Index Catalog // ScholarsArchive@OSU

A portable pumping system for hydraulic excavation of commercial crab pots

Creator:: Chang, Terrill John
Abstract:: The design and testing of a portable pumping system for use in the hydraulic excavation of commercial crab pots buried by ocean sediment was undertaken. The resulting portable system retained the four major components of the pumping systems presently used by commercial fishermen: engine, pump, fire hose, and nozzle. Because...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF TERRILL JOHN CHANG for the

Hybrid Desktop Processes for Integrated Deposition and Low-cost, In-situ Sintering of Metallic and Non-metallic Conductive Nanoparticles

Creator:: Bhandari, Roshan
Abstract:: Microscale continuous thin films or patterned conductive structures find applications in thin film electronics, energy generation and functional sensor systems. An emerging alternative to conventional vacuum based deposition of such structures is the additive deposition and sintering of conductive nanoparticles, to enable low temperature, low- cost and low energy fabrication....
Resource Type:: Masters Thesis
Full Text:: of sintered and unsintered film structures. I would also like to thank Dr. Chih-hung Chang for the

The significance and measurement of the Tsai-Wu normal interaction parameter F₁₂

Creator:: Hansen, William Christian
Resource Type:: Masters Thesis
Full Text:: normal interaction parameter F₁₂ AN ABSTRACT OF THE THESIS OF William Christian Hansen for the degree

Photonic Sintering of Nanoparticle Inks : Experimental Characterization, Computational Modeling and System Design for Additive Manufacturing

Creator:: MacNeill, William D.
Abstract:: Photonic sintering of nanoparticles is a relatively new process for sintering of nanoparticles, deposited on a substrate, into functional solid structures. The working principle of this process is the incidence of large-area broad-spectrum light onto deposited nanoparticles, which results in heat generation in the nanoparticles and their subsequent densification. Key...
Resource Type:: Masters Thesis
Full Text:: would like to thank Dr. Chih-hung Chang and his research group for project support. Also, I would like

A Conceptual Design Tool for High-performance Wave Energy Converters for Blue Economy Applications

Creator:: Roach, Aeron L.
Abstract:: Much like wind energy in its early years, marine energy has vast potential, and wave energy converter (WEC) concepts are constantly in development. Consequently, wave energy faces many challenges for expansion and has a wide-ranging design space of WEC concepts. The large design space demands new methods for understanding the...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Aeron L. Roach

Design Optimization of a Structurally Flexible Wave Energy Converter with a Direct Search Algorithm

Creator:: Berrier, Austin S.
Abstract:: Several wave energy converter designs have been recently proposed that are made of flexible materials. Flexible devices are able to generate electricity by being stretched, and are intended to simplify deployment and maintenance concerns over existing wave energy devices. Due to the relative infancy of flexible wave energy converters, however,...
Resource Type:: Masters Thesis
Full Text:: Structurally Flexible Wave Energy Converter with a Direct Search Algorithm Abstract approved: Bryony L

Advancing Wind Systems Design through Optimization and Improved Modeling

Creator:: Miller, Annalise M.
Abstract:: Wind energy plays an important and growing role in the US energy profile. While other countries have expanded their wind industries into offshore development, large investment costs have hindered progress in the US offshore market despite the larger and more consistent resource available offshore. In this research, I explore the...
Resource Type:: Masters Thesis
Full Text:: Systems Design through Optimization and Improved Modeling approved: Bryony L. DuPont Wind energy plays

Wave Energy From Idea, to Concept, to Converter: Structuring Methods for Design and Evaluation of Wave Energy Devices

Creator:: Trueworthy, Ali May
Abstract:: The amount of energy we use and the ways that we get that energy sit on the edge of dramatic change as the carbon budget which can keep the planet under 1.5C of global average temperature increase gets smaller (Allen, 2018). In response, we continue to research and develop renewable...
Resource Type:: Masters Thesis
Full Text:: Devices Abstract approved: Bryony L. DuPont The amount of energy we use and the ways that we get that

Temperature Evolution of Spark Kernels in Quiescent and Cross-flow Conditions

Creator:: Okhovat, Sebastian
Abstract:: Numerous physical and chemical processes are required for successful ignition of a flammable mixture, many of which have been well characterized. However, one aspect of the ignition process that has received limited consideration is understanding the temperature of the spark kernel. A spark kernel is the volume of heated gas...
Resource Type:: Masters Thesis
Full Text:: . Abstract approved: ______________________________________________________ David L. Blunck

Design and construction of a small electric service vehicle

Creator:: Holt, Steven Charles
Abstract:: In an effort to fill an existing need two small electric service vehicles were designed, constructed, and tested. The first acted as a feasibility study and the second as a design prototype. The vehicles had low cost and the capability of being fabricated by their users as two main design...
Resource Type:: Masters Thesis
Full Text:: SMALL ELECTRIC SERVICE VEHICLE Abstract approved: Redacted for Privacy L. E. Joh, In an effort to

ScholarsArchive@OSU

A portable pumping system for hydraulic excavation of commercial crab pots

Hybrid Desktop Processes for Integrated Deposition and Low-cost, In-situ Sintering of Metallic and Non-metallic Conductive Nanoparticles

The significance and measurement of the Tsai-Wu normal interaction parameter F₁₂

Photonic Sintering of Nanoparticle Inks : Experimental Characterization, Computational Modeling and System Design for Additive Manufacturing

A Conceptual Design Tool for High-performance Wave Energy Converters for Blue Economy Applications

Design Optimization of a Structurally Flexible Wave Energy Converter with a Direct Search Algorithm

Advancing Wind Systems Design through Optimization and Improved Modeling

Wave Energy From Idea, to Concept, to Converter: Structuring Methods for Design and Evaluation of Wave Energy Devices

Temperature Evolution of Spark Kernels in Quiescent and Cross-flow Conditions

Design and construction of a small electric service vehicle

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search