The corrosion and passivity of iron (and carbon steel) in media with different alkalinity as well as iron depassivation have been studied extensively using electrochemical methods and nano-scale surface characterization studies. The electrochemical techniques provide valuable information about the average electrochemical behavior of relatively large metal surfaces, typically in centimeter-square...
Coastal communities in the U.S. Pacific Northwest (PNW) are rapidly engaging with the idea that hazards and environmental pressures are changing and may be characteristically different in the near future. This has led to a need for scientific knowledge and tools that can help coastal communities prepare and build resilience...
Bio-cementation is a promising method for the liquefiable mitigation of loose saturated sands. In the improvement process a bacterium that can be found naturally in soil deposits is fed urea. The bacterium consumes and breaks down the urea to form ammonium and carbonate. In the presence of calcium, calcium carbonate...
In the presence of strong winds, ocean surface waves dissipate significant amounts of energy by breaking. Here, breaking rates and wave-following turbulent dissipation rate measurements are compared with numerical WAVEWATCH III estimates of bulk energy dissipation. At high winds, the measurements suggest that turbulent dissipation becomes saturated, however the modeled...
3D laser scanning has been used extensively in engineering reconnaissance surveys to capture perishable data in an efficient, reliable, and precise manner. Many insights on damage can be obtained from the data through various methods of post-processing; however, many of these techniques are often labor intensive. This delay reduces the...
This dissertation provides a comparison of statistical and econometric frameworks, using a previously unused freight data source, to study crash frequency by crash type and heavy-vehicle hard braking in Oregon. Hard braking can serve as a proxy for several factors, one of which is safety. Therefore, with the hard braking...
Lidar (LIght Detection And Ranging) is a remote sensing technology using light in the form of a pulsed laser, which enables efficient, accurate, 3-D data acquisition of a scene. Depending on the mounting platform, lidar data acquisition can be categorized into Airborne Laser Scanning (ALS, or airborne lidar), Terrestrial Laser...
Recent statistics regarding large truck crashes reveal that fatality rates of large trucks per 100 million vehicle miles traveled (VMT) and fatality rates per 1,000 registered vehicles are higher than those for passenger vehicles. These statistics underscore the need for greater efforts by safety professionals to help mitigate the impacts...
Boulder transport models have been used to develop a historical record of hydrodynamic events. This is done by evaluating the size, location, and composition of boulders that have been removed from their region of formation. Boulder transport is difficult to predict, even under laboratory conditions.
Experiments were conducted to evaluate...
An understanding of natural coastal hazards is essential for improving resilience of coastal communities. Effective management of coastal hazards relies on prediction tools and mitigation structures that have been designed to handle the dynamic coastal system. This dissertation is a collection of manuscripts that cover a diverse range of fundamental...
The logarithmic-spiral (log-spiral) limit equilibrium procedure for slope stability analysis rigorously satisfies both force and moment equilibrium with a failure surface geometry formulated as a function of the soil’s angle of internal friction. Within the framework of limit equilibrium, this procedure has, in the past, been primarily limited to homogeneous...
Bridge inspection is a critical task needed to monitor bridge quality and serviceability. In the U.S., 40% of bridges are more than 50 years old while most bridges are typically designed for a lifespan of 50 years. 9.1% of the 614,387 bridges across the U.S are considered structurally deficient. These...
Fire hazards threaten human life and property safety. Since it is unrealistic to study human behavior during a real fire hazard, computational tools are a better choice to computational tools are a better choice to simulate fire growth and human behavior for predicting evacuation performance in chaotic emergency situations. Although...
As ecoroofs have become more widespread throughout the U.S., it has become increasingly important to understand their structural behavior. The purpose of this research was to investigate the load effects exerted on a roof structure with an ecoroof during rain events and the subsequent drainage period, with the intention of...
Decreases in pavement program funding levels have encouraged paving agencies to adopt higher levels of recycled materials into their asphalt mixes. In order to fully evaluate the effects of recycled asphalt pavement (RAP) in Hot Mix Asphalt (HMA) mixes, the level of blending between the RAP and virgin binders in...
Cementitious materials are often characterized through the use of advanced analytical techniques to understand the macro-, micro-, and nano-scale properties, including phase formation during hydration, and subsequent potential deterioration mechanisms which can affect service life. A major limitation with using such analytical techniques to quantify solid phases in cementitious systems...
The construction industry is infamously recognized for having jobsites identified as hazardous working environments due to workers-on-foot commonly functioning at dangerous heights and in close proximity to other construction entities, among other reasons. These hazardous operations result in an increased risk of worker injuries and fatalities caused by fall hazards...
Aggregate piers have been used for centuries, with increasing occurrence in the last few decades. Their usage has been driven by land development demand and enabled through equipment and engineering improvements. Understanding the principles controlling bearing capacities and serviceability performance has been an ongoing area of interest for structures supported...
Left turn movements are considered to be the highest risk movements through an intersection, and can result in head on, angle, or side impact crashes. The flashing yellow arrow (FYA) for use as a permissive left turn phasing indication is relatively recent, first appearing in the 2009 edition Manual on...
While sophisticated plans have been adopted nationally and globally to increase bicycling’s share of daily commutes, safety concerns have negatively impacted targeted bicycling growth. Specifically, truck traffic plays a pivotal role in bicyclists’ perceptions of safety and comfort, because of the severe consequences of bicycle-truck collisions. Several types of engineering...
Recent statistics suggest that the construction industry continues to experience poor project performance. Specifically, construction productivity has witnessed a meager annual growth of 1% over the past 20 years while the industry constantly records both a high number of fatalities and a high fatality rates relative to other industries. The...
Autonomous vehicles (AVs) may have the potential to mitigate a significant proportion of serious crashes which are due to human error or poor decision making behind the wheel. However, there are still many concerns associated with SAE Level 3 AVs that require intervention by a human driver after a take-over...
Distracted driving is an adverse driving behavior that is widely known to impair the safety of all roadway users and traffic flow. Despite the extensive research efforts on the prevalence and effects of distracted driving on roadway safety and performance, the number of vehicular crashes and fatalities resulting from distracted...
The advancement of the cutting-edge technologies of advanced driver assistance systems (ADAS) hold promises to reshape the future of the transportation system. The concept of connected (CV) and connected automated vehicles (CAV) technologies are live examples of the future transportation. Vehicle communication technology is expected to impact conventional traffic conditions....
Anchoring systems are used to hold floating offshore devices (e.g., energy devices, oil platforms) to keep them on their stations. Anchors are embedded into the seabed soils. In some cases, the interface shear between anchor and seabed soils together with anchor self-weight provide the holding capacity of the anchoring systems....
This research asserts that flood risk perception of individuals living in floodplains influences their preparedness for taking actions to protect themselves from flood hazards. The results of this research are backed up by quantitative analysis of survey responses of individuals living in floodplains of Corvallis, OR in the USA. The...
Chloride-induced corrosion is one of the primary causes of the degradation of reinforced steel in concrete structures. Currently, the rapid chloride permeability test (RCPT) is the most specified method to determine the concrete’s resistivity to chloride ingress, thus a determining factor in assessing the durability of concrete. While it is...
A sewer geyser is a series of ejecting air-water mixture eruptions through vertical shafts of drainage systems. In field observed geyser incidents, manhole covers were blown into the air and they were followed by ejecting air-water mixture eruptions that lasted for several seconds at a time. Trapped air in sewer...
The U.S. Pacific Northwest is home to one of the most extreme wave climates in the world with waves of 10 m in height arriving to the coast approximately each year. With an average water temperature of 12℃, the beaches in the region are too cold to go on a...
Any work of literature is a product of its time revealing truths about its culture. My thesis explores how pre-selected inspiration, personal experiences, and current events play a role in the devising process of a script. The inspiration for this particular devised play is Letters to a Young Poet by...
Total emissions from the US contribute 15% to the global emissions. The construction industry is a major source of the exhaust emissions produced. Use of light-duty vehicles and heavy-duty trucks for various construction activities contributes 83% to the total greenhouse gases produced. Construction equipment comprises of on-road and non-road equipment,...
Internal stability of Geosynthetic-Reinforced Soil (GRS) walls are conventionally assessed using lateral earth pressure methods. Determination of these pressures is a key component of limit state design as it enables determination of mobilized resisting forces in reinforcements needed to ensure stability and function of the GRS structure. However, conventional methods...
Measuring resistivity as a method to calculate formation factor is becoming a popular way to evaluate transport properties of concrete. Resistivity measurements are dependent on multiple factors including the resistivity of the pore solution, leaching effects, the degree of saturation of the specimen, the age of the specimen (degree of...
Small unmanned aircraft systems (UAS) carrying consumer-grade nonmetric cameras are increasingly utilized to generate high-resolution 3D geospatial data. Low cost, ease of operation, widespread availability and low altitude maneuvering capabilities of UAS, as well as the rapid development of technology and methods, make UAS-based photogrammetry applicable to many civil engineering...
Pin and hanger assemblies are a common type of connection used in past engineering practice for steel girder bridges. The connection consists of pins, hanger plates, and girder ends. The connection detail was used widely between 1930 and 1980. The connections are considered fracture critical and nonredundant because connection failure...
The work of engineering education researchers has resulted in the development of research-based instructional strategies (RBISs) aimed at providing educators with means to increase student learning. Research has shown that there is a disconnect between the development of RBISs and their use by educators. Means to make new practices more...
Drilled shaft foundations provide significant geotechnical resistance for support of structures, such as highway bridges, traffic sign, and signal pole structures, and are used widely to meet their structural foundation requirements. The amount of steel reinforcement in drilled shaft foundations has increased over the past several decades to account for...
Interest in performance specifications has been growing in the civil and construction industry in the past decade. One major focus area has been on understanding how to prolong the service life of concrete structures, since repair and rehabilitation of existing infrastructure have cost many trillions of dollars. Deterioration mechanisms such...
Steel Slit Panel Frames (SSPFs) are an innovative and resilient lateral force resisting system. Steel Slit Panels (SSPs) are bolted to the beams and act as replaceable seismic fuses, dissipating energy through flexural yielding in links between vertical rows of slits. SSPFs have shown promise as a lateral force resisting...
With all of the efforts that have been conducted over the past 100 years since the first accident causation theory was published, the Accident Proneness theory by Vernon (1918), the construction still trails among different industries in terms of fatal and nonfatal work injuries. Theories and models that have been...
A significant number of Unreinforced Masonry (URM) buildings exist in the Pacific Northwest region of the United States of America that is a region of high seismicity, which could be subjected to both crustal and subduction zone earthquakes. The catastrophic and brittle failures associated with URM buildings in the past...
The role of ground motion duration on the seismic performance of civil engineering structures remains unclear. Thus, the role of earthquake strong ground motion duration is assessed in a three manuscript thesis, which includes: (1) assessment of the effects of ground motion duration on the seismic performance of a model...
Significant progress has been made over the past 20 years in developing models to estimate the service-life of reinforced concrete systems. The basic understandings of the mechanisms that control the transport of ions and moisture in concrete systems have been well researched and models for determining corrosion initiation, specifically chloride-induced...
Transportation systems are facing safety and operational challenges with a cost of billions of dollars annually in lost production time and wasted fuel. Infrastructure expansion, previously held as a panacea to most transportation challenges has lost its appeal due to financial, land-use and environmental constraints. Interest is surging in intelligent...
In the first quarter of the twentieth century, iron was commonly used to provide tensile resistance for preservation and restoration of historical buildings. A major factor contributing to increasing the deterioration and degradation of historic structures is corrosion of ferrous materials. One approach to avoid long-term degradation of iron and...
Liquefaction of saturated granular material due to cyclic loading can result in catastrophic damage to the built environment. The mechanics of liquefaction have been previously studied through field testing, physical modeling, laboratory experiments, and numerical simulations. However, significant questions remain with respect to the particle-scale behavior of granular materials during...
The capabilities of modern three-dimensional (3D) capture technology such as laser scanning and image-based 3D reconstruction are well suited to enhance the practice and research of civil engineering. However, given the often-overwhelming focus placed on the incredible capabilities of these tools and techniques, it is important to investigate the limitations...
There are over 130 million wood poles supporting electrical transmission and distribution lines in the U.S. The vast majority of these poles are preservative treated to prolong their useful life. In some cases, however, the depth of treatment is relatively shallow, leaving a deep zone of moderately durable, untreated heartwood....
Due to a general reduction in pavement program funding levels over the past decade, the current budget is not sufficient to maintain roadways at a high level of service with acceptable roughness levels. Rough roadways with poor ride quality increase drivers’ vehicle operating costs (fuel consumption, vehicle maintenance, and tire-wear)...
Ground failures, in particular landsliding, liquefaction and lateral spreading can be triggered by seismic sources. The frequency, magnitude, and impact of these ground failures are highly dependent on the topography and geology of the site including its slope, depositional environment, and geotechnical properties as well as the proximity of the...
The blast technique has been used as an effective soil improvement method to compact loose coarse-granular soils since 1930s, and the use of the blast technique is extended as an application of in-situ liquefaction testing to investigate the performance of full scale foundations and countermeasures against liquefaction in recent decades....
The first goal of this master’s thesis was to investigate the linkage between a non-destructive testing method, surface resistivity, and premature concrete deterioration brought on by chloride ingress and or freeze-thaw cycling. The experimental method for this project consists of taking surface resistivity measurements of reinforced concrete slabs after they...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
Student engagement is key for learning in the classroom, and different levels of engagement have led to greater learning. The ICAP framework distinguishes these different levels of engagement by different overt behaviors, but little is known about how to measure different forms of engagement in the classroom. This article will...
The Construction industry is one of the most hazardous industries in the US.Construction workers, on a daily basis, are exposed to numerous risks while performing arange of activities involving construction, alteration, and or repair. Dust and diesel exhaustemissions from construction equipment are considered harmful to the workers in the longrun....
This study uses an existing database of dynamic loading tests of driven piles installed in the Puget Sound Lowlands to improve the reliability of axial performance. First, the unit shaft resistances developed from stress wave signal matching to dynamic records of pile installation are used to develop an effective stress-based...
Internal curing is a term used to describe a process in which curing water is provided to a concrete mixture from inside the mixture. Internal curing water has typically been provided in North America mixtures by using prewetted porous materials, like fine lightweight aggregate (FLWA). Alternative materials, such as superabsorbent...
This thesis provides a comparison of advanced econometric frameworks to account for unobserved factors in crash reported data (also referred to as unobserved heterogeneity) while identifying contributing factors by roadway classification for heavy vehicle injury severity and crash rates. The presented thesis provides two manuscripts that expand the literature regarding...
Ecoroofs have become more prominent in recent years. However, there is currently no enforceable standard or building code for the design and construction of ecoroofs across the United States (Kraupa, 2014). Further research is needed to determine how ecoroofs respond to roof motion and to develop an appropriate design standard.The...
The implementation and construction of Mechanically Stabilized Earth (MSE) walls has undergone substantial expansions in recent years, owing to its relatively low cost, ease of construction, and high efficiency compared to conventional retaining methods. As a result, MSE walls are being constructed to greater heights with complex features (e.g. multiple...
Every year thousands of people are killed or injured in work zone crashes in the US due to excessive speed, distraction, inattentiveness, low visibility, and other factors. Roadway construction and maintenance operations often occur at night when the traffic volume is low, creating less congestion and delay to the traffic....
State Departments of Transportation (DOTs) are the primary owners of roadway infrastructure in the United States. Many of the employees of state DOTs work on roadway work sites, putting them at disproportionately higher risks of injury or fatality. A review of the literature determined that a combination of policies, standards,...
Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Increasingly congested surface transportation network in urban areas and grow-ing land values make underground transportation systems more attractive for high-ways (i.e., tunnels) and metro system compared to other options [1]. An underground transportation system can preserve the land above for recreational parks, commer-cial buildings, residential homes, or other purposes while...
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Traditional faculty development programs aimed at disseminating research-based pedagogy and innovations at potential adopters have helped increase awareness of these innovations; however, their adoption into engineering classrooms has been limited. This paper aims to present an alternative, pull-oriented approach to faculty development where faculty participants co-develop curricular innovations with engineering...
In the light of the changing climate, the importance of designing effective watershed management plans that are likely to be implemented is becoming ever more important. This research introduces a new concept, consensus, for incorporation into stakeholder-guided interactive optimization of watershed management plans. User preferences were mathematically simulated based upon...
Bicyclists are one of the highest and most vulnerable road users. This is due to the higher likelihood of being seriously injured when involved in a crash. This research seeks to understand two different behavioral interactions of an implemented facility user: the motorist (secondary user) and bicyclist (primary user). The...
In this study, the effects of implementing different wind input or physics packages in a numerical wave model to recreate large wave conditions are explored. Three large wave events are simulated with WaveWatch III. The wind inputs which are compared are NCEP's Global Forecasting System (GFS) with 0.5 degree resolution...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...
Many publications, documents, codes and guidelines exist related to the seismic evaluation and rehabilitation design of existing buildings. This report discusses the assumptions and methods employed for investigation of two wood structures using four references: FEMA 154, FEMA 356, ASCEI per SEI 31, and 1997 UBC. The screening performed using...
Rubber-modified asphalt pavements have been used in Sweden and the United States since the 1970's. In these applications ground recycled tire particles (0.25 inch minus) are added to a gap-graded aggregate and then mixed with hot asphalt cement. The benefits of adding rubber to the mix include increased skid resistance...
The near-surface region of a coastal sediment bed is complex and dynamic. At some sites, near-surface sediment deposits are susceptible to extreme events, such as tsunamis or other large overflows, which induce high shear stresses on the sediment bed. The specific properties of sediment beds subjected to such extreme loading...
The Experimental Advanced Airborne Research Lidar ‐ B (EAARL‐B), which was built and deployed by the U.S. Geological Survey (USGS) in 2014, is a novel topographic‐bathymetric lidar system. While retaining a number of features that were pioneered in the original National Aeronautics and Space Administration (NASA) EAARL system (e.g., low...
While riding bicycles has been promoted for its health, economic, and environmental benefits, it also complements other modes to complete a safe, efficient, and reliable transportation system. However, the dramatic increase of bicycle usage in the U.S. is accompanied by a growth of bicycle crashes. The U.S. Department of Transportation,...
Significant amounts of uncertainty owing to both modeling decisions and inherent randomness are present in simulating the material and geometric nonlinear response of structural systems to extreme loading. Computing the sensitivity of structural response with respect to model parameters indicates which parameters have the largest affect on the response, which...
Seamless, high-resolution topobathymetric digital elevation models (DEMs) of rivers are important for generating hydrodynamic models, studying water quality and related ecological issues, modeling flood vulnerability, and numerous other applications. However, such DEMs can be difficult to generate, due to a lack of topographic and bathymetric source data. Even where the...
Tsunami loading can cause sediment instability, which can compromise the structural integrity of coastal buildings and infrastructure. To understand the process by which a tsunami can cause sediment instability, it is necessary to understand how the pore water pressure in the soil changes during tsunami loading. Tsunami run-up causes the...
This dissertation studies the coupled fluid-structure interaction (FSI) of a wave energy converter (WEC) and evaluates the design of a WEC mooring system. The research is conducted in support of conceptual development, field test and performance evaluation of WECs as part of the mission of the Northwest National Marine Renewable...
Students in undergraduate engineering programs typically do not synthesize content learned from disparate course work until the end of their final terms of college. As an example, in undergraduate civil engineering programs, transportation engineering concepts (e.g., geometric alignment, asphalt design procedures) and geotechnical engineering concepts (e.g., shear strength of soils,...
To derive ellipsoid heights on passive marks with cm-level accuracy, many current specifications require the collection and adjustment of long-duration, static Global Navigation Satellite System (GNSS) sessions. To increase efficiency, a survey procedure that includes real-time kinematic vectors from a real-time GNSS network (RTN) was evaluated. Thirty different “hybrid” networks...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Optimization of reservoir operation is involves various competing objectives for a scarce resource (water). To find the optimal operation of reservoirs, it is essential to consider multiple objectives simultaneously. There are various sources of uncertainty associated with the reservoir operation problem that should be considered as well.
The overarching goal...
A significant number of historically existing wetlands that naturally stored rainwater and attenuated flood peaks have now been drained and employed as new farming areas. Beyond the water quality and flow problem, this has resulted in loss of natural habitats of diverse ecological species. Restoring wetlands have hence been proposed...
Real time networks (RTNs) have become popular for Global Navigation Satellite System (GNSS) surveys because highly accurate positions can be derived in seconds to minutes compared to hours as required with static sessions. To evaluate the accuracy of these shorter-duration, RTN GNSS observations and their potential for use as a...
The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
Student engagement in a course plays a vital role in a student’s ability to process and construct knowledge. Student engagement research has investigated how students engage in and out of the classroom on a macro scale, through observation and survey data collection of large student populations, which lack focus on...
Bridge inspections are vital for monitoring the health and serviceability of transportation infrastructure throughout the world. However, inspections can be logistically-challenging, expensive, and dangerous. For example, inspections may require climbing, as well as the use of scaffolding, ladders, rescue boats, bucket trucks, and/or under-bridge inspection vehicles. Small, multirotor unmanned aircraft...
Numerical models are effective tools for simulating complex physical processes such as hydrodynamic and water quality processes in aquatic systems. The accuracy of the model is dependent on multiple model parameters and variables that need to be calibrated and regularly updated to reproduce changing aquatic conditions accurately. Multi-sensor water temperature...
A wave-by-wave forecasting system is desired for optimization of wave energy conversion devices and for improving safety of vessel-based marine operations. This study outlines the first validation attempts of a recently developed forecasting system called Wavecast. The forecasting approach uses X-Band marine radar images for data assimilation, then reconstructs and...
Large numbers of reinforced concrete (RC) bridges were built in the past that are now considered seismically deficient. The structural members most likely to be considered deficient are the supporting columns. Typical deficient columns contain inadequate transverse reinforcement and poorly detailed lap splice lengths above the foundation. Insufficient lap splice...
Structurally efficient and cost-effective solutions are needed to extend the service-life of deficient and aging highway infrastructure around the world. One critical need is to increase the flexural strength of older reinforced concrete (RC) structures to carry heavier and more frequent loads. Titanium alloy bars (TiAB) offer a new opportunity...
In the residential sector, wood is the predominant construction material. In the commercial sector and in mid‐rise construction, the use of wood is limited because of a multitude of reasons, including building code restrictions, the perception of wood as a structural material, fire code requirements, and lack of knowledge and...
The Cascadia Subduction Zone has recently been identified as a source for an impending great earthquake. The potential of a large earthquake has created widespread interest into the resiliency of lifelines within the potentially affected areas. One critical lifeline is the electrical distribution and transmission systems which relies on legacy...
Improving safety education could contribute to the preparation of better professional engineers. Safety topics are not holistically embedded in transportation course curricula. This thesis explores the current state in which safety is being incorporated in transportation course curricula in terms of design and compares the uses of safety data in...
Over the past two decades, the Lean Construction academic and practicing engineering community has used lean practices and tools to help improve the performance of the Architecture, Engineering, and Construction (AEC) industry. Lean practices have led to improved competitiveness of construction companies that have adopted them, by focusing on ways...
Evaluation of teaching is used to examine and improve teaching quality in higher education. The literature consists of best teaching evaluation practices that have been developed, yet there is little research that has been conducted which investigates teaching evaluation practices in engineering programs. This thesis represents two manuscripts that explore...
Flexible pavements consist of multilayers, which form the pavement structures. Since the strength of the bond at interface between layers plays a significant role in improving the structural integri-ty and the performance of pavement structures, tack coat materials and methods used for their application during construction are important in providing...
CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...
In this thesis, the effectiveness of the 100 percent + XX percent seismic response directional combination rule available in codes and standards is evaluated using simulated nonlinear seismic response of two existing multi-story reinforced concrete plan-irregular buildings. The 5-story and 8-story buildings were designed according to the 1975 seismic codes...