Index Catalog // ScholarsArchive@OSU

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Creator:: Zeuthen, Eric D.
Abstract:: The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Eric D. Zeuthen for the

Stability and Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions

Creator:: Walters, Eric M.
Abstract:: The Moderate or Intense Low-oxygen Dilution (MILD) combustion regime has received interest from the industrial furnace and gas turbine engine industries due to attractive properties of reduced NO[subscript x] emissions and high thermal efficiency. MILD combustion is characterized by low oxygen concentrations (i.e. 3%-9% by volume) and high reactant temperatures....
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Eric M. Walters for the

Strength and corrosion resistance properties of a new aluminum solder

Creator:: Fauerso, Walter Eric
Resource Type:: Masters Thesis
Full Text:: aluminum solder STRENGTH .ND CORRO$ION RESISTANCE PROPJTIES OI A NE7I LUINU 2OLDF1 by VALT ERIC

Study of the Effects of Chain Whip Length and Bar Length on the Characteristics of Chain Shot

Creator:: Shannon, Eric R.
Abstract:: Timber harvesters are high powered industrial grade rigs used to fell, delimb, and cut to size large trees. Hydraulic motors power sprockets that drive chains around a guide bar that get extended through logs during cuts. As technological advances allow for higher speeds a phenomenon called “chain shot” has...
Resource Type:: Masters Thesis
Date Created:
Full Text:: MergedFile AN ABSTRACT OF THE THESIS OF Eric Shannon

Development of a control system for a walking machine leg

Creator:: Thompson, Eric William
Abstract:: This thesis presents a control system for a walking machine leg. The leg is representative of one of the six legs required for a proposed walking machine based on the geometry of the darkling beetle. Each of the three joints is controlled by a DC servo motor mounted to the...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Eric William Thompson for the degree of Master of Science in

Monitoring and diagnosis of a multi-stage manufacturing process using Bayesian networks

Creator:: Wolbrecht, Eric T.
Abstract:: This thesis describes the application of Bayesian networks for monitoring and diagnosis of a multi-stage manufacturing process, specifically a high speed production part at Hewlett Packard. Bayesian network "part models" were designed to represent individual parts in-process. These were combined to form a "process model", which is a Bayesian network...
Resource Type:: Masters Thesis
Full Text:: process using Bayesian networks AN ABSTRACT OF THE THESIS OF Eric T. Wolbrecht for the degree of Master

Operation and maintenance procedures for improving compressed air system efficiency

Creator:: Bessey, Eric G.
Abstract:: Air compressors are a significant industrial energy user and therefore a prime target for industrial energy audits. The project goals were to develop a software tool, AIRMaster, develop a methodology for performing compressed air system audits, and conduct field audits to refine the methodology and assess savings potential from six...
Resource Type:: Masters Thesis
Full Text:: air system efficiency AN ABSTRACT OF THE THESIS OF Eric G. Bessey for the degree of Master of

Model predictive control for sagittal plane locomotion

Creator:: Maunder, Cary R.
Abstract:: A distinct characteristic of legged locomotion is its periodic nature. This periodic motion, in the form of a periodic orbit, has been the target of many walking and running control strategies. The spring loaded inverted pendulum (SLIP) has become a popular model of sagittal plane locomotion, exhibiting behavior characteristic of...
Resource Type:: Masters Thesis
Full Text:: t s t J t L t u dtφ= + ∫ , (2.1) where φ is the performance index applied at a specific time, st

Evaluation of the predictive capability of two-phase flow maps for microchannel condensation of R-134a at low mass flux conditions

Creator:: VanderPutten, Michael A.
Abstract:: Predicting condensation flow regimes and the associated heat transfer and pressure drop in microchannels is critical for designing terrestrial and space systems for heating, cooling, power generation, and advanced manufacturing. It is well established that in flows approaching the microscale (Dh < 1 mm) gravity-dominated flow regimes become less relevant,...
Resource Type:: Masters Thesis
Full Text:: Working fluid f Fluid Velocity j Thermal Conductivity k Dimensionless Numbers Length l Bond

Heat transfer during the piston-cylinder expansion of a gas

Creator:: Rodrigues, Matthew Jose
Abstract:: The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
Resource Type:: Masters Thesis
Full Text:: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 J Results of Applying Alternate Models for the Polytropic Exponent . . . 173

ScholarsArchive@OSU

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Stability and Liftoff of Non-premixed Large Hydrocarbon Flames in MILD Conditions

Strength and corrosion resistance properties of a new aluminum solder

Study of the Effects of Chain Whip Length and Bar Length on the Characteristics of Chain Shot

Development of a control system for a walking machine leg

Monitoring and diagnosis of a multi-stage manufacturing process using Bayesian networks

Operation and maintenance procedures for improving compressed air system efficiency

Model predictive control for sagittal plane locomotion

Evaluation of the predictive capability of two-phase flow maps for microchannel condensation of R-134a at low mass flux conditions

Heat transfer during the piston-cylinder expansion of a gas

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search