A versatile computational technique for improved time domain modeling of electromagnetic radiative systems is demonstrated. Two computational methods are combined: the finite-difference time domain (FDTD) method, a full-wave electromagnetic field solver, and the Kirchhoff surface integral formulation, a spatial transformation technique. The combined FDTD/Kirchhoff technique is shown to increase accuracy...
Current trends in integrated circuit technology are continuing towards physically smaller components and related structures. Interconnects between circuit components have reached sub-micron dimensions which can not be modeled accurately by the current ideal microstrip analysis based techniques. These techniques often assume that the structure being modeled is perfectly conducting, smooth,...
The purpose of this study is to develop experimental techniques to
characterize typical interconnect discontinuities, including bends, steps, T
junctions, vias and pads, which are the most commonly encountered
interconnections in high speed digital integrated circuits, hybrid and
monolithic microwave circuits and electronic packages. The time domain
reflection response of...
In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
Recent advances in wireless technologies have helped the proliferation of wireless devices, ranging from hand-held devices such as cellular phones to more powerful mobile computing platforms as such laptops [1]. Along with that, the end users’
applications running on these devices, ranging from text message to multimedia applications such as...
Threshold-based time of arrival (TOA) estimation is a technique for high-precision indoor localization. Existing threshold selection methods, such as xed thresh- old and normalized threshold methods, do not consider the signal-to-noise radio (SNR) value at the receiver. This is not desired for high-precision positioning. A proper threshold value depends on...
Brushless Doubly Fed Machines (BDFM) have potential advantages in variable
speed generation and adjustable speed drive applications. The most significant of these
advantages is a reduction in the power electronic converter rating, and therefore a
reduction in overall system cost. Presently, efforts are being directed at optimizing the
design of...
A new second order accurate nonuniform grid spacing technique which does not
depend on supraconvergence is developed for Finite Difference Time Domain (FDTD)
simulation of general three dimensional structures. The technique is useful for FDTD
simulations of systems which require finer details in small regions of the simulation space by...
In recent years, a new class of high-performance thin-film transistors (TFTs) has emerged comprising amorphous oxide channel materials composed of heavy-metal cations (HMCs) with (n-1)d¹⁰ns⁰ (n ≥ 4, where 'n' refers to the row of the periodic table) electronic configuration. This thesis is devoted to the fabrication and characterization of...
Amorphous metal thin films (AMTFs) are of potential use for metal-insulator-metal (MIM) tunnel diode applications due to their ultra-smooth surfaces, a consequence of their amorphous microstructure. The objective of this thesis is to design a thermally-stable AMTF capable of maintaining MIM tunnel diode performance after a post-deposition anneal in excess...
The purpose of this thesis is to investigate the necessity of
transposition in the construction of overhead transmission lines.
Line currents, line voltages and line losses of both the transposed
and untransposed lines were calculated and compared for two different
voltage classes. The conventional method of symmetrical components
was used...
Two-way transmission of data on broadband community cable television systems is considered in this thesis. A discussion of the data transmission environment is presented which attempts to characterize the channel noise and interference which degrades data transmission performance. The analysis considers channel degradation resulting from additive gaussian noise and various...
The question of the suitability of Walsh functions or
similar bi-valued functions used as a radar electromagnetic
carrier waveform is considered. Walsh functions are
described and effective sinusoidal steady state transfer
functions are defined for transmission elements, antenna
systems, and propagation media.
The argument is made that the unit impulse...
Previous research has shown that women are increasingly sexualized in a variety of media contexts. I conducted a content analysis of film trailers from 2018 and 2019 to examine the relationship between the sexualization and objectification of female-presenting characters to the popularity of the film and its trailer. A random...
With each generation of technology, computers become even more capable of rendering objects with an ever increasing number of polygons. As a result, the desire to add more details to a 3D model increases as well. Among the many tools provided by computer graphics software that an artist has at...
An accurate state estimation plays an essential role in power system operation and planning in energy management systems. However, existing multi-area state estimation researches have not focused on the importance of system clustering. The clustering mechanism divides or partitions a system according to user-defined criteria. Few published research works have...
Minimizing the dynamic power consumption of a circuit is becoming a more and more important issue for digital circuit design in the age of portable electronics. Among all the arithmetic circuits, addition is the most fundamental operation. Therefore, designing low power adder is an important and necessary research area.
In...
The agricultural industry in the Western United States continues to possess issues of overwatering, accounting for over 80% of consumed water per year in the country. While technologies such as satellite imaging and sensor networks have slowly improved irrigation Best Management Practices to reduce superfluous water consumption, limitations associated with...
Rapid advances in technology have seen computing move from a
large central computer to desktop microcomputers.
This advance was also
seen in the design of dedicated computers, computers designed to perform a
few specialized tasks or duties.
These computers, or microcontrollers, are
often controlled by a central computer and themselves...