Index Catalog // ScholarsArchive@OSU

The effect of high temperatures on structural timbers

Creator:: Ebeling, Dick Winfield
Resource Type:: Masters Thesis
Full Text:: Fig. 3 Testing mechine used for small sanrnles. . . . . 19 Fig. 4 Microscoric structure of wood (14

Load characteristics of end-matched tongue and grooved timber decking

Creator:: Anvick, Theodore Emerson
Resource Type:: Masters Thesis
Full Text:: ''JJu'JAa'JJ. ..*.*..... ..I.*.SI. - . . . .e Construction of Test 3peciraens Testing .qutpcent Testing

The degradation of kraft pulping wastes in estuarine waters

Creator:: O'Neal, Gary Lewis, 1938-
Abstract:: The degradation of kraft pulping wastes in estuarine waters was measured in terms of the following parameters: five-day 20°C B.O.D., the Pearl-Benson Index, and toxicity to the bay mussel (Mytilus edulis L.). The waste tested was the total effluent from a combined pulp and paper mill producing 430 tons of...
Resource Type:: Dissertation
Full Text:: produced by industries based upon the utilization of wood. As a re- sult of these activities, it has

Performance Based Tests on Cross Laminated Timber - Concrete Composite Floor Panels

Creator:: Blank, Curtis
Abstract:: This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Resource Type:: Masters Thesis
Full Text:: were obtained from testing results. Lastly, the floor panels were tested to failure under weak- axis

The application of granular activated carbon to the treatment of kraft evaporator condensate wastes

Creator:: Hansen, Sigurd Paul
Resource Type:: Masters Thesis
Full Text:: hours, depending upon the type of wood and the product to be produced. At the end of the cooking period

Foam separation of organic and toxic materials in kraft mill effluents

Creator:: Blazier, James Lewis
Abstract:: Because of the organic nature and the natural foaming characteristics of kraft mill effluents, it was decided to investigate the feasibility of using foam separation as a method of treatment. The treatment efficiency was evaluated by BOD and COD reductions as well as the decrease in toxicity to marine life....
Resource Type:: Masters Thesis
Full Text:: wood and rnanufacturing of the finished product. The pulping process produces the largest volufire and

Effect of vertical compressive stress on shear strength of wood beams

Creator:: Mandery, William Lee
Resource Type:: Dissertation
Full Text:: testing fixtures and four different pieces of wood. Statistical methods (5) were used for comparing the

Behavior of Cross-Laminated Timber Diaphragm Panel-to-Panel Connections with Self-Tapping Screws

Creator:: Sullivan, Kyle
Abstract:: The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Resource Type:: Masters Thesis
Full Text:: hold-down connection testing. Thus, early testing on this new engineered wood product paved the way

Performance of wood frame wall with thin shell ECC shear panel

Creator:: Lewis, Michael C.
Abstract:: The overall goal of this study was to evaluate an alternative to traditional wood framed shear wall construction. This study introduced the innovative idea of using a water and seismic damage resistant, wood-concrete- composite (WCC) construction instead of an all-wood design. The WCC design consisted of a thin shell of...
Resource Type:: Masters Thesis
Full Text:: as the standard for cyclic wood frame wall testing. Uang and Gatto (2003) used the CUREE

Chemical transformation of rice husk ash for sustainable, constructable, and durable binary cementitious system

Creator:: Prasittisopin, Lapyote
Abstract:: The production of cement and concrete results in the production of large amounts of CO₂ emissions which can have significant negative environmental impacts. Using supplementary cementing materials (SCMs) as a cement replacement is an effective solution to reduce these negative environmental impacts, as most SCMs are waste by-products from other...
Resource Type:: Dissertation
Full Text:: such by-product material. RHA is produced from the burning of rice husks for the production of

ScholarsArchive@OSU

The effect of high temperatures on structural timbers

Load characteristics of end-matched tongue and grooved timber decking

The degradation of kraft pulping wastes in estuarine waters

Performance Based Tests on Cross Laminated Timber - Concrete Composite Floor Panels

The application of granular activated carbon to the treatment of kraft evaporator condensate wastes

Foam separation of organic and toxic materials in kraft mill effluents

Effect of vertical compressive stress on shear strength of wood beams

Behavior of Cross-Laminated Timber Diaphragm Panel-to-Panel Connections with Self-Tapping Screws

Performance of wood frame wall with thin shell ECC shear panel

Chemical transformation of rice husk ash for sustainable, constructable, and durable binary cementitious system

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search