Search Constraints

Start Over
Filtering by: Creator Evans, T. Matthew Remove constraint Creator: Evans, T. Matthew Degree Field Mechanical Engineering Remove constraint Degree Field: Mechanical Engineering Degree Level Master's Remove constraint Degree Level: Master's

Search Results

  • Heat transfer during the piston-cylinder expansion of a gas

    Creator:
    Rodrigues, Matthew Jose
    Abstract:
    The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
    Resource Type:
    Masters Thesis
    Full Text:
    AN ABSTRACT OF THE THESIS OF Matthew Jose Rodrigues for the degree of Master of Science in

  • Automated Tradeoff Analysis of Cost Versus Machinability for Design Feedback

    Creator:
    Grier, Alan Thomas
    Abstract:
    As CAD tools become more sophisticated, engineers are able to more easily create complex part geometries with minimal mass given strength and stiffness requirements. However, these complex part geometries can be difficult to subtractively manufacture, which consequently increases manufacturing cost and production time. This thesis presents a method independent of...
    Resource Type:
    Masters Thesis
    Full Text:
    Analysis of Cost Versus Machinability for Design Feedback Abstract approved: Matthew I. Campbell As CAD

  • Automated Synthesis of Planar Mechanisms with Revolute, Prismatic and Pin-In-Slot Joints

    Creator:
    Huang, Weifeng
    Abstract:
    The intent of this research is to explore the entire design space of mechanism topologies by using a graph grammar synthesis approach. A new graph representation of planer mechanism has been developed to represent the planar mechanism with revolute (R), prismatic (P), and pin-in-slot (RP) joints. Following Gruebler's equation, the...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Matthew I. Campbell The intent of this research is to explore the entire design space of

  • Quantification of total and plastic 3D strain fields within micro-damaged polyurethane foam

    Creator:
    Sutton, Matthew T.
    Abstract:
    Local material damage that occurs within cellular solids, such as polymer foams and trabecular bone, and precedes local fractures of the cell struts or walls is called micro-damage. The accumulation of micro-damage within cellular solids is often undesirable, although it is thought to be vital to the development and health...
    Resource Type:
    Masters Thesis
    Full Text:
    3D Strain Fields Within Micro-damaged Polyurethane Foam by Matthew T. Sutton A THESIS

  • Feasibility of Lorentz mixing to enhance combustion in supersonic diffusion flames

    Creator:
    Nahorniak, Matthew T.
    Abstract:
    The purpose of this research was to determine if it is feasible to apply Lorentz mixing to supersonic diffusion flames, such as those found in SCRAMjet engines. The combustion rate in supersonic diffusion flames is limited by the rate at which air and fuel mix. Lorentz mixing increases turbulence within...
    Resource Type:
    Masters Thesis
    Full Text:
    supersonic diffusion flames AN ABSTRACT OF THE THESIS OF Matthew T. Nahorniak for the degree of Master

  • Automated Design of Foam Packaging Shapes

    Creator:
    So, David M.
    Abstract:
    Creating effective packaging is about finding a balance between product protection during shipping and time consumption in the design process. Given time and cost constraints, it is hard to produce sufficiently protective padding while having it not be thicker than it needs to be. This thesis describes a method to...
    Resource Type:
    Masters Thesis
    Full Text:
    approved: _____________________________________________________ Matthew I. Campbell Creating

  • Design Automation for 3D Circuits

    Creator:
    Velayati, Mohammad
    Abstract:
    Traditional electronic systems are usually fabricated via printed circuit boards (PCBs). In a regular PCB, the electronic components are placed and mounted on a two-dimensional board. Such a component layout limits the freedom in the component placement process which results in larger electronic devices. With the use of Additive Manufacturing...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Matthew I. Campbell Traditional electronic systems are usually fabricated via printed

  • Design automation for 3D circuits

    Creator:
    Velayati, Mohammad
    Abstract:
    Traditional electronic systems are usually fabricated via printed circuit boards (PCBs). In a regular PCB, the electronic components are placed and mounted on a two-dimensional board. Such a component layout limits the freedom in the component placement process which results in larger electronic devices. With the use of Additive Manufacturing...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Matthew I. Campbell Traditional electronic systems are usually fabricated via printed

  • Applications of an Agent-Based Approach to Automated Structure Design

    Creator:
    Kiff, Robin E.
    Abstract:
    This thesis details the applications of a new method of agent-based structure synthesis. The goal of this research is to create structures that meet a structural goal within a simulated physics environment. The method proposed works as an iterative process of changing the structure, evaluating the new structure and using...
    Resource Type:
    Masters Thesis
    Full Text:
    : ______________________________________________________ Matthew I. Campbell This thesis details the applications of a new method of agent-based

  • Dividing Complex Parts into Multiple Pieces for Advanced Joining and Additive Manufacturing

    Creator:
    Massoni, Brandon R.
    Abstract:
    Poor material utilization is inherent to conventional manufacturing processes, leading to high material waste and machining times. Additive manufacturing processes attempt to solve this issue by allowing production of near-net shapes, but the processes may be too expensive or infeasible. By leveraging both processes in a single part, the waste...
    Resource Type:
    Masters Thesis
    Full Text:
    Matthew I. Campbell Poor material utilization is inherent to conventional manufacturing processes