The purpose of this research is to develop methods to
translate a certain machine independent intermediate
language (IML) to efficient horizontal microprograms for a
class of microprogrammable machines. This IML has been
developed by Malik (12) and is compiled directly from a
high level microprogramming language used to implement a...
This paper investigates the benefit of various parallel processing
architectures for a Command and Control system for the Royal
Thai Air Force. Parallel processing has been shown to be useful
for air defense and air traffic control applications. Its advantages
are examined within the constraint imposed by the available
resources...
Most technological problems associated with man-machine conversations
have been solved and are well documented in both the
contemporary technical and lay literature. The major remaining
technological problem is the real time conversion of a human's vocal
uterances into a "written" phoneme sequence representing the information
content of speech. The work...
It is popular belief that the volatility of the exchange rate is due
to the balance of payments, which in turn is mainly influenced by the
balance of trade. A closed-loop dynamic economic model is proposed
to describe and analyse the effect of the international trade of a
country on...
A liquid crystal thermographic technique was developed
for application to several problems in clinical
medicine and physiology. The procedure was inexpensive,
rapid, simple, versatile and acceptable to patients.
Investigators in the past have used cholesteric liquid
crystals for thermography but their use was limited to
research in the medical field...
A non-volatile electrically alterable read-only memory using
an MOS field effect transistor with a threshold voltage which depended
upon the position of ionic charges for its memory was fabricated.
The conventional silicon dioxide layer was replaced by a composite
layer consisting of thermal silicon dioxide, electron beam
evaporated aluminum oxide,...
The feasibility of using the Franz-Keldysh effect in practical
light intensity controlling devices was investigated.
Reverse-biased diodes made from CdS were implemented to obtain
high electric fields necessary for the effect. The three types of
diodes studies were: MIS, metal-semiconductor barrier, and p⁺-n
heterojunction. An expression for the change in...
This report is concerned with the analysis of the effect of
finite wordlength, channel capacity and source rate in digital feedback
control of linear systems. The cases considered are (1) finite
wordlength A/D conversion, no feedback delay, ideal ROM (read
only memory) controller; (2) finite A/D wordlength (source rate),
state...
The dynamics of land use in the State of Oregon are simulated
on a digital computer. The introductory chapter outlines the complex
nature of the problems facing the post-industrial society and argues
that the scientific and professional estates share in the responsibility
for public policy formulation. The second chapter .presents...
A simulation method using a hybrid computer is developed in
this dissertation to enhance the study of wind-driven ocean circulation.
The simulation is based on the mathematical model developed by
Ekman. Pure digital simulation is not economical due to excessive
computer time required for the solution of the partial differential...
It has been established that bilinear models
occur frequently in nature and offer some important
advantages from the standpoint. of controllability,
optimization and modeling. The estimation of
bilinear systeim models from the Measurements
of input-output data are discussed. In the
first approach a parametric model of a discrete-time
linear system...
The question of the suitability of Walsh functions or
similar bi-valued functions used as a radar electromagnetic
carrier waveform is considered. Walsh functions are
described and effective sinusoidal steady state transfer
functions are defined for transmission elements, antenna
systems, and propagation media.
The argument is made that the unit impulse...
Bilinear systems, encountered in many important applications of engineering, biological and socio-economic systems, represent the logical step in complexity between the linear systems which are inadequate in the modeling of various dynamic processes and the difficult realm of nonlinear systems. This dissertation studies two functional expansions in bilinear system analysis-...
This fault detection scheme is based on sampling the instantaneous
phase voltages and checking their sum and magnitude against
a specified voltage. Faults on the system cause unbalances and
distortion of the phase voltages and currents. The currents and
voltages change in magnitude and/or phase position with respect to
the...
The effect of the mutual inductances between the rotor coils of a synchronous machine on its defined reactances and predicted transients are investigated. Two linearized models of the machine are considered. One uses the Laplace-Transform approach, with minimum number of assumptions on the inter-coil couplings, in developing a model for...
A new modular loop architecture for distributed computer
systems has been developed and compared with three of the most
prominent loop architectures currently being used. The competitive
loops with which the new architecture has been compared
are the Newhall loop, the Pierce loop and the DLCN loop. The four
loop...
Bilinear systems due to their variable structure properties
offer more versatility in modelling of nonlinear processes than
linear systems.
The state estimation problem for a continuous bilinear system
with a continuous observation model is studied and the results are
extended to the case where the observations are of a discrete...
In this dissertation, a new computational method for equality constrained nonlinear programming is developed. Specifically, problems of minimizing a nonlinear objective function f(x) subject to constraints h(x) = 0, where f is a scalar valued, x is an n-vector and h is a m-vector with m < n is considered....
An advanced forward 'area tactical radar network, now under
conceptual development by the Air Force Electronic Systems Division,
can be viewed as a novel form of computer network but with
other unique problems resulting from the specialized nature of the
application. The proposed network will link together a number of...
The purpose of this research is to design a high level language
(HLL) suitable for microprogramming. A top down design technique has
been adopted which makes the language design process simple and
accurate.
The primitive operations of a high level language for producing
emulators is shown to include special purpose...
With the advent of LSI, iterative forms of realization
of digital systems are becoming increasingly popular with
system designers. Many problems occurring in digital computer
design render themselves suitable for iterative
realization. These include adders, arithmetic logic units,
coding and decoding circuits and so on. Fault-free functioning
of such systems...
A simple approach to developing approximate analytical
performance models for complex systems (such as distributed
processing systems or computer networks) is presented.
The approach is applicable in cases where measurement
or simulation data describing system performance are
available but the system is too complex for exact analytical
models to be...
The suitability of discrete least-squares optimal (Wiener) filters
for deconvolution of tone-burst waveforms is studied. It is shown
that: (1) such waveforms are not well suited to these filters without
preprocessing, (2) the use of exponential weighting results in a significant
improvement in filter performance and (3) that "phase-unwrapping"
in...
An application of the theory of conditionally Gaussian random
processes to filtering and stochastic control problems is presented
here. The results due to Liptser and Shiryayev are proved to hold
in the multidimensional case under somewhat relaxed conditions,
when compared to the original ones. Such a generalization is required
from...
Regular structures such as PLA's are very
important to reduce VLSI design time. Interest in CAD
tools such as a practical reducing PLA generator is high.
This dissertation presents PRONTO as a practical, near-optimal
product term reduction method, whose general
heuristic approach consists of the following four steps.
First, select...
The electrical and optical properties of semi-insulating, epitaxial and ion-implanted GaAs and InP have been characterized and analyzed. Electron and hole traps in semi-insulating GaAs and InP, with activation energies ΔE[subscript T] ranging from 0.16 ± 0.01 to 0.98 ± 0.01 eV, have been detected and characterized by Photo-Induced Current...
A new approximation technique to a certain class of nonlinear
filtering problems is considered in this dissertation. The method is
based on an approximation of nonlinear, partially-observable systems
by a stochastic control problem with fully observable state. The
filter development proceeds from the assumption that the
unobservables are conditionally Gaussian...
Accurate and efficient computational methods to evaluate the
quasi-TEM parameters of various planar structures such as microstrips,
coplanar lines and coplanar waveguides are developed. The characteristic
parameters of all these structures which are used extensively
in microwave integrated circuits for applications as transmission
lines and other circuit elements are computed...
The problem of optimization of stochastic dynamic systems with
random coefficients is discussed. Systems with both Wiener processes and uncertain random-process disturbances are dealt with in
this dissertation, and these include certain bilinear stochastic
systems. It is the purpose of this thesis to study the optimal control and, to some...
The major goal of this research work was to develop better
electrical measurements for the evaluation of silicon material
quality.
The first approach investigated was the Zerbst generation
lifetime measurement technique. It was demonstrated that the
error in the estimation of the generation lifetime obtained with
this technique could be...
As a result of the automation revolution, robots
are assuming ever more complex and demanding tasks.
Robot system control schemes for fast and precise robot
motion require utilization of the entirety of the robot
dynamic formulations and the ability to evaluate these
formulations in real-time. The dynamic formulations,
which take...
In this research, a novel shunt compensation scheme
design procedure is developed for unbalanced, untransposed
n-phase transmission lines. The main function of the
scheme is to reduce the effect of the capacitive coupling
on untransposed transmission lines to levels where successful
single-pole switching is assured. The analysis procedure
is carried...
A highly flexible numerical simulation model for the performance
prediction of brushless dc drives is presented, which is capable of
investigating unbalanced and asymmetrical operating conditions as well
as drives with non-ideal parameters. Numerical speed-up procedures
allow for the investigation of pulse-width modulated (PWM) drives using
a personal computer. Experimental...
Ever-increasing size, complexity and operation costs in modern
power systems have stimulated the intensive study of an optimal
Load Shedding and Generator Rescheduling (LSGR) strategy in the
sense of a secure and economic system operation.
The conventional approach to LSGR has been based on the application of LP (Linear Programming)...
Team pursuit-evasion games are studied here with one performance
index for the team as a unit in competition with one common opponent.
Particular structures of team games are discussed after a brief introduction
of the two-player differential games. The classical calculus
of variations is used to derive the feedback strategies...
Local computer networks are being installed in diverse application areas. Many of the networks employ a distributed control scheme, which has advantages in performance and reliability over a centralized one. However, distribution of control increases the difficulty in locating faulty hardware elements. Consequently, advantages may not be fully realized unless...
The electrical properties of ion-implanted GaAs FET channels
are investigated by two methods. First, the channel current (I) as
a function of voltage (V) is examined at different temperatures and
using different voltage ramp rates. The standard FET I-V curve,
which can be observed on a commercial curve tracer, is...
A design style is presented for a self-synchronized,
multiple input change, asynchronous state machine which
processes input changes at a speed limited only by the
required machine behavior and implementation technology.
This state machine will operate at this ultimate speed
because of a new asynchronous delay element with unequal
rising...
We extend previous results for optimally scheduling
concurrent program modules, called tasks, on a fixed, finite number
of parallel processors in two fundamental ways: (1) we introduce a
new heuristic which considers the time delay imposed by message
transmission among concurrently running tasks; and (2) we
introduce a second heuristic...
Two new medium access protocols for ring type local area networks,
CTR (Concurrent Token Ring) protocol and DRUID (Destination Removal
withoUt Intermediate node Delay) ring protocol, are proposed, designed and
analyzed. A destination partial removal technique is designed and used in
these two protocols to support concurrent message transmission and...
Control algorithms for accurate and fast moving robots require the use of the complete dynamic model of the robot. The complete dynamic model takes into account the nonlinearity and coupling terms of the whole structure. The time of computing the dynamic equations determines whether they are usable in practical applications....