Medical Isotopes are a necessity in modern medicine for cancer treatments and medical imaging. In order to ensure that the needs and demands are met for the medical procedures, facilities are put in place to produce these isotopes. There are over 25 different isotopes of interest being produced by more...
This project was a proof of concept of the use of the RAVEN software, a tool developed for the Risk Informed Safety Margin Characterization (RISMC) approach, with RELAP5-3D. This novel approach combines older probabilistic and mechanistic approaches to look at how and why the complex systems of a nuclear power...
The purpose of this thesis is to design a robust test facility for a small space nuclear power system and model its physical behavior under different scenarios. The test facility will be used to simulate a 1-10kWe nuclear reactor, its electrical generation, and heat removal capabilities. This simulator will be...
The United States nuclear industry is under
significant public pressure to close the nuclear fuel
cycle. Closing the fuel cycle will require that nuclear
waste, fission products and transuranics, except plutonium
(actinides), be disposed of by permanent burial. The
actinides can be buried with the fission products, but this
will...
Nuclear Thermal Rocket (NTR) designs have received renewed interest due to their superior thermal efficiencies and a rehabilitated desire for space exploration. This has resulted in improved NTR fuel designs that have unique properties that require investigation and testing in order to be more safely designed and operated.
Oak Ridge...
Lattice bum-up calculations in thermal reactors are complicated by the necessity
for use of transport theory to represent fuel rods, control rods, and burnable absorbers,
by many time-dependent variables which must be considered in the analysis, and by
geometric complexity which introduces time-dependent, spatial-spectral variations.
Representation of lattice structure in...
Safety concerns at the Hanford Reservation require a way to measure the
moisture content of material contained in the high level radioactive waste tanks. The
freezing of material next to a probe was proposed by scientists at Pacific Northwest
Laboratories (PNL) as one approach to solve this problem. It was...
Five Ultra light Fabric Reflux Tubes (UFRTs) were tested in a thermal vacuum chamber at the National Aeronautics and Space Administration's Johnson Space Center in September 1994. These test articles were design and fabricated by staff at the Pacific Northwest Laboratory, operated by Battelle Memorial Institute for the United States...
A rotating, flat plate condensation experiment has been developed to
investigate the heat of the Rotating Bubble Membrane Radiator (RBMR). The
RBMR is a proposed heat rejection system for space applications which uses
working fluid condensation on the inside surface of a rotating sphere to
reject heat to space. The...