Since 2004 there have been multiple devastating tsunamis around the globe triggered by large magnitude earthquakes; with the most recent being the Tohoku, Japan tsunami in March 2011. These tsunamis have caused significant loss of life and damage to the coastal communities impacted by these powerful waves. The resulting devastation...
There are over 130 million wood poles supporting electrical transmission and distribution lines in the U.S. The vast majority of these poles are preservative treated to prolong their useful life. In some cases, however, the depth of treatment is relatively shallow, leaving a deep zone of moderately durable, untreated heartwood....
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
The purpose of this thesis was to evaluate orthogonal cutting as a method to determine the fracture toughness of low and high density polyethylene and wood plastic composites. A test fixture was developed to capture normal and tangential cutting forces at variable depth and rake angle. A tool interface method...
The goal of this study was to optimize a through-boring pattern that will provide adequate preservative penetration while minimizing the reduction in overall pole bending strength. Hole spacing was developed using longitudinal and transverse chemical penetration data from previous studies. Finite element analysis was used as a preliminary assessment tool...
Timber engineering is currently in the midst of a significant evolution due to the rise of mass timber products, like cross-laminated timber (CLT). Increasing numbers of structural engineers are facing the challenge of designing lateral-force-resisting systems (LFRS) for multistory CLT structures. LFRS solutions such as steel frames, concrete cores, or...
Heavy timber framing relies primarily on bracing to withstand lateral loads due to earthquakes and wind events. Bracing configurations in heavy timber framed buildings vary widely and include cross bracing, knee bracing, and other geometries. Many heavy timber frames constructed during colonial American times are still standing, exceeding the expected...
Sandwich composites are typically produced from two high strength facings bonded to a lower strength, lightweight core. Sandwich design has proven to be efficient for applications demanding high strength and low weight. Wood-based sandwich composites have been largely limited to non-structural applications with the exception of structural insulated panels and...
Accelerated weathering (AW) tests have become a requirement for many wood composite products. This project monitored temperature and moisture content of specimens undergoing AW exposure for the following standards: ASTM D3434 (automatic boil test), CSA O112.9 (boil-dry-freeze), and PS2 (Section 7.17, 6-cycle VPS). Each AW procedure was conducted with three...
One of the recent additions to the panoply of engineered wood products is cross-laminated timber (CLT). CLT is a prefabricated, large-scale, solid wood panel that consists of multiple layers of lumbers stacked together, with each layer arranged perpendicular to the next layer, glued with structural grade adhesives, and pressed. The...