In this project we measure the neutron capture cross section of ²⁰⁸Pb. We began by calibrating our silicon detector with ²⁰⁴Tl. Two experiments were then performed, the first in December of 1999 and the second in March of 2000. Both experiments were performed in the nuclear reactor of the Radiation...
This project calculates the value of β for ice particles based on wavelength dependent values of their refractive and absorptive indices. β is the ratio of the force due to radiation to the force due to gravity acting on a particle in the solar system. This parameter can later be...
The optical characterization of transparent conductive thin films is demonstrated. The basics of transparency and conductivity, as they relate to transparent conductor research, are explained. A functional model of the reflectance and transmittance of a sample film, including interference fringes, is derived from the Fresnel electric field amplitude coefficients. The...
One method of fabricating intermetallic nickel-aluminum MECS devices involves diffusion bonding together pre-patterned elemental foils of nickel and aluminum. This process shows good potential for the mass-production of NiAl devices, but several quality issues remain. Of large concern is the deformation of internal features during the bonding process. This research...
A series of seven magnesium-doped copper scandium oxide films were made by radio frequency sputtering, and intercalated at various oxygen pressures to create different oxygen concentrations in each film. The objectives of this study were to verify the p-type nature of these transparent conductive thin films, to determine the correlation...
When a nucleus is in an excited state, it will decay to lower energy by emitting photons. Often there are several intermediate stages in a decay cascade. Occasionally the photons in a cascade will be emitted in coincidence. This will be resolved by the detector not as two distinct photons,...
Impedance spectroscopy is a method of modeling materials with equivalent circuits to determine electrical properties, such as the resistivity and the dielectric constant. We explore impedance spectroscopy, both theoretically and experimentally through applying the method to samples of BaCuS1-xSexF. Grain boundary effects were dominant in the results, and although they...
We consider development of sand ripples in shallow water flows which do not reach an equilibrium height but have a time-varying ripple height that slowly reaches a maximum value and then is quickly destroyed by the fluid. A simple scenario to explain the time periodic behavior of the sand ripples...
The large population of 2r>100m near earth objects (NEOs) presents a certain hazard to life on earth. It has been proposed that a nuclear device may be used to alter the course of such objects, thereby averting a catastrophic collision with the earth. The asteroid interdiction problem includes a number...
The LIGO interferometers have reached their designed sensitivity level which is greater than any other interferometer ever built. At this point, it is important to have a proper understanding of small perturbations that might still exist (until now these issues did not come to the forefront because other more critical...