Index Catalog // ScholarsArchive@OSU

Laboratory Observations of Tsunami-Driven Debris Damming with Comparison to ASCE 7-22 Minimum Design Loads

Creator:: Doyle, Kellen C.
Abstract:: Tsunami inundation of coastal communities can impose a wide array of forces on the built environment. Forces generated by tsunami-driven debris damming have the potential to cause failure of coastal structures and further accumulate flow-entrained debris. Since tsunami-resilient design standards were adopted by ASCE in 2016, debris damming considerations have...
Resource Type:: Masters Thesis
Full Text:: of Structural Engineering 1801 Alexander Bell Drive Reston, VA 20191-4400 Submitted

Advancing Spatial Data Engineering and Analysis: Integrative Approaches with GIS, Statistical Modelling, and Deep Learning

Creator:: Krivova, Maria
Abstract:: Geospatial data analysis is a multifaceted discipline encompassing the collection, processing, and visualization of diverse datasets. It models and delineates the interactions of people, objects, and phenomena within geographical spaces and predicts patterns based on the relationships between different locations. Despite significant advancements in geospatial data engineering and analytics over...
Resource Type:: Dissertation
Full Text:: /ofr20121007 Priest, G. R., and Allan, J. C., (2004), Evaluation of coastal erosion hazard zones along dune

Assessment and Service Life Prediction of Microbial Induced Corrosion of Concrete (MICC)

Creator:: Sahan, Feyza N.
Abstract:: Microbial-induced corrosion of concrete (MICC) is a multi-stage deterioration process caused by microbial activity in wastewater infrastructure. MICC is a worldwide issue due to the reduced service life of the wastewater infrastructure and the economic impact associated with increased maintenance and reconstruction costs. This thesis explores two critical aspect of...
Resource Type:: Masters Thesis
Full Text:: limestone cement (PLC) [33, 34]. Alexander and Fourie [28] and Herrison et al. [29, 35] compared ordinary

Impact of Bicycle Rolling Stop Laws on Safety-Relevant Behaviors in the Pacific Northwest

Creator:: Woodside, Jasmin Barnes
Abstract:: Previous research has found some bicyclists disregard circular red indications and stop signs. Possible justifications include a desire to increase safety, save energy, save time, and increase visibility. Because of this, many bicyclists feel as though stopping at stop signs, especially in the absence of conflicting vehicular traffic, is an...
Resource Type:: Masters Thesis

Understanding the Similarities and Differences Between Academia and the Engineering Workplace through Barriers to Adoption, Epistemic Beliefs, and Problem-Solving Behavior

Creator:: Gestson, Sean Lyle
Abstract:: Engineering education research has led to a greater understanding of the gap in preparedness of students for the engineering industry. Multiple studies comparing the workplace and academic contexts and the participants in those contexts (i.e., students, faculty, and engineering practitioners) have emphasized similarities and differences between the two contexts by...
Resource Type:: Dissertation
Full Text:: ; Kohl and Finkelstein 2008; Jarodzka et al. 2010; Rosengrant, Thomson, and Mzoughi 2009; R. B. Kozma

Experimental Testing of Glue-Laminated Beam-to-Column Connections

Creator:: Madland, Haley
Abstract:: The behavior of mass timber beam-to-column connections under seismic loading is not yet well understood. Mass timber beam-to-column connections must have the ability to maintain load-carrying capacity despite the deformations that will be imposed on all components of the building during seismic events. This behavior is called deformation compatibility. The...
Resource Type:: Masters Thesis
Full Text:: Journal of Structural Engineering 1801 Alexander Bell Drive Reston, VA 20191-4400 Submitted for

Region-Specific Investigation of the Cone Penetration Test for Preliminary Classification and Estimation of Preconsolidation Stress, Undrained Shear Strength, and Cyclic Resistance of Transitional Silts

Creator:: Ortiz, Susan Christine
Abstract:: The Cone Penetration Test (CPT) has been widely-adopted for rapid, cost-effective exploration of the subsurface and reduction in the effort associated with drilling, sampling, and laboratory testing of soil. The adoption of the CPT has stemmed in part to the correlation of measurements to preliminary soil classification, stress history, drained...
Resource Type:: Masters Thesis

Remote Sensing Tools for Evaluating Climate Change Impacts in Coastal Environments

Creator:: Herrmann, Joan F.
Abstract:: Climate change has pervasive impacts on Earth’s diverse ecosystems. Observed and projected effects that impact coastal environments pose unique challenges. Coastal regions provide numerous ecosystem services (e.g., fisheries, nursery habitats, erosion control, and water filtering and detoxification), house 40% of the US population, and contribute to 58% of the national...
Resource Type:: Masters Thesis

Cross-Laminated Timber-Concrete Composite Floor Systems for Tall Building Design

Creator:: Morrell, Ian
Abstract:: With growing interest in mass timber, especially mass timber panels (MTP), there has been a need to better understand their structural properties. One of the most versatile uses for MTP are as floor systems. Under new code provisions, these floors can be utilized in new and taller building types, but...
Resource Type:: Dissertation
Full Text:: . Christopher Higgins, Arijit Sinha, and Andre R. Barbosa contributed to all portions of the three manuscripts

Comparison and Validation of Hydrodynamic Theories for Wave Energy Converter Modelling

Creator:: Leary, Matthew M.
Abstract:: A wide variety of hydrodynamic theories are utilized to approximate a Wave Energy Converter’s (WEC) equation of motion. Numerous theories have been refined in order to improve numerical approximations of WEC dynamics. When incorporating refined hydrodynamic theories into numerical models, there are distinct impacts on WEC rigid body motions, cable...
Resource Type:: Masters Thesis
Full Text:: specified node positions (Walton & Polachek, 1960; Reid, 1968; Hicks & Clark, 1972; Hall & Goupee, 2015

ScholarsArchive@OSU

Laboratory Observations of Tsunami-Driven Debris Damming with Comparison to ASCE 7-22 Minimum Design Loads

Advancing Spatial Data Engineering and Analysis: Integrative Approaches with GIS, Statistical Modelling, and Deep Learning

Assessment and Service Life Prediction of Microbial Induced Corrosion of Concrete (MICC)

Impact of Bicycle Rolling Stop Laws on Safety-Relevant Behaviors in the Pacific Northwest

Understanding the Similarities and Differences Between Academia and the Engineering Workplace through Barriers to Adoption, Epistemic Beliefs, and Problem-Solving Behavior

Experimental Testing of Glue-Laminated Beam-to-Column Connections

Region-Specific Investigation of the Cone Penetration Test for Preliminary Classification and Estimation of Preconsolidation Stress, Undrained Shear Strength, and Cyclic Resistance of Transitional Silts

Remote Sensing Tools for Evaluating Climate Change Impacts in Coastal Environments

Cross-Laminated Timber-Concrete Composite Floor Systems for Tall Building Design

Comparison and Validation of Hydrodynamic Theories for Wave Energy Converter Modelling

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search