Index Catalog // ScholarsArchive@OSU

An evaluation of dust abatement materials used in Region 6

Creator:: Langdon, Brian B.
Resource Type:: Masters Thesis
Full Text:: performance related 1.3 Scope This report identifies the products and procedures currently used in Region 6

The Design of a Roof Truss for the Proposed Drill Shed at the Oregon Agricultural College

Creator:: Thompson, Ralph Infield
Abstract:: By an appropriation of the Oregon Legislature of it becomes possible for the Oregon Agricultural College to build a drill shed, a thing long needed by this institution. Dennis, Hendricks and Tobey, architects of Portland, submitted plans for this drill shed and in designing the truss for this building we...
Resource Type:: Undergraduate Thesis
Full Text:: 4 in. x 6 in. x 7/8 in. with their short legs riveted together. The lower chord is 2 Ls 5 in. x

Plans and Specifications for a Sewerage System for all of Corvallis Lying West of Ninth Street

Creator:: Gardner, Wilford W.
Abstract:: At the present time only a portion of Corvallis is sewered and a portion of the city still employs the most crude and unhealthful methods of disposal. The district east of Ninth Street, as shown on the map, has an effective system of well constructed sewers, of the combined storm-water...
Resource Type:: Undergraduate Thesis
Full Text:: cost is no greater than a brick sewer. The thickness of the sewer was taken at six inches. This is

GOSEP: Georeferenced Oregon Soil Engineering Properties

Creator:: Dutille, Victoria L.
Abstract:: Geotechnical engineers design and analyze the interface between the natural and built environments, often based on uncertain and inherently variable data due to the nature of the building material, soil. Engineers must estimate the subsurface conditions at a site using historical, in-situ, and laboratory testing data. However, only discrete representative...
Resource Type:: Capstone Project
Full Text:: release of my report to any reader upon request. Victoria Dutille, Author 4

Data assessment in Oregon for SafetyAnalyst based on Highway Safety Manual Part B

Creator:: Li, Meng
Abstract:: The author of the Highway Safety Manual (HSM) Part B developed a predictive method for safety management. A software tool for highway safety system analysis called the SafetyAnalyst is developed basing on HSM Part B. The author describes an effort to evaluate the feasibility of SafetyAnalyst in Oregon. Seven sample...
Resource Type:: Masters Thesis
Full Text:: Safety Evaluation of Curve Warning Speed Signs – Interim Report

Large scale model testing of the FMC submerged wave attenuation device

Creator:: Huber, David S.
Abstract:: This report describes the hydrodynamic testing and evaluation of a one-tenth scale model of the FMC Wave Attenuation Device. The purpose of the test was to quantify the wave attenuation characteristics and structural loading induced by a test program of monochromatic incident waves on the submerged structure. The device was...
Resource Type:: Masters Thesis
Full Text:: : Redacted for privacy Charles K. Sol itt This report describes the hydrodynamic testing and evaluation of

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

Creator:: Pelphrey, Jordan Michael
Abstract:: The LRFR Manual, within commentary Article C6.4.4.2.3, contains provisions for development of site-specific live load factors. In Oregon, truck Weigh-in-Motion (WIM) data were used to develop live load factors for use on state-owned bridges. The factors were calibrated using the same statistical methods that were used in the original development...
Resource Type:: Masters Thesis
Full Text:: rating is given in Equation 39 of NCHRP Report 454, as: WT 72 [1]240 W where W is the gross weight of

In-plane Creep Behavior of Cross-laminated Timber and Mass Plywood Panels: A Methodology to Evaluate the Long-term Performance of Post-Tensioned Mass Timber Walls

Creator:: Longman, Ryan P.
Abstract:: Post-tensioned (PT) self-centering shear walls were designed to reduce structural damage from seismic activity. However, these lateral force resistant systems experience post-tension loss negatively affecting the re-centering capability due to delayed deformations experienced by engineered wood products over time. The long-term mechanical response of mass-timber panels to in-plane PT loads...
Resource Type:: Masters Thesis
Full Text:: approach. Since there was no accurate, as-built BIM available, the BIM of PT CLT shear walls was

Requirements for successful irrigation systems in the Senegal River Basin (Mauritania)

Creator:: Abba, Fatima Zahra
Abstract:: Implementation of a small-scale irrigation project in southern Mauritania is analyzed in this report. The main objective is to demonstrate that small-scale irrigation farming is the best suited solution for Mauritania's agriculture. To reach this objective different steps are taken in this study. The first step highlights the different aspects...
Resource Type:: Masters Thesis
Full Text:: Maximum Minimum Average May 31.1 1. 6 8. 6 June 223 2. 5 72 July 1, 358 184 495 Aug 3,',569 748 2, 047

Behavior of gypsum-sheathed cold-formed steel wall stud panels

Creator:: Lee, Young-ki
Abstract:: This study consists of three parts: 1) Part A: Limiting Height Evaluation for Composite Wall Tests, 2) Part B: Mid-Span Deflection Evaluation for Composite Wall Tests, and 3) Part C: Nominal Axial Strength Evaluation for Wall-Braced Wall Stud Columns. The purpose of Part A is to develop experimentally-based limiting heights...
Resource Type:: Dissertation
Full Text:: theoretical predictions (and the results are shown in Fig.6 in the report (McCutcheon 1986)). 2.4 Analysis

ScholarsArchive@OSU

An evaluation of dust abatement materials used in Region 6

The Design of a Roof Truss for the Proposed Drill Shed at the Oregon Agricultural College

Plans and Specifications for a Sewerage System for all of Corvallis Lying West of Ninth Street

GOSEP: Georeferenced Oregon Soil Engineering Properties

Data assessment in Oregon for SafetyAnalyst based on Highway Safety Manual Part B

Large scale model testing of the FMC submerged wave attenuation device

An investigation of Oregon weight-in-motion data for bridge rating implementation and evaluation

In-plane Creep Behavior of Cross-laminated Timber and Mass Plywood Panels: A Methodology to Evaluate the Long-term Performance of Post-Tensioned Mass Timber Walls

Requirements for successful irrigation systems in the Senegal River Basin (Mauritania)

Behavior of gypsum-sheathed cold-formed steel wall stud panels

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Funding Body

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search