For today’s ubiquitous portable devices, innovative integrated circuits with high performance
yet very low power are necessary. As these devices are used to communicate and sense real world signals in the environment, analog-to-digital converters (ADC) and systems are the key interface circuits needed to digitize the sensed information and they...
Time-domain data conversion has recently drawn increased research attention for its highly digital nature in favor of process technology scaling. Also, as the time information being carried by binary voltage, time-domain operation is much less sensitive to voltage noise compared to conventional voltage domain operation. However, for analog-to-digital converter (ADC)...
Nowadays, needs for wideband and high accuracy analog-to-digital converter are increasing rapidly in manifold applications such as wireless communication, digital video and other consumer electronics. Besides, low power consumption is required to have longer battery life in portable systems. CMOS technology scaling and innovative modulator topology make the implementation much...
In this dissertation, time-based signal processing techniques and their applications in oversampling and noise-shaping data converters are examined. These techniques demonstrate the ability to shift the burden of high performance analog circuits from the compressed voltage-domain to the augmented time-domain. First, the potential of high order noise-shaping and phase-domain feedback...
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital and digital-to-analog converters. These oversampled data
converters have several advantages over conventional Nyquist-rate converters, including
an insensitivity to many analog component imperfections, a simpler antialiasing filter and
reduced accuracy requirements in the sample and hold. Though the initial...
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital and digital-to-analog converters (ADCs and DACs). Most
delta-sigma modulators in production today employ single-bit quantization because a 1-bit DAC is inherently linear, whereas a multi-bit DAC is not. Were it not for this drawback,
the use of multi-bit...
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).
These oversampled data converters have several advantages over conventional Nyquist-rate
converters, including an insensitivity to many analog component imperfections, a
simpler antialiasing filter and reduced accuracy requirements in the sample and hold....
This thesis presents a continuous time bandpass delta sigma modulator with frequency translation inside the delta sigma loop. The input IF signal is down converted to baseband after amplification by a low Q, wideband bandpass resonator. The down converted IF signal is digitized by a continuous time, second order lowpass...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
There is a significant need in recent mobile communication and wireless broadband
systems for high-performance analog-to-digital converters (ADCs) that have wide
bandwidth (BW>5-MHz) and high data rate (>100-Mbps). A delta-sigma ADC is
recognized as a power-efficient ADC architecture when high resolution (>12-b) is
required. This is due to several advantages...
As CMOS processes keep scaling down devices, the maximum operating frequencies of CMOS devices increase, and hence circuits can process very wide band signals. Moreover, the small physical dimensions of transistors allow the placing of many more blocks into a single chip, including highly accurate analog blocks and complicated digital...
Advances in electronic systems have lead to the demand for high resolution, high bandwidth Analog-to-Digital Converters (ADCs). Oversampled ADCs are well- known for high accuracy applications since they benefit from noise shaping and they usually do not need highly accurate components. However, as a consequence of oversampling, they have limited...
Delta-sigma analog-to-digital converters (ADCs) are suitable for many applications due to several advantages such as relaxed anti-aliasing filter, high signal-to noise and distortion ratio (SNDR) and most important of all, reduced sensitivity to
analog imperfections.This thesis introduces several structures to overcome loop imperfections and stability issues in delta-sigma modulators. First,...
High speed and high resolution analog-to-digital converter is a key building block for broadband wireless communications, high definition video applications, medical images and so on. By leveraging the down scaling of the latest CMOS technology and the noise shaping properties, delta-sigma (ΔΣ) ADCs are able to achieve wide-band operation and...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are traditionally used in high quality audio systems, instrumentation and measurement (I&M) and biomedical devices. With the continued downscaling of CMOS technology, they are becoming popular in wideband applications such as wireless and wired communication systems,high-definition television and radar systems. There are two general realizations...
High performance multi-cell delta-sigma modulators are a preferred choice in applications which require programmability. Multi-cell delta-sigma modulators with M unit cells provide 10log10(M) SQNR improvement for the same thermal noise and bias power due to the uncorrelated quantization noises of the M unit ADCs. This concept is used in this...
This dissertation presents a dual-path 2-0 MASH (Multi-stAge-noise -SHaping) ADC with two verified digital corrections of DAC mismatch error and quantization noise leakage. By using these two techniques, the requirements for the analog circuits are greatly relaxed. The dual-path structure generates two outputs, one only composed of conversion errors, the...