In recent years, a new class of high-performance thin-film transistors (TFTs) has emerged comprising amorphous oxide channel materials composed of heavy-metal cations (HMCs) with (n-1)d¹⁰ns⁰ (n ≥ 4, where 'n' refers to the row of the periodic table) electronic configuration. This thesis is devoted to the fabrication and characterization of...
In advanced hybrid electric vehicle development, performance and dependability are essential considerations in the design process. High efficiency is crucial in a successful design and fault tolerance is necessary to provide limp-home capability under faulted operating conditions. The reduction of electromagnetic interference is mandatory to reduce interference in communications and...
A new approach to oversampled delta-sigma A/D converters ( AZ modulators ) is introduced, where a differential pseudo-Npath filter stage is used as a basic cell. In this band-pass application, the z to -zN transformation is employed to realize a RAM-type pseudo-2-path lossless integrator. The bandpass second-order and 4th-order delta-sigma...
With the ever-increasing demand for portable devices used in applications
such as wireless communication, mobile computing, consumer electronics, etc.,
the scaling of the CMOS process to deep submicron dimensions becomes more
important to achieve low-cost, low-power and high-performance digital systems.
However, this downscaling also requires similar shrinking of the supply...
This thesis focuses on two aspects of oxide-based thin-film transistors (TFTs), contact resistance and instability assessment.
First, determination of the contact resistance of indium tin oxide (ITO) on two wide-band gap semiconductors, zinc oxide (ZnO) and indium gallium oxide (IGO), is attempted and the effects of contact resistance on device...
At frequencies exceeding 1-2 GHz, the reactive nature of a silicon substrate must be accounted in the substrate network models used in substrate coupling simulation. High-frequency substrate models, containing reactive components, must be validated through high-frequency network analyzer measurements. Prior fabricated test fixtures have been modified to enable high-frequency (up...
The problem of locating a signal source, or an emitter, has many civilian and military applications, such as communication regulations enforcement, military reconnaissance, and search-and-rescue operations. Many of the most widely used emitter location methods rely on the accurate and robust estimation of the differential time delay,
or time-difference-of-arrival (TDOA),...
High performance multi-cell delta-sigma modulators are a preferred choice in applications which require programmability. Multi-cell delta-sigma modulators with M unit cells provide 10log10(M) SQNR improvement for the same thermal noise and bias power due to the uncorrelated quantization noises of the M unit ADCs. This concept is used in this...
FISHNET (Facilities Integrated in a Shared Habitat) is a communication subnet architecture utilizing a hybrid application of point-topoint and broadcast communications to achieve a high degree of network performance. This objective is achieved through utilizing a dual bus structure: a data bus and a control bus. The data bus consists...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....