Index Catalog // ScholarsArchive@OSU

The Art and Craft of John Williams

Creator:: Lincoln, Danae A.
Abstract:: The intent of this paper is to bring more attention to the mastery involved with film composition as an art form. The research focuses specifically on the life, style, influences, and works of John Williams as a conductor, film composer, and composer. It addresses his biography, filmography, and working relationships,...
Resource Type:: Honors College Thesis
Full Text:: THESIS OF Danae A. Lincoln for the degree of Honors Baccalaureate of Science in Mechanical

Design of a Gas Engine Muffler

Creator:: Farnsworth, William Yates
Abstract:: Simple as may seem. the subject, "A gas engine muffler," to the reader on first thought, if he will but take time to consider the importance of such a device in connection with the operation of internal combustion engines, he will probably come to the conclusion that it is not...
Resource Type:: Undergraduate Thesis
Full Text:: Design of a gas engine muffler T H E S I S on DESIGN

Evaluation of copper to superconductor area ratio measurement techniques for niobium-titanium composite superconducting wire

Creator:: Pyon, Taeyoung
Abstract:: Measurement of the copper to superconductor ratio (Cu/SC) in composite superconducting wires is necessary for process control, quality assurance, and characterization of the final wire properties. A comparison has been made of three techniques for measuring the Cu/SC ratio on a set of commercial wires produced for the Superconducting SuperCollider...
Resource Type:: Masters Thesis
Full Text:: Composite Superconducting Wire Redacted for Privacy Abstract approved : William H. Warnes Measurement of

Properties of a niobium-titanium multilayer thin film

Creator:: Norris, Jeffrey A., (Jeffrey Alan), 1965-
Resource Type:: Masters Thesis
Full Text:: a Niobium-Titanium Multi layer Thin Film. Abstract approved: William H. Warnes A multilayer thin

Development of a control system for a walking machine leg

Creator:: Thompson, Eric William
Abstract:: This thesis presents a control system for a walking machine leg. The leg is representative of one of the six legs required for a proposed walking machine based on the geometry of the darkling beetle. Each of the three joints is controlled by a DC servo motor mounted to the...
Resource Type:: Masters Thesis
Full Text:: All Rights Reserved Development of a Control System for a Walking Machine Leg by Eric William

Dynamic modeling of a refrigerant boiler for power applications

Creator:: Curry, Thomas Haitsch
Abstract:: A dynamic model of a refrigerant boiler has been produced by the use of distributed parameter modeling techniques. A number of elementary cases were studied and were used as an aid in the final model formulation. Modeling using distributed parameters employed the use of mesh equations which were then reorganized...
Resource Type:: Masters Thesis
Full Text:: Dynamic modeling of a refrigerant boiler for power

NOx emissions for a gas turbine as a function of fuel-bound nitrogen and other variables

Creator:: Faye, William C.
Abstract:: Emissions of oxides of nitrogen from a small (15 kW) turbine generator burning high fuel bound nitrogen fuels were measured by a chemiluminescence method. Kerosene was used as the base fuel and pyridine was added to achieve different fuel bound nitrogen levels. Mixtures of 0.0%, 0.5%, and 1.0% (by weight)...
Resource Type:: Masters Thesis
Full Text:: William Faye A THESIS submitted to Oregon State University February 22 ,1982 in partial fulfillment

A numerical analysis of ice fog produced by automobiles

Creator:: Nelson, William George
Abstract:: A model of an exhaust plume was developed and programmed on a digital computer. The purpose of the model was to predict the concentration and size distribution of ice particles produced from automobile exhaust during arctic conditions. The model accounted for the nucleation, growth, and freezing of the condensed water...
Resource Type:: Dissertation
Full Text:: Fog Produced by Automobiles by William George Nelson A THESIS submitted to Oregon State

Tentative equilibrium diagram for the nickel-rich end of the nickel-zirconium system

Creator:: Armstrong, Asa William
Resource Type:: Dissertation
Full Text:: -ZIRCONIUM SYSTEM by ASA WILLIAM ARMSTRONG A TIESIS submitted to OREGON STATE COLLEGE in partial

Computational modeling of a diffusion bonded microchannel under high pressure and temperature

Creator:: Pratte, William
Abstract:: Diffusion bonded microchannels provide significant benefits by reducing space requirements while improving thermal efficiency when used in heat exchangers. In particular, these microchannels have potential to improve efficiencies for combining concentrated solar power with supercritical CO2 Brayton cycles, where structures operate at high temperatures (760 ˚C) and high pressures (25...
Resource Type:: Masters Thesis

ScholarsArchive@OSU

The Art and Craft of John Williams

Design of a Gas Engine Muffler

Evaluation of copper to superconductor area ratio measurement techniques for niobium-titanium composite superconducting wire

Properties of a niobium-titanium multilayer thin film

Development of a control system for a walking machine leg

Dynamic modeling of a refrigerant boiler for power applications

NOx emissions for a gas turbine as a function of fuel-bound nitrogen and other variables

A numerical analysis of ice fog produced by automobiles

Tentative equilibrium diagram for the nickel-rich end of the nickel-zirconium system

Computational modeling of a diffusion bonded microchannel under high pressure and temperature

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search