Index Catalog // ScholarsArchive@OSU

A multichannel single frequency radio control system

Creator:: Hugelman, Rodney Dale
Resource Type:: Masters Thesis
Full Text:: 1ULTICHANNL SINGLE FREQUENCY R.DIO CONTROL S!STEI4 by RODNEY DALE HUGELMAN A trSIS submitted to

The application of statistical techniques to piston ring wear as influenced by gasoline additives and jacket temperature

Creator:: McLellan, Dale Lawrence
Resource Type:: Masters Thesis
Full Text:: TECHNIQUES TO PISTON RING WEAR AS INFLUENCED BY GASOLINE ADDITIVES AND JACKET TEMPERATURE by DALE

Integrated Evaluation of Drinking Water Purification: A Mixed-Method Laboratory and Field Assessment of a Biomass-Powered Water Treatment Technology

Creator:: Burleson, Grace Ellen
Abstract:: The global water crisis is defined as one of the major threats facing humankind over the next decade with over 1 in 10 people lacking access to clean drinking water worldwide. An estimated 1.2 million people pasteurize their drinking water by using boiling as an indicator. Pasteurization is the process...
Resource Type:: Masters Thesis
Full Text:: 24 Materials in the field: (A) Filters, (B) Vacuum pump, (C) Plastic funnel, (D) Rubber stopper and

Design, analysis, and validation of composite c-channel beams

Creator:: Koski, William C.
Abstract:: A lightweight carbon fiber reinforced polymer (CFRP) c-channel beam was previously designed using analytical theory and finite element analysis and subsequently manufactured through a pultrusion process. Physical testing revealed the prototype did not meet the bending and torsional stiffness of the beam model. An investigation revealed that the manufactured prototype...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ John P. Parmigiani A lightweight carbon fiber reinforced polymer (CFRP) c-channel beam

On the modeling and control of horizontal pendulum wave energy converters

Creator:: Boren, Blake C.
Abstract:: Presented is an investigation into the modeling, active control design, and simulation of a generic horizontal pendulum wave energy converter, known as a PWEC. A description is provided of the dominant attributes PWECs have, showcasing their promising potential as wave energy converters. Seeking to further promote this potential, an active...
Resource Type:: Masters Thesis
Full Text:: Modeling and Control of Horizontal Pendulum Wave Energy Converters by Blake C. Boren A THESIS submitted

Modeling the thermal inkjet firing process

Creator:: Davis, Colin C.
Abstract:: A numerical model has been developed to simulate the firing of an inkjet printhead. The model evaluates the heat generation and diffusion within the thin film structure, the phase change and vapor bubble growth in the ink, and the subsequent flow of ink from the orifice. The heat transfer is...
Resource Type:: Masters Thesis
Full Text:: ,.+02±(2,,2-1at cos 2a 2b cos 2c L a2 b2 a2 j 28 where a, b, and c are the cube's

Evaluating the effectiveness of interaction strategies between product developer and supply chain using activity based modeling in environmental benign product design

Creator:: Wang, Bo
Abstract:: With growing concerns on environment impact of industrial product development, the product developers are seeking better solutions to achieve desired environmental benign requirements by the regulators and customers besides economic growth. During the last decade, some of the most successful product development companies (such as HP) have established their own...
Resource Type:: Masters Thesis
Full Text:: measure its impact on Environmental Impact (E), Quality (Q), and Cost (C), of developing a product. In

A study of laser processed intermetallics

Creator:: Roub, Evangeline R.
Abstract:: The effects of laser processing of Ni₃Al, TiAl, Fe₃Al, and Ni₃Si on microstructure and phase composition were characterized using optical and scanning electron microscopy and X-ray diffraction analysis. It was found that laser processing resulted in melt zones of ordered phases with fine grains and microstructures. The effects of heat...
Resource Type:: Masters Thesis
Full Text:: Micrograph of Ni3A1 laser pass, 0 Hr HT, X50 a) substrate, b) Melt flow bottom, c) melt flow, d) melt zone, e

The experimental characterization of membrane behavior in two-phase gas extraction

Creator:: Cappello, Nicholas C.
Abstract:: Understanding the behavior of hydrophobic membranes is important for applications where separating a gas from a liquid-gas mixture is beneficial. For example, in-situ vapor extraction can be used in microscale heat sinks to improve heat transfer and flow stability. In this study, gas is experimentally evaluated flowing through flexible polytetrafluoroethylene...
Resource Type:: Masters Thesis
Full Text:: a function of pressure: (a) ex- ponential curve fit of the form Eq. (6.5) with C = 7 and n = 0.4 (b

A study of forces on simulated heat exchange tubes immersed in a cold fluidized bed

Creator:: Donovan, Jerry Eugene
Abstract:: The object of this research, project was to study how different parameters effect the magnitude and frequency composition of forces exerted on simulated heat exchange tubes immersed in a cold fluidized bed. Two arrays of tubes were assembled with the tubes mounted in an equilateral triangular pitch pattern. The center...
Resource Type:: Masters Thesis
Full Text:: the parameters are given in Appendix C. In Figures 28 30, the statistical data is plotted as a

ScholarsArchive@OSU

A multichannel single frequency radio control system

The application of statistical techniques to piston ring wear as influenced by gasoline additives and jacket temperature

Integrated Evaluation of Drinking Water Purification: A Mixed-Method Laboratory and Field Assessment of a Biomass-Powered Water Treatment Technology

Design, analysis, and validation of composite c-channel beams

On the modeling and control of horizontal pendulum wave energy converters

Modeling the thermal inkjet firing process

Evaluating the effectiveness of interaction strategies between product developer and supply chain using activity based modeling in environmental benign product design

A study of laser processed intermetallics

The experimental characterization of membrane behavior in two-phase gas extraction

A study of forces on simulated heat exchange tubes immersed in a cold fluidized bed

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search