The purpose of this thesis is to investigate the necessity of
transposition in the construction of overhead transmission lines.
Line currents, line voltages and line losses of both the transposed
and untransposed lines were calculated and compared for two different
voltage classes. The conventional method of symmetrical components
was used...
The feasibility of utilizing acoustic imaging techniques for
improving the undersea viewing capability of small submersibles is
investigated. The limiting values of major parameters in acoustic
imaging systems are established and graphs which illustrate the
parametric relationships are presented. A series of sample calculations
illustrate how the graphs can be...
This thesis develops a simplified and logical simulation model
for an amplidyne excitation system for a synchronous generator with
an automatic voltage regulator.
The non-transfer function representation using field determined
parameters including variable inductance and machine saturation
was used to reduce the computing time for the stability analysis.
The simulation...
The power spectral density of the acoustic signature of
Dungeness crab was calculated by the use of digital computer.
The signal produced by the Dungeness crab was an analog signal.
Therefore a conversion of the signal from analog to digital was
necessary. This was done by sampling the acoustic signature...
A new, computer oriented system for automatic, in situ
monitoring of water quality is proposed which makes full and effective
use of modern computer technology. The main objective of this thesis
work was the development of the concept for in situ computer controlled
experimenting as a reasonable and effective means...
The purpose of this study is to investigate radiation
losses in microstrip circuits. Expressions are derived to
evaluate the radiation resistances (or conductances) for
single terminated, open and short-circuited lines. The
quality factor Q of open and short-circuited stubs is
evaluated. An analytical procedure is formulated to
evaluate the radiation...
CP1100/GPIB Interface is an interface between the "General
Purpose Interface Bus", which is an implementation of the Universal
Bus described in IEEE Standard 488-1975, and Unibus. This interface
enables TEKTRONIX CP1100 series controllers to operate
GPIB- compatible instruments connected to the General Purpose
Interface Bus. The designer can now incorporate...
REGTRAN (REGister TRANsfer), a hardware description
language and SYSSIM (SYStems SIMulation), a simulator for the
system described by REGTRAN were originally developed by Edward
Pett, Jr [33] at the University of Texas at Austin. These two programs
are successfully used to simulate many digital systems of
complex nature. It is...
An important step in the design of digital networks lies in the derivation of the switching formulas which describe the combinational logic networks in the system. In most large systems the number of gates and the number of connections are major factors that affect the cost of the system. An...
Recent acheivements in high speed digital integrated
circuits has prompted the system designers to search for
a practical method of inter-connecting these high speed
circuits. This paper describes the implementation of the
microstrip transmission line on a high speed digital
data bus. Transmission line and characteristic impedance,
termination with single...
A model of a squirrel cage induction machine, d.c.-
link power supply and centrifugal pump is developed and
used in the design and evaluation of a perturbation feedback
control system for a sewage pumping station. A comparison
of the simulation model of the induction machine
and a laboratory machine to...
The purpose of this thesis is to represent and calculate unsymmetrical
secondary faults on a grounded wye-to-delta transformer
bank.
This thesis is specifically concerned with the secondary connections
often encountered in industrial installations. Faults on these
systems have not been adequately investigated.
Three types of faults are considered, namely:
1....
In an attempt to provide a practical means to measure the information
processing capacity of a real-time digital processing system a
theoretical framework, the Real-Time Schemata, whose basis is a
schematic description and a measure of "useful information," is presented.
The description applies to processes that would typically be
implemented...
A procedure for displaying cursory computer analyses of time
series acoustic signals is described. The graphic presentation is
optimized for visual analysis. The results displayed represent time
series signals and/or Power Spectral Density estimates.
Both hardware and software components of the procedure are
described and compared with current methods. Suggestions...
This paper is concerned with the application of
hierarchial and parallel computing structures to digital
data communications processing in a multi-access telecommunications
environment. Designs are analyzed and
evaluated in terms of data collected from remote access
tele-communications traffic and in terms of the application
to several processing problems in the...
Decimation and interpolation is shown to be an effective technique
for reducing the storage requirements for bandlimited time series.
Interpolation and decimation is theoretically developed using z-transform
theory and graphically interperted. A sequence of data acquired by sampling
a sonar signal is used to demonstrate the effects of decimation. Using...
A compartmental model of the immune system is simulated.
Chapter I discusses the importance of such a
model, reviews past immune system models, and summaries
the immunological theory the model is based upon. In
Chapter II, the compartmental representation of the immune
system is developed from immunological and physiological
theory....
A variational integral method in the Fourier transform domain is
used to calculate the characteristic normal mode parameters of a coupled
pair of nonsymmetrical microstrip transmission lines in an inhomogenous
dielectric medium under quasi-TEM conditions. These together with the
theory of such structures are used to show that ideal directional...
This thesis presents work done to verify the accuracy of a
heuristic method for computing availability percentiles for
cascaded independent systems. Previous work has provided a model
for a single line that will be used as the basis for a simulation
of cascaded and parallel systems of lines. The simulation...
The problem of synchronization arises in the interaction among
digital systems not sharing a common clock reference. The reliability of synchronizers is related to metastable operation of
bistable elements. Because of its subtle nature, the phenomenon
until recently was not widely researched. However, the literature
now contains a sound theoretical...
This paper corrects an apparent deficiency in the published
information concerning Hardware Description Languages (HDLs) by
introducing and discussing an approach for selecting an HDL for
use in a design project. Although three classes of HDLs are discussed
in this paper, High-Level Languages (HLLs), General Purpose
Simulation Languages (GPSLs) and...
This thesis reports on an investigation of the growth, by
Molecular Beam Epitaxy, of III,III-V ternary compound semiconductors.
Strained and unstrained growth was studied via the deposition of InGaAs
on GaAs and InP substrates. Lattice matched InGaAs on InP was grown,
and an in situ method was developed to find...
In microwave network analysis, proper matching of the measurement system is necessary to prevent measurement errors and provide a
proper terminating impedance for the device-under-test. To obtain
this matching, a buffer amplifier is often used in the first stage of
the network analyzer.
This study describes the design and analysis...
Linear phase variable filters that are obtained with a frequency transformation of the form cos(ω) = P(cos(W)) were analyzed, where P is a finite degree polynomial, ω is the prototype frequency and W is the transformed filter frequency. A new transformation of third order is proposed. The new variable filter...
Frequency domain design of deconvolution filters is
studied using Fast Fourier Transform. Filters for both the
spike and the Gaussian reflector wavelet are obtained. True
deconvolution filters are infinitely long IIR filters,
and frequency domain analysis is an effective way of
finding its optimum finite length approximation for an
arbitary...
The scope of this project was to build a high
energy impulse generator to be used for educational
and research purposes, such as small scale modeling
of lightning and switching surges or small scale
simulation of an electromagnetic pulse (EMP).
A one-stage impulse generator was designed to
deliver a voltage...
Two-way transmission of data on broadband community cable television systems is considered in this thesis. A discussion of the data transmission environment is presented which attempts to characterize the channel noise and interference which degrades data transmission performance. The analysis considers channel degradation resulting from additive gaussian noise and various...
White electroluminescence (EL) was observed for the
first time from diamond-like carbon (DLC) films at room
temperature. Electroluminescence was observed by the
application of ac voltages in excess of 200 V to a metal-insulator-
semiconductor (i.e. DLC)-insulator-metal (MISIM)
device structure.
For EL applications, three types of the DLC films were...
The objective of this thesis is to describe the design and
implementation of a VSLI reduced instruction set computer (RISC).
The RISC machine constitutes a new style of computer architecture.
It differs significantly from the complex instruction set computer
architectures (CISC) of the past. RISC architectures are
characterized by their...
A microprogramming teaching tool was designed and implemented. This tool was based on the Am 2900 bitslice microprocessor family. It provides tools for understanding software development for a simple bitslice microprocessor.
A compartmental model of lymphocyte circulation
through a lymphnode is derived and simulated. The
purpose of the model is to analyze experimental data and
in turn design experimental plans from the analysis in
order to obtain sufficient data for the organ-distributed
immune response. The model will be used to predict...
The U.S. Air Force models many naturally occurring
phenomena. To validate such models, an automated data
collection system is used. Since validation is dependent
upon correct data, an inexpensive method to detect
erroneous data was investigated. The method uses a Wiener
filter to predict values one sample in advance. If...
The sliding mode controller, based on the theory
of the Variable Structure System (VSS), is considered
for a robot manipulator. By consideration of VSS theory,
the nonlinear interactions of manipulator dynamics
are suppressed by use of linear sliding equations, and
VSS robustness with respect to the unknown physical manipulator
parameter...
This paper discusses the design strategies for interface of bus
architectures. It also describes the design of interface between the
two popular bus architectures, the Micro Channel and the Nu Bus.
The main objective of this thesis is to develop a procedure for
bus interface design and use this procedure...
This thesis describes the design of a Reduced Instruction Set Computer. Its instruction memory utilizes a unique cache architecture and a two-stage memory pipelining technique. Because of the bandwidth of the 64-bit instruction bus, instruction prefetching is possible and is implemented. The data memory is bridged by a four-way set-associative...
Increasing automation and highly flexible manufacturing processes cause increasing complexity for manufacturing system. FMS (Flexible Manufacturing System) is an approach to solve this problem. Since the elements of the FMS and manufacturing process performance are closely interrelated, the application of simple modeling and emulation techniques in the planning stages for...
Recently, switched-current circuits have received great
attention because they offer potentially better performance in terms
of speed, low voltage power supplies, and accuracy in mixed-mode
analog-digital signal processing. In this thesis, the distortion
characteristics, DC offset and AC gain errors induced by the threshold
voltage, channel width, channel length, and...
The new CMOS folded source-coupled logic (FSCL)
technique intended for mixed-mode integrated circuits has
been designed. It has advantages over conventional CMOS
circuit in terms of reduced current spike, circuit delay,
logic flexibility, and layout density. A simple CPU
implemented in 2 μm CMOS technology with a 5.0 volt supply...
A short-circuit-protected line-driver circuit is
particularly adapted for use in a CMOS differential line-driver
system, where one line-driver circuit provides a
true output signal, and another line-driver circuit
provides a complementary false output signal. A short-circuit
is sensed by measuring current through a secondary
pull-up transistor, and disabling a primary...
Morphological filters have shown good performance in various image processing applications. Furthermore, their algorithms are easy to implement in special architectures, with the exception that linear filtering cannot be implemented in many of these cases. In this study, a new architecture and corresponding algorithm, capable of realizing linear shiftinvariant filters,...
The system in this thesis uses multiple Intel iSBC86/12A cards
connected to the Intel Multibus. The system was written using the Intel
language PLM86. The final result is a low level debug tool that
provides the user with the following capabilities: examine/change
memory, examine/change processor registers, load a user written...
Minimizing the number of product terms in a PLA implementation is a large step
towards saving area on a VLSI chip using PLA logic. Due to the large amounts of computer
time necessary to achieve this minimization, a number of heuristic approaches have
been developed to provide near-optimal solutions in...
This paper describes the design and implementation of
"A multiprocessor node for communication and control"
(MPCC). MPCC is a high speed, high performance local area
network capable of performing real time control tasks. This
is achieved by the concurrent operation of two 8051
microcontrollers, a dual port RAM and the...
An important task of a Variable Speed Generation (VSG)
system is the capability to maintain and control the terminal
voltage at some desired value as determined by the
reactive power dispatch strategy.The main objective is to
design a sub-optimal fixed-parameter controller in the
sense that constraints with respect to practical...
The resolution of multiple overlapped reflections is
achieved by designing inverse filters using frequency
domain deconvolution. A careful study reveals a number of
problems involving frequency domain design of spike inverse
filters. These include the presence of noise and aliasing
in both the filter response and its output resulting from...
The core area of a conventional CMOS digital gate
array consists of only one size of NMOS device and one
size of PMOS device. Both primitives have fixed minimum
channel lengths, and this has significantly impeded analog
applications. This work has shown that by forming series
and parallel interconnections between...
"Expert systems" is an area in the field of
artificial intelligence which attempts to encode an
"expert's" heuristic knowledge and reasoning ability into
a computer program. The purpose of this study is to
investigate the applicability of using an "expert system"
in a closed-loop automatic control system.
An "expert system"...