Transportation agencies continuously strive to improve driving quality and highway safety, which are both highly correlated with the level of smoothness of the road. The International Roughness Index (IRI) is a widely adopted, standardized metric calculated from longitudinal profile data collected on the road. Inertial profilers are devices mounted to...
Coastal landslides and erosion are major natural hazards resulting in unstable slopes, constituting immense challenges to modern infrastructure. Developing, maintaining, and performing risk assessments of infrastructure on, or close to, these hazards require a detailed understanding of the geophysical processes destabilizing the slope. These efforts start with the collection of...
Microbial-induced corrosion of concrete (MICC) is a multi-stage deterioration process caused by microbial activity in wastewater infrastructure. MICC is a worldwide issue due to the reduced service life of the wastewater infrastructure and the economic impact associated with increased maintenance and reconstruction costs. This thesis explores two critical aspect of...
Civil engineers frequently use lime to improve the mechanical properties of weak clayey soils. The production of lime is associated with significant CO₂ emissions. Sequestering carbon dioxide into the stabilized soil can effectively reduce the carbon footprint of the lime. In the presence of CO₂, unreacted lime in the stabilized...
The Manual on Uniform Traffic Control Devices prohibits positioning a bike lane right-adjacent to a vehicle turn-only lane to mitigate the potential for right-hook crashes. However, it provides no specific guidance on positioning with respect to bus-only lanes. This thesis describes a before/after safety evaluation of bike lanes positioned left...
Most of the concrete in the world is produced using hydraulic cement (ordinary portland cement, OPC) and siliceous or alumino-siliceous supplementary cementitious materials (SCM). Due to the shift in focus toward environmental sustainability within the construction industry, alkali-activated cementitious systems (AAC) have gained significant attention to reduce the carbon footprint...
A curb ramp is an indispensable ramp system in the transportation network that provides a transition between a sidewalk and a roadway. The Americans with Disabilities Act (ADA) requires that the design, construction, and maintenance of curb ramps meet the ADA standards. However, many existing curb ramps are noncompliant, as...
Nearly 24% of Formerly Used Defense Sites (FUDS) containing military munitions are in the nearshore coastal zone with approximately 30% of those sites containing heterogeneous sediment compositions of gravel-sand. Previous exploration in munition mobility was performed on beaches of sandy or muddy bottoms leaving the influence of heterogeneous sediment properties...
This thesis focuses on the fundamental behavior of CLT floor-to-wall connections during a fire.
Cross-laminated timber (CLT) panelized structures rely on floor-to-wall connections for the load path and stability of the structure. Additionally, the fire performance of these connections is critical to prevent horizontal or vertical fire spread within these...
A vital aspect of concrete construction is quality assurance and control (QA/QC). Engineered structures must meet pre-determined and agreed-upon strength and durability requirements. Concrete falls into a specific category of infrastructure material because in most cases, these strength and durability requirements cannot be found until the material has at least...