Index Catalog // ScholarsArchive@OSU

Evaluation of Materials for Use in Open-Cycle Magnetohydrodynamic Power Generation

Creator:: Bowen, Michael S.
Abstract:: Recent interest in oxy-fuel combustion for carbon capture, as well as advancements in technologies such as magnetics, materials, and computational modeling has sparked renewed interest in magnetohydrodynamic (MHD) power generation. The increased temperatures of oxy-fuel combustion versus air-fuel combustion poses a challenge in the selection of materials for plasma exposed...
Resource Type:: Masters Thesis
Full Text:: interpreting results collected in Chapter 2. Richard Chinn (NETL) performed x-ray diffraction measurements

An Improved Chemical Kinetic Model Reduction in pyMARS for Liquid Propellants

Creator:: Moore, Cailin J.
Abstract:: The aerospace industry uses chemical kinetic models when designing propulsion systems to acquire specific details about the rate of chemical reactions, heat release, and combustion stability. These models, however, are too large and stiff to be useful as they can take weeks to run computations on. The pyMARS python package...
Resource Type:: Honors College Thesis
Full Text:: ://www.britannica.com/science/chemical-kinetics https://www.britannica.com/science/chemical-kinetics https://doi.org

Thermal annealing of Mo/Si multilayers to assess the stability relevant to soft x-ray projection lithography

Creator:: Viliardos, Michael A.
Resource Type:: Masters Thesis
Full Text:: Multilayers to Assess the Stablity Relevant to Soft X-ray Projection Lithography. Abstract approved: Michael

Computational Modeling of Smoldering Combustion in Wildland Fuels

Creator:: Jayasuriya, Waduge Jayani A.
Abstract:: Smoldering combustion in wildland fires is a critical phenomenon that needs in-depth study because it can initiate with weaker ignition sources, can persist for long periods, is difficult to suppress, and can transit to flaming combustion. Cellulose, hemicellulose, and lignin are the major organic constituents within biomass, in varying proportions...
Resource Type:: Dissertation
Full Text:: "x" is for one test with this content at 220 kg/m3

Ignition of Fuel Beds by Firebrands

Creator:: Bean, Derek R.
Abstract:: The severity of wildfires around the globe is increasing. At the same time, urban development is expanding outward into areas where severe fires occur. There is an increased risk of home loss to fires in areas where severe fires and urban expansion meet. Ignition of homes or nearby fuel is...
Resource Type:: Dissertation
Full Text:: are contained in Chap- ter 4. Frontiers in Mechanical Engineering Vol. 7, 1-11, 2021. https://doi.org

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Creator:: Yan, Dongqing
Abstract:: A nickel-based Hastelloy C22 powder with a nominal composition of Ni-21.30Cr-13.36Mo-1.92Co-2.94W-3.85Fe-0.23Mn-0.3V(wt%) and particle size distribution of D₁₀=23.8±0.3 μm, D₅₀=37.5±0.2μm, and D₉₀=59.3±1.1 μm was gas atomized to be used as a feedstock in Laser Powder Bed Fusion (LPBF). In this study, laser power and scanning speed were optimized to manufacture specimens...
Resource Type:: Masters Thesis
Full Text:: review, Int. J. Adv. Manuf. Technol. 67 (2013) 1191–1203. https://doi.org/10.1007/s00170-012-4558-5

Design for Clean Technology Adoption: Application of Discrete Choice Analysis and the Theory of Planned Behavior for Development Engineering

Creator:: Pakravan, Mohammad H.
Abstract:: Clean technologies can address multiple challenges associated with climate change, environmental protection, and human health. However, the impact desired by introduction of such technologies is achievable only if new options effectively replace inefficient, conventional practices. This ‘design for adoption’ requires understanding of user motivations, associated beliefs, context of use, and...
Resource Type:: Dissertation

Simulating Soot Formation and Growth using a Parallel Coupled Monte Carlo Method

Creator:: Peters, Jordan
Abstract:: Small hydrocarbon particles such as soot and soot precursors pose a serious threat to human health and Earth's climate. Understanding the mechanisms by which soot particles form and grow is the first step to reducing the prevalence of these particles. Computational simulations are used to investigate combusting systems which are...
Resource Type:: Masters Thesis

Soot Modeling: GPU Accelerated Direct Simulation Monte Carlo

Creator:: Lorson, Paige
Abstract:: For this project, we designed a soot modeling software to produce a full particle density function. This model uses the Direct Simulation Monte Carlo with a full conditioning particle selection method to capture soot nucleation and coagulation in a diffusion flame. We investigate the use of graphic processing units as...
Resource Type:: Capstone Project
Full Text:: , pp. 689–697. isbn: 978-0-387-09766- 4. doi: 10.1007/978-0-387-09766-4_2. url: https://doi.org

Fluid dynamic analysis of fluid flow in a raceway tank for cultivation of macrophytic red algae, Gracilaria vermiculophylla

Creator:: Willis, Myles
Abstract:: As new cost-effective cultivation methods are needed for macrophytic red algae, this experiment expands upon a previously studied land-based approach. The experiment aimed to determine how the fluid dynamics of a previously researched land-based method affected the growth of the macrophytic red alga, Gracilaria Vermiculophylla. A clonal culture of G....
Resource Type:: Honors College Thesis
Full Text:: , Heidelberg. (2012) 471-493, https://doi.org/10.1007/978-3-642-28451-9_22 https://doi.org/10.3389/fmars

ScholarsArchive@OSU

Evaluation of Materials for Use in Open-Cycle Magnetohydrodynamic Power Generation

An Improved Chemical Kinetic Model Reduction in pyMARS for Liquid Propellants

Thermal annealing of Mo/Si multilayers to assess the stability relevant to soft x-ray projection lithography

Computational Modeling of Smoldering Combustion in Wildland Fuels

Ignition of Fuel Beds by Firebrands

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Design for Clean Technology Adoption: Application of Discrete Choice Analysis and the Theory of Planned Behavior for Development Engineering

Simulating Soot Formation and Growth using a Parallel Coupled Monte Carlo Method

Soot Modeling: GPU Accelerated Direct Simulation Monte Carlo

Fluid dynamic analysis of fluid flow in a raceway tank for cultivation of macrophytic red algae, Gracilaria vermiculophylla

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search