Silicon integrated circuit (IC) technology has enabled numerous electrical and optical sensors used in biological and chemical assays, where they can increase performance while decreasing cost and size compared to traditional detectors. There is significant potential to further leverage IC technology for lab-on-chip applications, creating affordable and portable medical diagnostic...
The electrical stability of amorphous indium-gallium-zinc oxide (a-IGZO) thinfilmtransistors (TFTs) is investigated for flat-panel display applications. Althoughproducts incorporating a-IGZO TFT backplanes are already commercially available,e.g., iMac with 5K retina display, technical challenges need to be addressed for nextgenerationapplications, e.g., active-matrix organic light-emitting diode displays.Device stability is one crucial issue. The...
The need to detect trace amounts of target molecules is great, particularly when it comes to biosensing. With the early detection of a disease, the odds of the successful treatment of an individual increases significantly. To enhance the capability of biomolecular detection, we have created an optical biosensor capable of...
Several frequency and amplitude estimation algorithms are presented for balanced and unbalanced three-phase power grid systems. All the estimators are dynamic in nature and are implemented in the complex domain by transforming the three-phase power signals using Clarke’s transform. Specifically, we first construct a non-linear dynamic model of the complex...
Mobile video streaming has become an essential application in mobile wireless networks,making up most of the mobile data of today’s Internet traffic. Studies have shown that mobile video data is projected to make up about 78 percent of the global mobile data traffic, and that global mobile data traffic is...
The increasing demand for higher data-rates in spectrum-deficient indoor WiFi networks calls for the adaptation of hybrid systems, consisting of RF and optical wireless channels. The novel hybrid WiFi Free-Space Optical (WIFO) system was introduced to enhance the wireless capacity of indoor WiFi networks. In this thesis, an optical wireless...
This work presents a new data encoding scheme: Integrated Pulse Width Modulation (iPWM) for equalizing lossy wireline channels with the aim of achieving energy efficient wireline communication. The proposed scheme is able to overcome the fundamental limitations imposed by Manchester and Pulse Width Modulation (PWM) encoding on high data rate...
The trend towards higher resolution, faster refresh rate active-matrix liquid-crystal displays (AMLCDs) as well as the emergence of active-matrix organic light-emitting diode (AMOLED) displays is driving the demand for amorphous oxide semiconductor thin-film transistors (AOS TFTs) with higher mobility. A physics-based model for carrier transport in an amorphous semiconductor is...
Most of today’s Internet of Things (IoT) applications assume that data will be moved offdevices into centralized cloud platforms. While existing IoT systems leverage cloud-based analytics for meaningful data reasoning, the assumption that data should always be moved off the devices is problematic. The amount of data to be moved...
Scalable array transceivers with wide frequency tuning range are attractive for next-generationradios. Key challenges for such radios include generation of LO signals with widefrequency tuning range, scalable synchronization between multiple array unit cells andtolerance to in-band and out-of-band interferers. This thesis presents approaches toaddress these challenges in commercial CMOS technologies.The...
The internet-of-things is a growing market segment which is based on an arrayof portable communication devices with high power efficiency. Advanced semiconductortechnology can easily improve their digital performance, but the samecannot be said for the analog blocks which are vital to their operation. Highperformance analog circuits continue to use conventional...
Hydropower is the one of the oldest renewable energy technologies and is wrongly thought of today as having little room to grow. The opportunity for new hydropower capacity is immense through both technology advancement and run-of-river new stream reach projects. Despite the age of hydropower, a divide in opinion is...
Model Predictive Control (MPC) has previously been investigated on ocean waveenergy converters (WEC) to improve the amount of power captured, while respectingthe system constraints. Previous research done in the same area, focused onbuilding a control scheme by using the knowledge of the past & current statesof the system and predicting...
This dissertation focuses on extending the application scope of surface enhanced infrared absorption spectroscopy to gas sensing. The method we propose is incorporating plasmonic nanostructures with nano-composite material, metalorganic framework, which can selectively preconcentrate certain gas molecules into the nanopores. The preconcentrating property is first demonstrated by applying metal-organic framework...
This thesis investigates a novel cycloid electric machine that integrates both cycloid gear drive and permanent magnet synchronous machine (PMSM), and proposes to apply the machine in robotic transmission system. Cycloid gear drive is a transmission device that is commonly used to boost up the output torque. It has been...
Load modeling that can accurately represent the dynamic behavior of generators and loads is important in the operation and planning of transmission and distribution systems. Yet, it is a complex subject in power system research communities and electric utilities. The composition of the end-use loads is changing continually based on...
Wave energy converters (WECs) are a broad class of emerging technology that converts hydrokinetic energy into some other useful form, such as electricity. The last stage in this transformation, the power take-off (PTO) subsystem, is often not experimentally evaluated until half-way through the recommended development process. This delay in evaluation...
As the future electrical power systems tend towards smarter and greener technology, thedeployment of self-sufficient networks, or microgrids, becomes more likely. Microgridsmay operate on their own or synchronized with the main grid, thus control methodsneed to take into account islanding and reconnecting said networks. Isolation of subnetworks may be necessary...
Massive Multiple-User Miltiple-Input Multiple-Output (MU-MIMO) wireless communication systems incorporate promising advanced strong technologies for upcoming 5G communications. To obtain some of the high spectrum and energy e ciencies bonuses brought by MU-MIMO systems, the ability to obtain Channel State information, especially on the receiver side (CSI), is important. To minimize...
Triangulateration uses geometric distance to estimate the location of user by employing techniques like received signal strength (RSS), time-of-arrival (TOA), time-difference-of-arrival (TDOA) and image processing.
Radio frequency (RF) signal positioning using TOA or TDOA techniques generally requires timing synchronization of the anchors and/or the anchors and targets. If the desired...
Back end of line (BEOL) metal-insulator-metal capacitors (MIMCAPs) have become a core passive component in modern integrated circuits. International Technology Roadmap for Semiconductors (ITRS) projections for scaling of analog/mixed-signal MIMCAP applications require simultaneously increasing capacitance density while maintaining low leakage current density and low voltage nonlinearity (characterized by the quadratic...
Coverage algorithms for deployment of WiFO - a hybrid femtocell architecture based on WiFi and Free Space Optical (FSO) technologies are studied to significantly increase wireless throughput of existing WiFi networks. In contrast with existing WiFi networks, WiFO incorporates small cell size, line of sight transmissions, and the Gaussian attenuation...
When the term renewable energy is mentioned in a conversation, wind, solar, and hydro energy typically come to mind. However, there is one major resource that has remained mostly untapped: wave energy. Wind and solar power technologies are well established around the world but they cannot generate electricity all the...
We explored an optofluidic sensing mechanism from inkjet-printed droplets on diatom biosilica using surface-enhanced Raman scattering (SERS). Our study revealed a new biosensing strategy that combines the microscopic fluidic flow induced by the droplet evaporation and the photonic crystal effects of diatom frustules, which can provide an ultra-sensitive, cost-effective biosensing...
There are generally two types of multiview video:(1) 3D Multiview Video (“3D MVV” also called “2D plus delta” or “stereo” multi-view video): 3D MVV is widely deployed in cinemas and in the TV industry. 3D MVV typically entails capturing video of an object using two cameras with differing view angles...
Wireless power transfer (WPT) is a way to transfer power from one device to another without any wire or cable connections. Although the technology has been around for more than 100 years, it is gaining popularity in recent years due to the ever-increasing demand for faster and more frequent charging...
Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...
As the CMOS process scales down to submicron, digital circuit performance improves, while reduced supply voltage and lower transistor intrinsic gain make it difficult to implement analog circuits in a power efficient manner. Therefore, it has become advantageous to shift more analog signal processing functions conventionally realized in voltage (analog)...
Recent sensor System-on-Chips (SoC) have enabled significant advances in energy-efficiency by incorporating various micro-powered building blocks. Unfortunately, most of these sensor systems do not address the high power cost associated with data storage and transmission, which in some cases vastly exceeds the power consumed by the rest of the SoC....
It has been estimated that data traffic from the different mobile devices that range from smartphones to machine-to-machine (M2M) devices will exceed 15.9 exabyte per month by the year 2018. With this immense data growth, the current wireless communication systems suffer from the scarcity of the radio spectrum and eventually...
This dissertation presents a phase domain in-loop-bandwidth spread-spectrum clock generation technique. In this proposed technique, a charge-based discrete-time loop filter is proposed to enable the phase domain in-loop-bandwidth spread-spectrum modulation without a delta-sigma modulator or time-to-digital converter. The in-loop-bandwidth modulation technique maximizes the loop bandwidth to improve phase noise suppression...
The current state of research on gossip techniques for wireless broadcasting is very limited because past research efforts have mostly focused on using gossip techniques for multicast communication. On the other hand, those research efforts that have focused on using gossip techniques for wireless broadcast communications ignore energy efficiency and...
Recently, there has been peaked interest in developing high energy producing and optimized power take-off topologies for Wave Energy Converters (WEC). As large as the potential of the oceans may seem, harnessing that energy and effectively converting it to electricity in significant amounts is a challenge. Currently, there are no...
We demonstrated a low-cost and high-sensitivity DNA detection method using quantum dot-fullerene based molecular beacons (MBs) and magnetic nanoparticles. The MB tethered magnetic nanoparticles can be well dispersed in analytes for efficient DNA capture and concentrated by an external magnetic field for enhanced fluorescence signal detection. The detection requires only...
Spintronics is an emerging field of research wherein the electron spin instead of, or along with, the conventional electron charge may be utilized in developing next generation logic devices. One of the most promising aspects of spintronics is that information transfer may be achieved by spin waves in logic devices,...
In bioacoustics, automatic animal voice detection and recognition from audio recordings is an emerging topic for animal preservation. Our research focuses on bird bioacoustics, where the goal is to segment bird syllables from the recording and predict the bird species for the syllables. Traditional methods for this task addresses the...
This dissertation focuses on the development of ultra-compact optical devices for free-space modulation. We propose a surface-normal modulator using metallic photonic crystals for free-space optical interconnects. The active control of light intensity is achieved by engineering the Fano resonances in metallic photonic crystals. Both thermo-optic modulation and electro-optic modulation of...
Incremental ADCs (IADCs) have found wide applications in sensor interface circuitry since, compared to ∆Σ ADCs, they provide low-latency high-accuracy conversion and easy multiplexing among multiple channels. On the other hand, continuous-time ∆Σ ADCs (CTDSM) have been receiving more and more attention as a power-efficient solution in targeting medium to...
Deep learning has greatly improved visual recognition in recent years. However, recent research has shown that there exist many adversarial examples that can negatively impact the performance of such an architecture. Different from previous perspectives that focus on improving the classifiers to detect the adversarial examples, this work focuses on...
Cognitive radio technology emerges as a promising solution for overcoming shortage and inefficient use of spectrum resources. In cognitive radio networks, secondary users, which are users equipped with cognitive radios, can opportunistically access spectrum assigned to primary users, the spectrum license holders. Although it improves spectrum utilization efficiency, this opportunistic...
Massive MIMO is a promising technique for future 5G communications due to its high spectrum and energy efficiency. To realize its potential performance gain, accurate channel state information at transmitter side (CSIT) is essential. Frequency division duplex (FDD) is widely employed by the most cellular systems today. However, it requires...
The rapid scaling of network bandwidth and data center throughput has motivated the wide adoption of high speed transceivers. Silicon photonics (Si-Photonic) is one of the most promising techniques to realize tightly integrated optical transceivers for next-generation high speed I O standards. This dissertation focuses on the design techniques of...
In wireless communication, channel state information (CSI) is essential for data detection. Fast fading coefficients estimation is important in order to acquire accurate CSI. Kalman filters (KF) are widely used for real time parameter estimation and can be used to estimate the fast fading coefficients of a mobile communication channel....
Transparent conductive oxides (TCOs), primarily indium doped tin oxide, have been widely used in numerous fields since decades ago, such as solar cells, displays, OLEDs and ‘smart windows’ etc. Owing to the scarcity of indium, there is a great demand for new alternative materials. Metal/insulator/metal (MIM) diodes are a critical...
Energy consumption has become a great deal for cloud service providers due to financial as well as environmental concerns. Studies show that cloud servers operate, most of the time, at only between 10% and 50% of their maximal utilizations. These same studies also show that servers that are kept ON...
Magnetic thin films have potential to improve devices such as on-chip inductors, and enable new technologies such as magnetic random access memory (MRAM).
The use of magnetic cores in on-chip inductors is typically limited to applications well under 1 GHz. At higher frequencies, the performance of the magnetic core is...
The National Conference of State Legislatures NCSL declares that 29 states have
been active in adopting and increasing renewable portfolio standards. Present
renewable portfolio standards require utilities to increase integration of renewable
energy sources such as photovoltaic (PV). The increased penetration of PV systems
is expected to destabilize the power...
This work presents the design and implementation of a low power phased-array receiver frontend at 28 GHz in 65 nm CMOS. The frontend incorporates a low- power low-noise amplifier(LNA) and a passive reflection-type phase shifter (RTPS) capable of providing 360° phase shift with 5-bit phase resolution and low loss variation....
Inkjet printing offers a cost effective, highly customizable method for rapid manufacturing of functional devices with minimal material waste. Although this method has been used for a variety of composites, little work has been done in the area of 3D printing magnetic composites. Presented here is a process for inkjet...
Modern variable speed machine drive (VSMD) systems are used for a variety of purposes including generation, propulsion, pumps and compressors. They employ high switching frequency power electronics to drive the electric machine. The machine is subject to large voltage overshoot if long power cables, are used, called Reflected Wave Phenomena...