Index Catalog // ScholarsArchive@OSU

Turbulent Heat Transfer of Supercritical Carbon Dioxide in the Proximity of the Pseudo-Critical Point with Non-Uniform Heat Flux Boundary Conditions

Creator:: Jajja, Saad A.
Abstract:: Seven decades of supercritical heat transfer research have not seen an attempt to characterize turbulent thermal transport in internal flows subject to asymmetric heating. Existing heat transfer models therefore do not account for phenomena that dictates thermal transport, in the proximity of the pseudo-critical point, for non-uniform heating. Additionally, past...
Resource Type:: Dissertation
Full Text:: -Critical Point with Non-Uniform Heat Flux Boundary Conditions Abstract approved: Brian M. Fronk Seven

Experimental investigation of supercritical heat transfer of carbon dioxide in parallel square microchannels with a single-wall constant heat flux boundary condition

Creator:: Zada, Kyle R.
Abstract:: In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
Resource Type:: Masters Thesis
Full Text:: Abstract approved: ______________________________________________________ Brian M. Fronk In

The Feasibility of Process Intensification of the Water-Gas Shift Reaction using Differential Temperature Microreactors

Creator:: Tolley, Thomas E.
Abstract:: Hydrogen is an increasingly attractive low-carbon energy carrier for a variety of stationary and mobile applications. Currently, the vast majority of hydrogen in the United States is produced via the energy intensive steam reforming of natural gas. The cost and carbon emissions associated with hydrogen production can be reduced by...
Resource Type:: Masters Thesis
Full Text:: Microreactors Abstract approved: Brian M. Fronk Hydrogen is an increasingly attractive low-carbon energy

Quantification of total and plastic 3D strain fields within micro-damaged polyurethane foam

Creator:: Sutton, Matthew T.
Abstract:: Local material damage that occurs within cellular solids, such as polymer foams and trabecular bone, and precedes local fractures of the cell struts or walls is called micro-damage. The accumulation of micro-damage within cellular solids is often undesirable, although it is thought to be vital to the development and health...
Resource Type:: Masters Thesis
Full Text:: pursue this degree. • Dr. Brian Bay: for allowing me to work in his lab, funding my work, and

Quantitative comparison of full field strains experimentally measured and analytically predicted for aluminum foams

Creator:: Rutschman, Scott A.
Abstract:: Metallic foams have become widely available and have unique properties that make them attractive for use in a variety of engineering applications. Due to their complex structure, the behavior of foams under complex loading conditions is a subject of continued research. Digital volume correlation is a technique wherein full-field strains...
Resource Type:: Masters Thesis
Full Text:: Brian K. Bay Metallic foams have become widely available and have unique properties that make them

Elastic, plastic, and total strains in human and porcine pedicle trabecular bone and PU-foam after pedicle screw insertion by utilizing functional micro-CT imaging

Creator:: Moran, Sean T.
Abstract:: Pedicle screw breakage and loosening remain as clinical complications of short segment instrumentation procedures for spinal stabilization. This study has directly visualized and measured elastic, plastic and total vertebral pedicle trabecular bone full-field strains in the regions immediately surrounding the pedicle screw during pedicle screw insertion by utilizing functional microCT...
Resource Type:: Masters Thesis
Full Text:: Utilizing Functional Micro-CT Imaging. Abstract approved: Brian K. Bay Pedicle screw breakage and

Functional imaging reveals modest strain concentrations associated with implant micromotion using modified BAK interbody cages

Creator:: Berry, Daniel J.
Abstract:: Interbody fusion cages are increasingly used in the treatment of spinal disease and injury in order to stabilize movement and promote arthrodesis of the vertebral bodies, but the micro-mechanics of the interaction between the cage and the adjacent host bone is not fully understood. This information has bearing on post-surgical...
Resource Type:: Masters Thesis
Full Text:: . Abstract Brian K. Bay Interbody fusion cages are increasingly used in the treatment of spinal disease and

An investigation of the feasibility of a process-intensified differential temperature water-gas shift reactor with integrated Pt/Al2O3 catalyst

Creator:: Hu, Kathy Q.
Abstract:: There has been serious interest in hydrogen as a source of energy in the United States due to its capability of delivering a sustainable, carbon-free energy future. Currently, most hydrogen in the United States is produced via the steam methane reforming of natural gas, which converts methane to hydrogen through...
Resource Type:: Masters Thesis
Full Text:: Integrated Pt/Al2O3 Catalyst Abstract approved: Brian M. Fronk There has been serious interest in hydrogen

Influence of subset size, shape and orientation on texture based digital image correlation

Creator:: Cui, Jianqing
Abstract:: Digital Image Correlation(DIC) is one of full-field strain measurement techniques devel- oped in recent decades, which has been well-demonstrated to conduct the mechanical properties study of solid materials, by collecting data using digital cameras. X-ray to- mography(CT) imaging helps the correlation techniques expanded to three dimensional investigation of materials, known...
Resource Type:: Masters Thesis
Full Text:: (Smith et al., 2002; Verhulp et al., 2006)[11]. 13 (a) Example of Local Minimal Area (b) Example of

A design of a furnace for melting refractory metals using a plasma jet heat source

Creator:: Van Kleeck, Nelson Leeds
Resource Type:: Masters Thesis
Full Text:: Professor Wesley V. Smith and Dr. Roger D. 011eman of Oregon State University, and Mr. Lawrence W. Scammon

Undamped oscillations of air springs

Creator:: Moustafa, Mahmoud Abd-elfattah
Resource Type:: Masters Thesis
Full Text:: appreciation for the help offered by Associato ?rofossor esloy ';. Smith. He also wishes to thank Dr. Louis

A qualitative study of recirculation in cooling towers

Creator:: Riggs, James Lear
Resource Type:: Masters Thesis
Full Text:: Profesr es1ey w. Smith oÎ the flepartnnt Of Mechanical Engineering. He also wishes to thank the other

A quantitative study of recirculation in cooling towers

Creator:: Chiang, Chung
Resource Type:: Masters Thesis
Full Text:: Wesley W. Smith of the Department of Mechanical Engj-neerlng. He also wishes to thank the other members

An object oriented representation for mechanical design based on constraints

Creator:: McGinnis, Brian D.
Abstract:: A representation for the process of mechanical design, along with its computer implementation is presented and discussed. The representation consists of three fundamental concepts: design objects, constraints, and decisions. The design objects are the structures with which the physical artifacts of the design are described. A design object consists of...
Resource Type:: Masters Thesis
Full Text:: based on constraints AN ABSTRACT OF THE THESIS OF Brian D. McGinnis for the degree of Master of

Self-adaptive Subsets for Stretched and Rotated Textures in Digital Image Correlation

Creator:: Gao, Zizhan
Abstract:: Digital image correlation (DIC) uses pairs of images, one in a reference state and one after in situ manipulation of the object, to measure full-field displacements and strains by tracking the motion of small image subsets. Subset selection is always a crucial part of DIC technique as it has a...
Resource Type:: Capstone Project
Full Text:: Student: Zizhan Gao Major Professor: Brian Bay 1 Contents Abstract

Modeling, control, and estimation of flexible, aerodynamic structures

Creator:: Ray, Cody W.
Abstract:: Engineers have long been inspired by nature's flyers. Such animals navigate complex environments gracefully and efficiently by using a variety of evolutionary adaptations for high-performance flight. Biologists have discovered a variety of sensory adaptations that provide flow state feedback and allow flying animals to feel their way through flight. A...
Resource Type:: Dissertation
Full Text:: AN ABSTRACT OF THE DISSERTATION OF Cody W. Ray for the degree

Modeling hop kilning with respect to energy consumption and drying kinetics

Creator:: Thomas, Matthew W.
Abstract:: Currently, little work has been performed studying energy consumption in hop kilning. This thesis explores drying with an alternative drying schedule that extends the initially elevated drying temperature currently used by growers and examines its impact on drying time and energy use. Extending the time of the initially elevated drying...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Matthew W

The fracture toughness of medium density fiberboard and other fiber bridging composites

Creator:: Matsumoto, Noah T.
Abstract:: In many composites, fiber bridging develops as part of the fracture process. Fiber bridging invalidates many toughness evaluation methods such as the ASTM E399 and complicates the identification of crack length, which is a necessary parameter in energy methods. In order to measure the toughness of fiber bridging composites, an...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ John A. Nairn & Brian Bay In many composites, fiber bridging develops as part of the

A Permanent-Magnet Linear Generator Wave Energy Converter for Low Power Ocean Sensors

Creator:: Miles, Lillian F.
Abstract:: Renewable energy sources are becoming increasingly important due to their low environmental impact and limitless nature. This thesis explores the design of a 250 mW permanent magnet linear generator wave energy converter to power ocean sensors. While many wave energy converters exist, this is a unique application because the wave...
Resource Type:: Masters Thesis
Full Text:: . Moum Brian K. Bay Renewable energy sources are becoming increasingly important due to

Experimental Investigation of Near-Critical Carbon Dioxide in Microchannels for High Flux Cooling Applications

Creator:: Travers, Kristen
Abstract:: With the continued decrease in size and subsequent increase in power of computer processors, thermal management in electronics is becoming more important than ever before. The chip heat densities are reaching new peaks (> 100 W cm-2) that current cooling methods are not able to keep up with. However, some...
Resource Type:: Honors College Thesis
Full Text:: :_____________________________________________________ Brian M. Fronk With the continued decrease in size and subsequent increase in power of

Numbering-up of parallel microchannel arrays to megawatt scale supercritical CO₂ solar thermal receivers

Creator:: Hyder, Matthew B.
Abstract:: Concentrated solar power (CSP) plants have the potential to reduce the reliance on nonrenewable energies such as coal and natural gas and provide 24 hour, renewable electricity. A CSP system consists of a large field of heliostats that concentrate the sunlight on a centralized receiver, in this receiver a working...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ Brian M. Fronk Concentrated solar power (CSP) plants have the potential to reduce the

Process Physics, Strategies and Economics in Metal Additive Manufacturing and Digital Microstructural Control for Energy and Chemical Process Components

Creator:: Manoharan, Sriram
Abstract:: Advances in plant construction within the energy and chemical process industries require inexpensive process intensification (PI) technology as a means to reduce plant size for enabling modular construction. One form of PI is microchannel process technology where arrays of microchannels, having hydraulic diameters on the order of 0.1 to 1...
Resource Type:: Dissertation
Full Text:: : ______________________________________________________ Brian K. Paul Advances in plant construction within the energy and chemical process

On the Role of Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel

Creator:: Coe, Hannah G.
Abstract:: Selective laser melting (SLM) is an additive manufacturing (AM) process that uses a laser beam to melt metal powder as it is spread onto the build surface using a roller or scraper, followed by rapid solidification to manufacture a 3D component, one layer at a time. In SLM process, density...
Resource Type:: Masters Thesis
Full Text:: Tucker, Dr. Brian Paul, and Dr. Brian Woods for your time, patience, and feedback My deepest thanks

Numerical and Experimental Evaluation of Membrane Based Energy Recovery Ventilator Performance with an Internal Support Structure

Creator:: Armatis, Paul D.
Abstract:: Large amounts of energy are wasted when conditioned air in buildings is exhausted to meet ventilation requirements. There are several technologies to recover some of this energy, including the recent development of membrane based energy recovery ventilators (ERVs). ERVs exchange sensible heat and moisture between incoming fresh and outgoing exhaust...
Resource Type:: Masters Thesis
Full Text:: with an Internal Support Structure Abstract Approved: Brian M. Fronk Large amounts of

Characterization and Prediction of Reactive Forces for Compressed 3D Printed Hyperelastic Lattice Structures

Creator:: So, David M.
Abstract:: In order to generate practical ways to easily design functional flexible lattice structures, this research seeks to find a way to predict reactive forces of compressed hyperelastic cubic lattice structures. Using 3D printed test coupons, material data was collected for use in finite element analysis. Cubic lattice structures with varying...
Resource Type:: Honors College Thesis
Full Text:: :_____________________________________________________ Brian Paul In order to generate practical ways to easily design functional flexible

Manufacturing Process Design for a Stamped Microchannel High-Temperature Recuperator

Creator:: Song, Chuankai
Abstract:: Microchannel high temperature recuperators have the advantage of higher heat transfer coefficients and lower size and weight than traditional high temperature recuperators. However, the industrial application of microchannel recuperators are restricted by the high cost of photochemical machining and diffusion bonding. The objective of this paper is to introduce a...
Resource Type:: Masters Thesis
Full Text:: approved: ______________________________________________________ Brian K. Paul Microchannel

Usage of Digital Image Correlation in Single and Multiple Stereo Systems for Strain and Shape Measurement

Creator:: McKinley, Timothy A.
Abstract:: This dissertation details the application of digital image correlation (DIC) in novel methods for mechanical testing and shape characterization. The first usage manifested in the development of a novel composite test specimen that provided the ability to characterize the matrix compression energy release rate at initiation and subsequent crack propagation....
Resource Type:: Dissertation
Full Text:: Measurement Abstract approved: ______________________________________________________ Brian K

Investigation of In-tube Non-equilibrium Condensation of Low Global Warming Potential Refrigerants

Creator:: Jacob, Tabeel A.
Abstract:: This work investigates the in-tube condensation of low global warming potential (GWP) zeotropic refrigerant mixtures R448A, R450A, R452A, R454B and R454C. These refrigerants have been proposed for a wide range of commercial heating, ventilation, air-conditioning applications, but their heat and momentum transport phenomenon were not well understood. Thus, in this...
Resource Type:: Dissertation
Full Text:: approved: Brian M. Fronk This work investigates the in-tube condensation of low global warming potential

Evaluation of the predictive capability of two-phase flow maps for microchannel condensation of R-134a at low mass flux conditions

Creator:: VanderPutten, Michael A.
Abstract:: Predicting condensation flow regimes and the associated heat transfer and pressure drop in microchannels is critical for designing terrestrial and space systems for heating, cooling, power generation, and advanced manufacturing. It is well established that in flows approaching the microscale (Dh < 1 mm) gravity-dominated flow regimes become less relevant,...
Resource Type:: Masters Thesis
Full Text:: : ________________________________________________________________ Brian M. Fronk Predicting condensation flow regimes and the associated heat transfer

Investigation of Seasonal Performance of a Membrane Heat Pump System in Different Climate Regions

Creator:: Bukshaisha, Ahmad A.
Abstract:: Membrane based heat pumps systems have attracted the attention of many research groups as a potentially more environmentally friendly alternative to vapor compression systems that are being used for space cooling in 90\% of the buildings in the United States. Several prototypes systems have been developed, with reported claims of...
Resource Type:: Masters Thesis
Full Text:: approved: Brian M. Fronk Membrane based heat pumps systems have attracted the attention of many re

Potential of Genetic Algorithms for Design of Liquid Cooled Heat Sinks Fabricated Using Additive Manufacturing

Creator:: Dokken, Connor B.
Abstract:: The advancement of new manufacturing techniques such as additive manufacturing enable significantly greater freedom of design compared to conventional techniques. Of significant interest is what improvements could be made in the design of cold plates and heat sinks for electronics cooling. Greater design freedom could potentially enable new designs that...
Resource Type:: Masters Thesis
Full Text:: Brian M. Fronk The advancement of new manufacturing techniques such as additive manufacturing

Investigation of Destratification in Warehouses

Creator:: Polander, Michael D.
Abstract:: A significant source of energy consumption comes from maintaining desired indoor environment conditions in warehouses and other industrial facilities. In efforts to combat the raising energy costs, studies into more efficient heating and cooling strategies has been a topic of consideration for a number of years. One of the areas...
Resource Type:: Masters Thesis
Full Text:: of Destratification in Warehouses Abstract approved: Brian M. Fronk A significant source of energy

Part-Load Optimization of an Organic Rankine Cycle

Creator:: Ramsey, Owen
Abstract:: Waste-heat-recovery Organic Rankine Cycle (ORC) systems use excess heat from industrial processes to produce electrical power. In many cases, the temperatures and mass flow rates of these excess-heat streams vary significantly over time, causing the ORC to often operate far from its design point. In this study, a control strategy...
Resource Type:: Honors College Thesis
Full Text:: approved:_____________________________________________________ Brian Fronk Waste-heat-recovery

Impacts of Porous Support Geometry on Membrane Performance and Energy Use in the Steam Reforming Process

Creator:: Chamorro, Davis S.
Abstract:: Increasing interest in hydrogen as a clean and efficient energy carrier has driven the need to improve its production and distribution methods. Of particular interest is the natural gas reforming process which currently accounts for 48% of hydrogen production in the United States. Existing natural gas delivery infrastructure and challenges...
Resource Type:: Masters Thesis
Full Text:: Abstract approved: _____________________________________________________ Brian M. Fronk

Achilles Assistance Device as a Passive Ankle Foot Orthosis for Achilles Tendon Injuries

Creator:: Gonnerman, Evan J.
Abstract:: An Achilles tendon injury can be devastating. Surgical methods to bring the muscle to full strength are not always available. Proposed is an ankle foot orthosis (AFO) that is entirely passive (does not add energy to the system) and uses the mechanical advantages provided by the walking gait of a...
Resource Type:: Honors College Thesis
Full Text:: :_____________________________________________________ Brian Bay Abstract—An Achilles tendon injury can be devastating. Surgical methods to

Condensation of a zeotropic mixture, R-454C, and its individual components, R-1234yf and R-32, in microfin tubes

Creator:: Matty, Ethan P.
Abstract:: This work compares the condensation heat transfer and pressure drop for zeotropic refrigerant R-454C and its individual components, R-32 and R-1234yf, in horizontal microfin tubes. One microfin tube has a 4 mm outer diameter, 0.18 mm wall thickness, and a surface area ratio of 1.56. The second tube has a...
Resource Type:: Masters Thesis
Full Text:: Abstract approved: Brian M. Fronk This work compares the condensation heat transfer and pressure drop for

Mechanical characterization of a simple gel in a prototype device that models a degenerative intervertebral disc

Creator:: Cenar, Yannick
Abstract:: A large part of low-back pain occurrences are due to disc herniation or prolapse of the nucleus pulposus. An alternative technique to existing treatments of low back pain includes nucleus pulposus replacement by an artificial material to relieve pain and restore normal function. To date, there has been a deficiency...
Resource Type:: Masters Thesis
Full Text:: Intervertebral Disc. Abstract approved: Brian K. Bay A large part of low-back pain occurrences

In-Situ Stereo Vision Metrology for Metal Powder Bed Fusion Additive Manufacturing

Creator:: Mosher, Daniel P.
Abstract:: Powder Bed Fusion (PBF) techniques are additive manufacturing (AM) technologies with paradigm-shifting potential for the production industry. However, before they can become viable production solutions for quality critical industries, issues with process consistency and repeatability need to be addressed. There is a need for in-situ sensing systems that characterize process...
Resource Type:: Dissertation
Full Text:: . Abstract approved: ______________________________________________________________________ Brian K. Bay

An experimental approach to analyze large notched composite panels loaded in out-of-plane shear

Creator:: Froemming, Tyler M.
Abstract:: Identifying material characteristics of composites is important in designing any structural system. The aerospace industry relies on these material properties not only to design a functional aircraft, but also a safe and reliable one. Since carbon fiber composites are relatively new materials, little is known about its characteristics under certain...
Resource Type:: Masters Thesis
Full Text:: : _______________________________________________________________________ Brian K. Bay Identifying material characteristics of composites is important in

Race Car Monocoque Design? A Loaded Question Suspension Kinematics, Loads & Sandwich Panel Optimization Methodologies

Creator:: Gray, Gabriel M.
Abstract:: As designers continue to develop the ability to improve a component or system design relative to any number of metrics, priorities and objectives, the need for advanced methodologies which focus efforts and steer design decisions to best meet the needs of the organization becomes increasingly important. This work develops such...
Resource Type:: Masters Thesis
Full Text:: nor include aerodynamic downforce and drag in these discussions. Sam Smith [11] presents a

Lift Enhancement of Pliant Wings Through Bio-Mimicry

Creator:: Osterberg, Nathaniel Brent
Abstract:: Flexible aerodynamic surfaces have been shown to favorably influence flight characteristics at low Reynolds numbers by increasing lift, angle of attack at stall, and resistance to perturbation. The objective of the research presented within this thesis is to investigate the influence of two aspects of flight observed in biological flyers,...
Resource Type:: Masters Thesis
Full Text:: adviser Dr. Roberto Albertani and my com- mittee members Dr. Nancy Squires and Dr. Brian Bay. Throughout

Application of digital image correlation in material parameter estimation and vibration analysis of carbon fiber composite and aluminum plates

Creator:: Chuang, Chih-Lan Jasmine
Abstract:: Identifying material parameters in composite plates is a necessary first step in a variety of structural applications. For example, understanding the material parameters of carbon fiber composite is important in investigating sensor and actuator placement on micro-air-vehicle wings for control and wing morphing purposes. Knowing the material parameters can also...
Resource Type:: Masters Thesis
Full Text:: Equation 3.1, ρ is the density of the plate, h is the thickness of the plate, w is the out-of-plane

Pure torsion of a slotted channel member

Creator:: Benedetti, Gerald Andrew
Resource Type:: Masters Thesis
Full Text:: . Smith, for his assistance and advice throughout this investiga tion. TABLE OF CONTENTS Page I

Design, construction and testing of torsiograph

Creator:: Hamann, David Eugene
Abstract:: The crankshaft of an internal combustion engine experiences torsional vibrations which become critical at certain running speeds and can cause overstressing in the crankshaft, leading to failure in some cases. The object of this study was to design, construct and test an instrument to measure these oscillations at one point...
Resource Type:: Masters Thesis
Full Text:: for Privacy Charleg-r. Smith The crankshaft of an internal combustion engine experiences torsional

Vibrations of suspended cables

Creator:: Gale, John Gregg
Abstract:: The equations of motion of an elastic cable suspended in a viscous medium from two arbitrary points are derived. These are then linearized for the undamped, inextensible case, and it is found that the equations describing the in-plane motion of the cable are then independent of the equation describing the...
Resource Type:: Dissertation
Full Text:: . Smith The equations of motion of an elastic cable suspended in a viscous medium from two arbitrary

Dynamics and control of a rigid/flexible manipulator

Creator:: Yeh, Chun-tien
Abstract:: Control of high-speed, light-weight robotic manipulators is a challenge because of their special dynamic characteristics. In this work, a two-stage control algorithm for the position control of flexible manipulators is proposed. First, the more complex, flexible robot system is replaced by a simplified hypothetical rigid body system (HRRA) with off-line...
Resource Type:: Dissertation
Full Text:: . Redacted for Privacy Abstract approved: Charles E. Smith Control of high-speed, light-weight robotic

Derivation and automatic generation of Kane's dynamical equations for mechanical manipulators

Creator:: Nie, Tinglin
Abstract:: To design and precisely control a manipulator requires developing an efficient dynamic model of the system. The present work demonstrates how this can be accomplished by employing Kane's dynamical equations. First, a detailed manual derivation of the equations of motion for a particular robot is presented in such way that...
Resource Type:: Dissertation
Full Text:: privacy Cilailes E. Smith To design and precisely control a manipulator requires developing an efficient

A model reference adaptive system for control of a flexible mechanical manipulator

Creator:: Lee, Byeung Kyun
Abstract:: For control of a flexible manipulator, the assumed- mode method is applied to the mathematical model of the model reference adaptive system. In the assumed-mode method, the flexible, continuous manipulator is described by a limited number of degrees of freedom. A modified model reference adaptive system is studied for direct...
Resource Type:: Dissertation
Full Text:: . Smith For control of a flexible manipulator, the as- sumed-mode method is applied to the mathematical

Rebound predictions of mechanical collisions

Creator:: Lai, Liang-Ju
Abstract:: Predictions of mechanical collisions between two bodies frequently cannot be completed by the impulse-momentum equation together with a complete description of the motion of the system at the initial contact. Additional account must be taken of the deformations and frictional interaction induced by the impulsive reaction force, where the bodies...
Resource Type:: Dissertation
Full Text:: : Charles E. Smith Predictions of mechanical collisions between two bodies frequently cannot be

Parameters affecting mechanical collisions

Creator:: Aum, Ho Sung
Abstract:: Even though the elastic deformations that occur during the impact of colliding bodies may be small in comparison to their actual dimensions, they play an important role in mechanical collisions. During the time the bodies are in contact, elastic, friction, and inertia properties combine to produce a complex variation of...
Resource Type:: Dissertation
Full Text:: . Smith Even though the elastic deformations that occur during the impact of colliding bodies may be

Search Constraints

Search Results

Limit your search