Index Catalog // ScholarsArchive@OSU

Transformers

Creator:: Sutton, William Dantzler and Beaty, Jesse James
Abstract:: The financial success or failure of a lighting or power enterprise is measured by the efficiency of the machinery, and the efficiency of the machinery depends upon that of each piece of apparatus of which it is composed. In alternating current distribution the transformers are frequently scattered in large numbers...
Resource Type:: Undergraduate Thesis

Theory and Construction of an Induction Motor

Creator:: Chapin, Norris Everard and Christiansen, Clarence Lewis
Abstract:: In order that the proper motor for a given service may be chosen it becomes necessary to study and know the requirements and characteristics of the machine which may be used for that purpose. When these are known the selection of that one which is best adapted for the use...
Resource Type:: Undergraduate Thesis

Theory and Construction of a Rotary Converter

Creator:: Hinrichs, Max A., Spicer, Roger, and Witzig, Alva Asa
Abstract:: See thesis for abstract.
Resource Type:: Undergraduate Thesis

The theory, design, and construction of a 5 k.w., 125 volt, compounded, direct current generator

Creator:: Wiggen, Eugene Cyrus and Baker, Walter Rawalt
Abstract:: It has been a standing problem among the scientists of the past and will perhaps be puzzled-over for many centuries to come; namely the most efficient method of transmitting power from one point to another. The nearest solution at present, and a very satisfactory one, is electricity. By means of...
Resource Type:: Undergraduate Thesis

The Theory and Operation of the Synchronous Motor

Creator:: Groth, Bernard John and Cross, George Albert
Abstract:: The study, design, construction, operation and care or synchronous machines forms one of the most important branches of electrical engineering. The extent to which they are now being used is a notable feature of recent electric progress. The term synchronous machines covers quite a field and it might be well...
Resource Type:: Undergraduate Thesis

The Testing of an Alternator

Creator:: Fleser, Russell Harrison and Billings, Everett Monroe
Abstract:: "Before a company which manufactures electrical machines allow them to leave the factory, each must undergo certain tests to make sure that there are no faults of design or workmanship and also ofttimes that they meet the specifications of the buyer. Four important tests are made, e.g. (1) no load...
Resource Type:: Undergraduate Thesis

The Test of an Induction Motor Generator Set

Creator:: Plankinton, John C. and Gianella, Vincent Paul
Abstract:: This thesis comprises a series of tests run on a compound direct current generator and an induction motor; separately and combined as a set, with sheets of data; characteristic and efficiency curves and deduction drawn therefrom relative to the two machines.
Resource Type:: Undergraduate Thesis

The Load Characteristics of the Lebanon Power Plant

Creator:: Belknap, John Harrison, Morris, George Willis, and Jeppesen, Anders Marinus
Abstract:: The purpose of this thesis is the determination of the load characteristics of the Steam-Hyciro-Electric Plant owned and operated by the Lebanon Electric Power and Water Co. This corporation furnishes electrical energy for power and lighting service and also the water supply to the city of Lebanon, Oregon.
Resource Type:: Undergraduate Thesis

The Induction Motor and Performance Test

Creator:: Buchanan, Elmer Clarence and Smith, Arthur Byron
Abstract:: The following discussion is confined mostly to that type of machine in which the squirrel care revolving secondary it used. In its most primitive form it con - listed simply of a disk- aramature as described by Baily in 1870 and due to Tesla (1888), of the fact that two,...
Resource Type:: Undergraduate Thesis

The Induction Motor

Creator:: Taber, Howard Weston and Spires, Fred Lloyd
Abstract:: The problem of the economical transmission of power has long been a serious one to the engineer. Formerly the power had to be generated on or near the spot where it was to be used, but now the advance that has been made in Electrical Engineering has largely done away...
Resource Type:: Undergraduate Thesis

The Fixation of Atmospheric Nitrogen

Creator:: Fairchild, Jackson Kenelem
Abstract:: Much has been accomplished in the last few years toward the conservation of natural resources, and in this work the engineer has taken a leading part. The prevention of unnecessary waste, the utilization of hitherto useless by-products, and the economic production of the world's necessities are important features of this...
Resource Type:: Undergraduate Thesis

The Electrical Equipment of an Ocean-Going Vessel

Creator:: Groves, Del Roy and Barnett, Arthur Rex
Abstract:: The rapid advancement of electrical science has led it to invade the field of marine engineering. On ship-board, all ship's lights, search lights and signal lights are entirely electric. Of power appliances outside of uses on men of war,ship's ventilation is completely electric; electric deck winches and boat cranes are...
Resource Type:: Undergraduate Thesis

The effect of alternating current on the resistance and reactance of iron and steel wires

Creator:: Eckley, Winfield
Abstract:: During the past year the rapid increase in the cost of copper and aluminum has led operating companies to investigate the feasibility of using iron and steel conductors for transmission and distribution purposes where small blocks of power are to be served. This Thesis gives the results of tests on...
Resource Type:: Undergraduate Thesis

The Economy and Advisability of Operating a Combined Power and Exhaust Heating Plant at the Oregon Agricultural College

Creator:: Cohen, Lesser Raphael Solis and Read, Lance
Abstract:: The question of whether to purchase power or to maintain an isolated plant is one which frequently confronts the engineer, and the problem is by no means easy of solution, as there are a number of factors which vary with individual cases and determine the economy and desirability of the...
Resource Type:: Undergraduate Thesis

The Design, Construction, and Testing of a Revolving Field, Three Phase Alternator

Creator:: Brown, Sherman Asher and Thayer, Edward Sprague
Abstract:: By way of preface, a few words may be said regarding the advantages of the revolving field type of machine. The first in its favor and the chief reason for its existence, is that by passing the heavy armature current through permanent stationary contacts and only the small field current...
Resource Type:: Undergraduate Thesis

The Design of Hydro-Electric Power Station and Distribution System

Creator:: Powell, Joel William and Booth, Latimer Hobart
Abstract:: The marked movement of utilizing Oregon's water power in the service of generating electric current, has been promoted by the economics in transmission of electricity to distances both great and small; by the harnessing of industrial implements to electric power; and by the advancement and extension of interurban railways. It...
Resource Type:: Undergraduate Thesis

The Design of an Induction Motor, Single Phase Double Current Generator Set

Creator:: Stutz, Lester Eugene and Pernot, Fred Eugene
Abstract:: Throughout the year the regular design work of the class room proved so profitable that it was thought that there was no subject which could be selected for thesis purposes of greater benefit,or which offered as great a latitude in the working out of the various problems, than the one...
Resource Type:: Undergraduate Thesis

The Design of an Hydro-Electric Power System

Creator:: Wall, Rupert and Sleight, Thomas Roy
Abstract:: A feasible development for a Hydro-Electric power plant can be found in the Mary's River. About 9 miles west of Corvallis, the north fork of the stream affords an excellent situation for a dam site. The canon of the north fork at this point is very narrow, and having good...
Resource Type:: Undergraduate Thesis

The Design of an Electric-Driven Saw Mill

Creator:: Autzen, Thomas and Smith, N. T.
Abstract:: The electric motor has for an number of years occupied an important position in the operation of wood-working machinery, of moderate capacity, for example the planing mills, sash and door factories and many of the other similar wood working shops. However its adoption in the more trying field of saw...
Resource Type:: Undergraduate Thesis

The design of a 1000 k.w. hydro electric power plant

Creator:: McNeill, Ralph Waldo and Stebinger, Carl Marion
Abstract:: One of the most important and likewise practical problems that oonfront the Electrioal Engineers of the present daysis the design and the construotion of Hydro Electrio Power plants for the generating of electrioal energy,both for power and li;hting purposes. In order that we might become better acquainted with the facts...
Resource Type:: Undergraduate Thesis

ScholarsArchive@OSU

Transformers

Theory and Construction of an Induction Motor

Theory and Construction of a Rotary Converter

The theory, design, and construction of a 5 k.w., 125 volt, compounded, direct current generator

The Theory and Operation of the Synchronous Motor

The Testing of an Alternator

The Test of an Induction Motor Generator Set

The Load Characteristics of the Lebanon Power Plant

The Induction Motor and Performance Test

The Induction Motor

The Fixation of Atmospheric Nitrogen

The Electrical Equipment of an Ocean-Going Vessel

The effect of alternating current on the resistance and reactance of iron and steel wires

The Economy and Advisability of Operating a Combined Power and Exhaust Heating Plant at the Oregon Agricultural College

The Design, Construction, and Testing of a Revolving Field, Three Phase Alternator

The Design of Hydro-Electric Power Station and Distribution System

The Design of an Induction Motor, Single Phase Double Current Generator Set

The Design of an Hydro-Electric Power System

The Design of an Electric-Driven Saw Mill

The design of a 1000 k.w. hydro electric power plant

Limit your search

Academic Affiliation

Advisor

Commencement Year

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search