that “Green Infrastructure” may be effective at mitigating coastal hazards and therefore provide sustainable adaptation alternatives to traditional engineering solutions such...
A wide variety of hydrodynamic theories are utilized to approximate a Wave Energy Converter’s (WEC) equation of motion. Numerous theories have been refined in order to improve numerical approximations of WEC dynamics. When incorporating refined hydrodynamic theories into numerical models, there are distinct impacts on WEC rigid body motions, cable...
The coast of Oregon is highly dynamic, with beach and dune morphodynamics constantly evolving in response to physical and ecological forcing at scales ranging from seconds to decades and meters to tens of kilometers. Evaluating spatial and temporal trends in shoreline evolution is paramount in understanding and eventually developing a...
The goal of this thesis is to ease the adoption of energy-efficient (EE) building strategies for affordable homes in the United States (US). Low-wage earning households spend nearly three times the proportion of their gross annual income on home energy bills resulting in higher energy burden for them when compared...
Post-tensioned (PT) self-centering shear walls were designed to reduce structural damage from seismic activity. However, these lateral force resistant systems experience post-tension loss negatively affecting the re-centering capability due to delayed deformations experienced by engineered wood products over time. The long-term mechanical response of mass-timber panels to in-plane PT loads...
The coastal region is home to many types of surface fronts that exist on a submesoscale (1-10 $km$). While in situ observations capture point or transect observations of frontal behavior subsurface, their complex spatial patterns can be well-captured using remote sensing techniques, which provide synoptic views of the ocean surface...
Wind flow on vegetated coastal foredunes adapts to the local canopy drag, resulting in spatial gradients in bed shear stresses which contribute to the formation of localized bedforms (e.g., nebkha, shadow dunes). Numerous morphological properties of the plants, including canopy height and density, affect the wind flow dynamics and therefore...
Highway work zones are extremely dangerous environments due to the presence of workers near high-speed traveling vehicles. This dynamic environment results in a disproportionate number of accidents that cause injury and casualty to both drivers and workers due primarily to vehicular intrusions into work zones. Several emerging work zone intrusion...
Timber-concrete composite (TCC) solutions originated in the early twentieth century. There has been a renewed interest in TCC solutions in modern mass timber buildings, especially for floor systems. However due to lack of data, design standards, and code acceptance, TCC solutions require that new mass timber solutions be tested, and...
Many older reinforced concrete bridges and buildings in the United States are considered deficient due to past design codes that are not conservative, increased loading, and deterioration of structural components. Deterioration is most commonly caused by corrosion, which reduces the steel cross sectional area and damages the concrete cross section....
To ensure the safety of the nation’s bridges, the National Bridge Inspection Standards (NBIS) require all bridges to undergo routine load rating analyses to assess their structural capacity. Accurate geometric information for each structure is necessary for load rating analyses. This information is typically ascertained from as-built plans. Still, when...
With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
Pile caps are structural elements used to transfer loads from columns to a group of piles, which transfer them to stronger soil layers. Pile cap with horizontal distance between the column and piles less than twice its effective depth is categorized as "deep," where significant nonlinear strain distribution occurs through...
Climate change has pervasive impacts on Earth’s diverse ecosystems. Observed and projected effects that impact coastal environments pose unique challenges. Coastal regions provide numerous ecosystem services (e.g., fisheries, nursery habitats, erosion control, and water filtering and detoxification), house 40% of the US population, and contribute to 58% of the national...
Frequent 3D spatial mapping of estuaries is critical to understanding and modeling changes that can impact ecological health (e.g., water quality) and ecosystem services (e.g., aquaculture, nutrient cycling, and shoreline stabilization). However, obtaining accurate, repeat topobathymetric data for estuaries is a major challenge. Because shallow estuaries are typically not used...
Marine debris is a chronic and increasingly pervasive problem for coastal regions around the world. Debris poses environmental risks, threats to wildlife, and degradation of the natural environment. Recent research has shown the advantages of uncrewed aircraft systems (UAS) for detection and recognition of marine debris, including the ability to...
This thesis builds on a modeling tool that has been developed to link thermodynamic modeling and concrete performance. This tool is intended to predict the performance for modern concrete mixtures made with ordinary portland cement (OPC), conventional and novel supplementary cementitious materials (SCMs), and limestone (Ls). The first part of...
Centerline rumble strips (CLRS) have proven to be a cost-effective safety measure in reducing lane departure crashes. However, there are often unintended consequences associated with the installation of CLRS, particularly in rural mountainous areas or snow zones. These consequences include the accumulation of water and ice on the roadway and...
Signalized intersections often provide pushbuttons to call for pedestrian service to minimize conflicting movements between road users. Signalized midblock crossings typically increase safety for pedestrians in locations with high traffic volumes and multiple lanes in each direction. However, unnecessary vehicular delay occurs from “ghost” pedestrian intervals when someone activates the...
Since the collapse of World Trade Center building number seven (WTC7), significant research has been done to understand the behavior of steel structures in fire and enable engineers to account for the behavior of steel framing systems exposed to fire during design. Despite these efforts, there are still significant barriers...
It is considered best practice when designing pedestrian access at intersections to provide two curb ramps at each street corner. In Oregon, there are many locations where long ramp runs cause curb ramps to be set back a significant distance from the apex of the intersection corner to meet this...
Conflicts and disasters displace millions of populations worldwide. There is a need for rapid and affordable housing to cater to the needs of the displaced and unhoused population. Experience from previous post-disaster responses shows that temporary housing should be rapidly deployable, planned for months to years, and should be environmentally...
Projects in forestry and civil engineering depend on accurate information, which is often acquired through remote sensing techniques. One of the remote sensing technologies that has gained importance in the last decade is light detection and ranging (lidar), which describes the surveyed area with 3D points, presented as point clouds....
The Cone Penetration Test (CPT) has been widely-adopted for rapid, cost-effective exploration of the subsurface and reduction in the effort associated with drilling, sampling, and laboratory testing of soil. The adoption of the CPT has stemmed in part to the correlation of measurements to preliminary soil classification, stress history, drained...
Scour is the main cause of bridge failures in the United States. Bridge failures raise a hazard to the safety of the traveling public as well as the massive economic consequences due to the high cost of constructing a new or a replacement bridge. The Oregon Department of Transportation (ODOT)...
Submerged aquatic vegetation (SAV) species, such as seagrasses, are highly valued in estuaries because of the many economic, ecological, and cultural services that they provide, including shelter for fisheries, minimizing water turbidity, and improving am-bient water quality. SAV can also alter its physical environment by attenuating wave and current velocities,...
Background: Studies indicate that problems utilized in traditional undergraduate engineering education do not adequately prepare students for the workforce. Calls to implement authentic, ill-structured problems into upper level engineering experiences may address this issue but adopting authentic engineering problems without considering barriers to adoption of faculty has not been fully...
Urban stormwater runoff with a high impervious area can significantly impact pollution concentrations of receiving water bodies. The use of low impact development (LID), which mimics the hydrological properties of the site before development, has been studied in an increasing number of studies, and the available database has shown to...
Lean construction and construction industrialization have been the focus of the construction industry in recent decades. Lean construction has been shown to reduce waste and uncertainty, and construction industrialization has a positive effect on improving efficiency and safety. Research on lean construction shows that lean construction practices are recognized by...
There are many existing bridges around the world that were designed without consideration for seismic effects. Many of these bridges were designed before modern earthquake engineering design standards and practices existed and thus are expected to perform poorly during strong ground shaking. Common structural deficiencies are found in their reinforced...
Considering the deadly impacts of commercial motor vehicle (CMV) crashes on road safety, many previous studies have put in efforts to find the determinants of CMV crash injury severities. However, studies examining the impact of the different number of lanes on CMV crash
injury severities are lacking. Besides, the importance...
In coastal and ocean engineering, understanding the ocean environment and the forces from waves, tsunamis and waterborne debris on structures and floating bodies is an important aspect of designing safe and effective infrastructure. Understanding the impact of these forces on structures becomes an important question in the design process. Answering...
The behavior of mass timber beam-to-column connections under seismic loading is not yet well understood. Mass timber beam-to-column connections must have the ability to maintain load-carrying capacity despite the deformations that will be imposed on all components of the building during seismic events. This behavior is called deformation compatibility. The...
Engineering education research has led to a greater understanding of the gap in preparedness of students for the engineering industry. Multiple studies comparing the workplace and academic contexts and the participants in those contexts (i.e., students, faculty, and engineering practitioners) have emphasized similarities and differences between the two contexts by...
Diatomaceous soils are a geological material whose engineering properties do not readily conform to the widely accepted and used mechanical and behavioral frameworks. This ambiguity results in design difficulties and geotechnical failures which can be costly. Diatomaceous soils have diatoms in their matrix. Diatoms are unicellular algae with an inert...
As e-commerce and urban deliveries spike, there is an increasing demand for curbside loading/unloading space. However, commercial vehicle drivers face numerous challenges while navigating dense urban road networks. Previous literature on the topic of how commercial vehicle drivers make choices about when and where to park is scarce, and data...
Previous research has found some bicyclists disregard circular red indications and stop signs. Possible justifications include a desire to increase safety, save energy, save time, and increase visibility. Because of this, many bicyclists feel as though stopping at stop signs, especially in the absence of conflicting vehicular traffic, is an...
Previous research has shown that traveling in a work zone involves a higher risk of crashing compared to normal (non-work zone) driving conditions. Research further suggests that the severity of work zone crashes is greater on average than non-work zone crashes. The period of time in which the traffic control...
This thesis focuses on the fundamental behavior of CLT floor-to-wall connections during a fire.
Cross-laminated timber (CLT) panelized structures rely on floor-to-wall connections for the load path and stability of the structure. Additionally, the fire performance of these connections is critical to prevent horizontal or vertical fire spread within these...
A curb ramp is an indispensable ramp system in the transportation network that provides a transition between a sidewalk and a roadway. The Americans with Disabilities Act (ADA) requires that the design, construction, and maintenance of curb ramps meet the ADA standards. However, many existing curb ramps are noncompliant, as...
A vital aspect of concrete construction is quality assurance and control (QA/QC). Engineered structures must meet pre-determined and agreed-upon strength and durability requirements. Concrete falls into a specific category of infrastructure material because in most cases, these strength and durability requirements cannot be found until the material has at least...
Nearly 24% of Formerly Used Defense Sites (FUDS) containing military munitions are in the nearshore coastal zone with approximately 30% of those sites containing heterogeneous sediment compositions of gravel-sand. Previous exploration in munition mobility was performed on beaches of sandy or muddy bottoms leaving the influence of heterogeneous sediment properties...
The Manual on Uniform Traffic Control Devices prohibits positioning a bike lane right-adjacent to a vehicle turn-only lane to mitigate the potential for right-hook crashes. However, it provides no specific guidance on positioning with respect to bus-only lanes. This thesis describes a before/after safety evaluation of bike lanes positioned left...
Most of the concrete in the world is produced using hydraulic cement (ordinary portland cement, OPC) and siliceous or alumino-siliceous supplementary cementitious materials (SCM). Due to the shift in focus toward environmental sustainability within the construction industry, alkali-activated cementitious systems (AAC) have gained significant attention to reduce the carbon footprint...
Civil engineers frequently use lime to improve the mechanical properties of weak clayey soils. The production of lime is associated with significant CO₂ emissions. Sequestering carbon dioxide into the stabilized soil can effectively reduce the carbon footprint of the lime. In the presence of CO₂, unreacted lime in the stabilized...
Microbial-induced corrosion of concrete (MICC) is a multi-stage deterioration process caused by microbial activity in wastewater infrastructure. MICC is a worldwide issue due to the reduced service life of the wastewater infrastructure and the economic impact associated with increased maintenance and reconstruction costs. This thesis explores two critical aspect of...
Transportation agencies continuously strive to improve driving quality and highway safety, which are both highly correlated with the level of smoothness of the road. The International Roughness Index (IRI) is a widely adopted, standardized metric calculated from longitudinal profile data collected on the road. Inertial profilers are devices mounted to...
Coastal landslides and erosion are major natural hazards resulting in unstable slopes, constituting immense challenges to modern infrastructure. Developing, maintaining, and performing risk assessments of infrastructure on, or close to, these hazards require a detailed understanding of the geophysical processes destabilizing the slope. These efforts start with the collection of...