Index Catalog // ScholarsArchive@OSU

Investigation of combustor and fuel preparation requirements for a combined-cycle wood fired power plant

Creator:: Bauer, Timothy Lee
Abstract:: The Pacific Northwest is a particularly good candidate for a power plant fired with wood since the wood products industry is so important in the area. The combined cycle concept for such a plant has increased in popularity due to the generally greater efficiency of the gas turbine part of...
Resource Type:: Masters Thesis
Full Text:: requirements for a combined-cycle wood fired power plant AN ABSTRACT OF THE THESIS OF Timothy Lee Bauer for

Digital Co-Creation: An Early Stage Product Personalization Methodology to Bridge the User-Designer Void

Creator:: Slama, Timothy J.
Abstract:: Modern product development is a complex combination of multidisciplinary processes ranging from market research to design, engineering analysis, and logistics. The product development process has a significant impact on the success or failure of new product launches. The majority of consumer product launches fail, resulting in significant sunk cost in...
Resource Type:: Honors College Thesis
Full Text:: Methodology to Bridge the User-Designer Void by Timothy James Slama A THESIS

Natural convection from a horizontal cylinder parallel to a heated vertical wall

Creator:: McCoy, Timothy J.
Abstract:: Heat transfer measurements have been made from a long (L/D = 15) horizontal cylinder in water parallel to a heated vertical wall. The cylinder and wall boundary conditions were isothermal, and they were maintained at equal temperatures. The investigation covered Rayleigh numbers based on cylinder diameter from 400,000 to 10,000,000....
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Timothy J. McCoy for the degree

Reverse engineering, modeling, and redesign of a vibratory conveyor

Creator:: Foglesong, Timothy J.
Abstract:: Some successful products are still developed and produced without the benefit of modern design techniques. One such product is a vibratory conveyor that has been developed largely through prototype iteration. The manufacturer has collaborated with Oregon State University to introduce model-based design into the development process. This research details a...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Timothy J Foglesong for the

Using discrete-event simulation to study the influence of log yard sorting on sawmill processing efficiency of small-diameter timber

Creator:: Pinon, Olivia J.
Abstract:: A sawmill is similar to other manufacturing enterprises when it comes to making decisions, scheduling production and meeting customer demands. In order to help sawmills achieve their goals, and because there is such a high degree of variability in the raw material used in this industry, computer simulation has proven...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Olivia J. Pinon for the degree of

Three-dimensional, nonlinear viscoelastic analysis of laminated composites : a finite element approach

Creator:: Wang, Min
Abstract:: Polymeric composites exhibit time-dependent behavior, which raises a concern about their long term durability and leads to a viscoelastic study of these materials. Linear viscoelastic analysis has been found to be inadequate because many polymers exhibit nonlinear viscoelastic behavior. Classical laminate theory is commonly used in the study of laminated...
Resource Type:: Dissertation
Full Text:: : Timothy C. Kennedy Polymeric composites exhibit time-dependent behavior, which raises a concern about

A study of cavitation instabilities in solids

Creator:: Puttapitukporn, Tumrong
Abstract:: Cavitation instabilities in elastic-plastic solids under spherically-symmetric and axisymmetric loadings were investigated using the finite element method. Both quasi-static and dynamic analyses were used to solve these problems. In the quasi-static analyses, we investigated a cavitation instability in elastic/perfectly-plastic, linear hardening elastic-plastic, power hardening elasticplastic, and constrained silver materials. Here,...
Resource Type:: Dissertation
Full Text:: Cavitation Instabilities in Solids. Abstract anoroved: Timothy C. Kennedy Cavitation instabilities in

A nonlocal damage theory for laminated plate with application to aircraft damage tolerance

Creator:: Nahan, Matthew F.
Abstract:: Design of commercial aircraft structure, composed of composite material, requires the prediction of failure loads given large scale damage. In particular, a fuselage of graphite/epoxy lamination was analyzed for damage tolerance given a standard large crack that severed both skin and internal structure. Upon loading, a zone of damage is...
Resource Type:: Dissertation
Full Text:: : Timothy C. Kennedy Design of commercial aircraft structure, composed of composite material, requires the

A study of forces on simulated heat exchange tubes immersed in a cold fluidized bed

Creator:: Donovan, Jerry Eugene
Abstract:: The object of this research, project was to study how different parameters effect the magnitude and frequency composition of forces exerted on simulated heat exchange tubes immersed in a cold fluidized bed. Two arrays of tubes were assembled with the tubes mounted in an equilateral triangular pitch pattern. The center...
Resource Type:: Masters Thesis
Full Text:: HEAT EXCHANGE TUBES IMMERSED IN A COLD FLUIDIZED BED Abstract approved: Redacted for Privacy (Timothy

Micromechanics of heterogeneous materials under compressive loading

Creator:: Laird, George
Abstract:: In mining and mineral processing, compressive loading is often encountered during the comminution of ore bearing minerals and in the wear resistant materials used in the comminution circuit. A common thread joining many of the materials that are primarily used under compressive loading is the presence of a high modulus...
Resource Type:: Dissertation
Full Text:: Many thanks go to my major advisor, Dr. Timothy C. Kennedy for his thoughtful advice and encouragement

Simulating changing diameter distributions in a softwood sawmill

Creator:: Salichon, Maxence C.
Abstract:: Sawmills are very complex systems that involve many manufacturing processes. The variability of their raw material adds further to this complexity as each log has characteristics that determine its processing path. Therefore, computer simulation is a very useful technique for analyzing sawmill performance. This thesis describes a simulation computer model...
Resource Type:: Masters Thesis
Full Text:: professors, Dr. Charles C Brunner and Dr. Timothy C. Kennedy for their invaluable support, assistance and

Development of acoustic emissions testing procedures applicable to conventionally reinforced concrete deck girder bridges subjected to diagonal tension cracking

Creator:: Lovejoy, Steven C.
Abstract:: A need exists to develop a non-destructive testing technique that can identify the formation and propagation of diagonal tension cracks in conventionally steel reinforced concrete deck girder (RCDG) highway bridges in the State of Oregon. Such a technique could be included into a structural health monitoring (SHM) system installed on...
Resource Type:: Dissertation
Full Text:: : Timothy C. Kennedy A need exists to develop a non-destructive testing technique that can identify

Failure analysis of pre-notched composite laminated plates under four-point bending conditions

Creator:: Arias Gonzales, Sergio
Abstract:: Ever since composite laminate technology was introduced into the aerospace and automotive industry, there has been a need to fully understand the damage progression experienced by composite laminated plates in the presence of a notch. While numerous research studies have been conducted on this matter when subjected to in-plane loads,...
Resource Type:: Dissertation
Full Text:: Bending Conditions Abstract approved: __________________________________________ Timothy C

Experimental and finite-element analysis of stress distributions near the end of reinforcement in partially reinforced glulam

Creator:: Kirlin, Chad P.
Abstract:: Recently, fiber-reinforced plastics (FRP lamina) have been applied to glued-laminated (glulam) timber for the purpose of improving bending strength and stiffness. Initially, full length reinforcement using FRP lamina was developed. However, the cost of FRP lamina is a significant portion of the total cost of reinforced glulam. Therefore, it is...
Resource Type:: Masters Thesis

Transient fuel pin temperature calculations using describing functions

Creator:: Guidotti, Timothy E.
Abstract:: An important element in rector safety and fuel performance assessments is the efficient calculation of the time dependent temperature profiles within reactor fuel pins. Because the fuel pins have temperature dependent thermal properties, the governing partial differential equations are nonlinear. Traditionally, finite difference or finite element methods have been used...
Resource Type:: Masters Thesis
Full Text:: describing functions AN ABSTRACT OF THE THESIS OF Timothy E. Guidotti for the degree of Master of Science

Usage of Digital Image Correlation in Single and Multiple Stereo Systems for Strain and Shape Measurement

Creator:: McKinley, Timothy A.
Abstract:: This dissertation details the application of digital image correlation (DIC) in novel methods for mechanical testing and shape characterization. The first usage manifested in the development of a novel composite test specimen that provided the ability to characterize the matrix compression energy release rate at initiation and subsequent crack propagation....
Resource Type:: Dissertation
Full Text:: AN ABSTRACT OF THE DISSERTATION OF Timothy McKinley

Turbulence induced loads on a teetered rotor

Creator:: Weber, Timothy L.
Abstract:: Development of variable speed horizontal axis wind turbines has resulted in a need for an analysis code with a rotor speed degree-of-freedom. This study develops a five degree-of-freedom time domain computer code that evaluates blade and rotor, mean and cyclic loads with nonlinear aerodynamics together with atmospheric turbulence as a...
Resource Type:: Dissertation
Full Text:: OF THE THESIS OF Timothy L. Weber for the degree of Doctor of Philosophy in Mechanical Engineering

Analysis of the Effects of Combustion Products on Forced Ignition and Turbulent Flame Propagation

Creator:: Bonebrake, Jonathan M.
Abstract:: Practical combustion devices frequently rely upon forced ignition of turbulent fuel/oxidizer mixtures that also contain the product species of combustion. Examples of this include engines that use exhaust gas recirculation (EGR), inter-turbine burners in aircraft engines, and other systems the utilize staged combustion. In this work, the effects of major...
Resource Type:: Dissertation
Full Text:: Research (contract N000141612429) and AFOSR. CONTRIBUTION OF AUTHORS Dr. Timothy Ombrello provided

Response of guyed offshore towers to stochastic loads in the presence of steady current

Creator:: Brynjolfsson, Sigurdur
Abstract:: The validity of the widely used stochastic linearization method for analysing the response of guyed towers to stochastic loads is investigated. The governing equations of a guyed tower have two main sources of nonlinearities, fluid-structure interaction and the restoring force of the cables. In this study, two models are considered....
Resource Type:: Dissertation
Full Text:: : / Dr. John W. Leonard Redacted for Privacy Dr. Timothy C. Kennedy The validity of the widely used

Elastodynamic analysis of a propagating finite crack in a micropolar elastic solid

Creator:: Han, Seog-young
Abstract:: A dynamic propagation of a finite crack of opening mode in a micropolar elastic solid was investigated. By using an integral transform method, a pair of twodimensional singular integral equations governing stress and couple stress was formulated in terms of the displacement transverse to the crack, macro- and microrotations, and...
Resource Type:: Dissertation
Full Text:: Reserved ACKNOWLEGEMENT I would like to express my appreciation to Dr. Timothy C. Kennedy and Dr

An experimental study of natural convection from protruding arrays on a vertical plate with and without an opposing wall for various fluids

Creator:: Lin, Peng-cheng
Resource Type:: Dissertation
Full Text:: Abstract approved: /Dwight J. Bushnell Natural convection from six rectangular protruding heated arrays

Distortion-induced fatigue cracking of girder-to-crossbeam connection

Creator:: Aljutaili, Dhari S.
Abstract:: Oregon Department of Transportation’s bridge no. 9743b is a multi-span, two-girder steel deck bridge connecting the busy interstates 5 and 205. Vertical cracks have been detected in the welded girder-to-crossbeam connections at the bents. Distortion-induced fatigue is suspected to be responsible for the cracking. Linear elastic beam analysis, 2-D and...
Resource Type:: Masters Thesis
Full Text:: Appendix B. The end moment is expressed as 2 16 .o PLM EI J = (4.2) where 3 3 3 3 2 xb

Design of a mechanically assisted dependent transfer mechanism for use on board commercial aircraft

Creator:: Gibson, Brenton D.
Abstract:: Business and recreation in the modern day world often include air travel as their cornerstone. Travelers who are disabled and wheelchair bound have to undergo a transfer process to board and deplane a commercial aircraft. This transfer process is typically done manually, with agents physically lifting the passenger who is...
Resource Type:: Masters Thesis

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: ABSTRACT OF THE THESIS OF Pierre J. Berbinau for the degree of Doctor of Philosophy in Mechanical

Quality driven collaborative decision making for product development under the influence of trustworthiness

Creator:: Meier, Stefan
Abstract:: The focus of this study is the effective prioritization of customer requirements in collaborative product development. The CR priorities are often retrieved by questioning and interviewing targeted customers. But the targeted customer might not always be easily questioned, because they might not always be obvious or clearly known. If customers...
Resource Type:: Masters Thesis
Full Text:: this thesis. The author also thanks Dr. Timothy C. Kennedy and Dr. Michael H. Freilich, who both

Evaluating the effectiveness of interaction strategies between product developer and supply chain using activity based modeling in environmental benign product design

Creator:: Wang, Bo
Abstract:: With growing concerns on environment impact of industrial product development, the product developers are seeking better solutions to achieve desired environmental benign requirements by the regulators and customers besides economic growth. During the last decade, some of the most successful product development companies (such as HP) have established their own...
Resource Type:: Masters Thesis
Full Text:: we all live far away from our parents. Also, thank Dr. Timothy C. Kennedy and Dr. Brian Bay to

The application of a band variable-inertia flywheel to an urban transit bus

Creator:: Moosavi-Rad, Hamid
Abstract:: This dissertation investigates by means of computer simulation the potential of a Band Variable-Inertia Flywheel (BVIF) to store energy for an urban transit bus. Replacing both a fixed-inertia flywheel (FIF) and a continuously variable transmission (CVT), the Band Variable-Inertia Flywheel is capable of accelerating a vehicle from rest to a...
Resource Type:: Dissertation
Full Text:: Professor Charles E. Smith for his support and assistance in this project; and Professors Timothy C

Automating aquatic insect identification through pattern recognition

Creator:: Thomas, Joshua K.
Abstract:: Aquatic insect population counts can be a good indicator of the health, or water quality, of rivers and streams. Stoneflies (Plecoptera) are particularly susceptible to pollution in streams. However, today’s current method for obtaining these population counts requires biologists to examine individual specimens under a microscope for identification to the...
Resource Type:: Masters Thesis

Composite and adhesive technology applied to chain saw guide bars

Creator:: Gabel, Preston S.
Abstract:: Increased competition in the market place for both occasional and professional chain saw users has led to a desire for improved performance in chain saw guide bars. One aspect of improved performance is lower bar weight. The primary focus of this research was to establish the feasibility of a lower...
Resource Type:: Masters Thesis
Full Text:: Istok, Dr. Timothy Kennedy and Dr. Skip Rochefort, I offer my most sincere thanks. A special thanks

Creep of Gr/BMI composite laminates in compression

Creator:: Tyagi, Sanjeev R.
Abstract:: The main source of the time-dependent behavior of fiber-reinforced composites is their polymeric matrix, which causes concerns about their long term durability. Although for composites where organic fibers such as Graphite are used, the fibers are also a contributing factor. A composite material may exhibit an appreciable amount of creep,...
Resource Type:: Masters Thesis
Full Text:: program. I would like to thank Dr. Timothy C. Kennedy, Dr. David G. Ullman and Dr. Rasaratnam Logendran

Wind turbulence input model for horizontal axis wind turbines

Creator:: Lin, Shuh-ren
Abstract:: In order to estimate wind turbine residL2;characteristics in the presence of atmospheric turbulence, the important atmospheric sources for the force excitations felt by the wind turbine system must be identified and characterized. The goal of this research is to develop the wind turbulence input model for horizontal axis wind turbines....
Resource Type:: Dissertation
Full Text:: . F. Tom Lindstrom, Dr. Timothy C. Kennedy, and Dr. Alan Robinson for taking their time to serve on

Identifying the Effects of Combustion Products, Turbulent Fluctuations, and Delivered Energy on Ignition Characteristics of Forced Ignition of Jet-A/air Mixtures

Creator:: Teope, Kaz I.
Abstract:: The operation of gas turbine engines depends on the reliable ignition of fuel/air mixtures. Gas turbine engines are commonly used as commercial and military aviation power plants. However, consistent ignition within gas turbine engines is still a problem, especially for more challenging operating conditions such as emergency operations. This work...
Resource Type:: Dissertation
Full Text:: . Timothy Ombrello, and Dr. Nancy Squires for serving on my graduate committee and providing additional

Mechanics of Nb-Ti superconducting composites

Creator:: Guo, Zhiqiang
Abstract:: Mechanical behavior of Nb-Ti superconducting composites with copper matrices have been studied experimentally and theoretically. Experimental work includes extensive measurements of Cu/Nb-Ti composite system. Techniques for fine fiber testing and composite wire measurement have been developed. Experimental parameters examined in this research include geometry, hardness, Young's modulus, Poisson's ratio, yield...
Resource Type:: Dissertation
Full Text:: Peterson, Timothy C. Kennedy, E. G. Wolff, and Dan Schafer for their kind advices and encouragements as

Residual strength properties of Gr/BMI composite laminates after constant/cyclic compression

Creator:: Shenoy, Krishnananda
Resource Type:: Masters Thesis
Full Text:: would like to thank Dr. Timothy C. Kennedy, Dr. Jun Koike and Dr. Stephen W. Hoag for their time and

On the lyapunov-based approach to robustness bounds

Creator:: Jo, Jang Hyen
Abstract:: The objective of this investigation is the development of improved techniques for the estimation of robustness for dynamic systems with structured uncertainties, a problem which was approached by application of the Lyapunov direct method. This thesis considers the sign properties of the Lyapunov function derivative integrated along finite intervals of...
Resource Type:: Dissertation
Full Text:: committee members, Drs. Eugene F. Fichter, Timothy C. Kennedy and Tom M. West for their advice and

Reduced order modeling of legged locomotion in the horizontal plane

Creator:: Wickramasuriya, Gamika Arun
Abstract:: Sprawled-posture insects exhibit a remarkable ability to rapidly run in a stable manner over complex terrain, a feat that has yet to be equaled by man-made legged robots. Recent experimental results suggest that these insects may employ a hierarchical control structure, in which locomotion performance emerges from a combination of...
Resource Type:: Dissertation
Full Text:: the deviation from a desired operating point β T Dn −β T Ddes =− [ j k ]   vT Dn − vT Ddes δ T

Mechanical characterization of a simple gel in a prototype device that models a degenerative intervertebral disc

Creator:: Cenar, Yannick
Abstract:: A large part of low-back pain occurrences are due to disc herniation or prolapse of the nucleus pulposus. An alternative technique to existing treatments of low back pain includes nucleus pulposus replacement by an artificial material to relieve pain and restore normal function. To date, there has been a deficiency...
Resource Type:: Masters Thesis

Large-strain softening of aluminum in shear at elevated temperature

Creator:: Alhajeri, Saleh N.
Abstract:: Pure aluminum deformed in torsion (shear) at elevated temperatures reaches a broad "peak" stress and then undergoes about a 17% decrease in flow stress with deformation to roughly 1-2 equivalent uniaxial strain. Beyond this strain the flow stress is approximately constant. The sources for this softening are unclear. The suggested...
Resource Type:: Masters Thesis
Full Text:: . Timothy C. Kennedy, Dr. William H. Wames, and Dr. R. Logen Logendran. I appreciate their time investment

Vehicle dynamic validation and analysis from suspension forces

Creator:: Murray, William S.
Abstract:: Several standardized courses for Formula SAE (FSAE) testing are introduced and described with sufficient detail to be reproduced by any Formula SAE team. Basic analysis methods for the courses are given as well as explanations of how those analyses could be used. On-car data from the Global Formula Racing (GFR)...
Resource Type:: Masters Thesis
Full Text:: Appendix I: Body Yaw Moments and Inertia Driving the Asymmetric oval............ 113 Appendix J: Body Yaw

Derivation and automatic generation of Kane's dynamical equations for mechanical manipulators

Creator:: Nie, Tinglin
Abstract:: To design and precisely control a manipulator requires developing an efficient dynamic model of the system. The present work demonstrates how this can be accomplished by employing Kane's dynamical equations. First, a detailed manual derivation of the equations of motion for a particular robot is presented in such way that...
Resource Type:: Dissertation
Full Text:: . Appreciation is also extended to the members of my Ph.D committee, Dr. Robert E. Wilson, Dr. Timothy C

Transient nonlinear deformations of viscoelastic membranes

Creator:: Jenkins, Christopher H. M.
Resource Type:: Dissertation
Full Text:: possible. Thanks are also due to other members of my committee: Dr. Clarence A. Calder, Dr. Timothy C

Numerical study of natural convection in square partitioned and non-partitioned enclosures

Creator:: Sukkaset, Prasart
Abstract:: Heat transfer characteristics and associated temperature and flow fields for natural convection in two-dimensional, square, partitioned and non-partitioned enclosures have been determined for Grashof numbers ranging from 10³ to 10⁶. The vertical side walls of the enclosure are isothermal with all other surfaces assumed to be adiabatic. An adiabatic partition...
Resource Type:: Dissertation
Full Text:: , Professor Charles E. Smith, Professor Timothy C. Kennedy and Professor Harold I. Laursen, for their time

Robust controller design for robotic manipulators with saturation

Creator:: Liang, Zuyang
Abstract:: The development of modern industries calls for the robotic manipulators with high speed and accurate tracking performance. Many authors have paid attention to robust control of robotic manipulators; however, only few authors have also considered the control problem of manipulators with power limitation. In this dissertation, the robotic manipulator is...
Resource Type:: Dissertation
Full Text:: . Charles E. Smith, Prof. Timothy C. Kennedy, Prof. Alan H. Robinson and Prof. David G. Ullman for their

Nonlinear adaptive control of highly maneuverable high performance aircraft

Creator:: Cho, Sul
Abstract:: This thesis presents an effective control design methodology using a one-step-ahead prediction adaptive control law and an adaptive control law based on a Lyapunov function. These control law were applied to a highly maneuverable high performance aircraft, in particular, a modified F/A-18. An adaptive controller is developed to maneuver an...
Resource Type:: Dissertation
Full Text:: my committee members, Dr. W. Kolodziej, Dr. Timothy C. Kennedy, Dr. Robert E. Wilson, and Dr

Processing of laser interferometric signals for small displacement measurements

Creator:: Peng, Gwo-sheng
Abstract:: Algorithms for analyzing laser interferometry signals were developed and adopted to the computer based processing of small displacement measurements. These methods, matrix operation approach and fixed parameters approach, are based on signal phase calculation and are able to replace complex fringe counting electronic circuits. The matrix operation provides an approach...
Resource Type:: Dissertation
Full Text:: . Thomas K. Plant, Dr. Timothy C. Kennedy and Dr. William H. Warnes for reviewing the dissertation and

Drilling process evaluation by predicting drilled hole quality and drill bit wear with on-line acoustic emission signals

Creator:: Wang, Kuang-Jen, 1962-
Abstract:: Improvement of manufacturing productivity is dependent on the successful automation of manufacturing processes, the success of which is based in turn upon the availability of information which describes the state of manufacturing operations. Acoustic Emission (AE) signals related to the cutting process and tool wear have been recently applied to...
Resource Type:: Dissertation
Full Text:: . Smith, Timothy C. Kennedy, and Michael R. Milota, for their interest and support. Thanks are also

Mechanical linkage design for haptic rehabilitation and development of fine motor skills

Creator:: Streng, B. Taylor
Abstract:: Thousands of children and adults suffer from fine motor skill deficits due to developmental disabilities or brain trauma. In order to acquire or reclaim these precision motor movements, occupational therapists work closely with each patient to develop the muscle memory required for completing tasks such as handwriting or drawing. Although...
Resource Type:: Masters Thesis

An investigation of transition from penetration to deflection in the fracture of bi-material interfaces

Creator:: Strom, Joshua L.
Abstract:: The problem of determining whether a crack impinging on an interface will penetrate into the substrate or deflect along the interface is vital to the effective design of layered and composite material systems. Of particular interest is the transition between crack propagation by penetration through an interface and deflection along...
Resource Type:: Masters Thesis
Full Text:: vast collective knowledge. I would also like to thank Dr. Timothy Kennedy, Dr. Jamie Kruzic, and Dr

Evaluating complex engineered systems using complex network representations

Creator:: Haley, Brandon M.
Abstract:: This thesis is the combination of two research publications working toward a unified strategy in which to represent complex engineered systems as complex networks. Current engineered system modeling techniques segment large complex models into multiple groups to be simulated independently. These methods restrict the evaluations of such complex systems as...
Resource Type:: Masters Thesis

Thermal energy recovery from large transformers

Creator:: Yao, Barry
Abstract:: This thesis is concerned with designing and simulating waste energy retrieval systems from large transformers to provide heating and cooling of a control house. The transformer selected is Transformer Bank One at the Ross Substation in the BPA system. The unit is an ASEA 250 MVA transformer with forced oil,...
Resource Type:: Masters Thesis
Full Text:: Pierce and Mr. Timothy Tong in accomplishing this project. TABLE OF CONTENTS I INTRODUCTION 1 II

Search Constraints

Search Results

Limit your search