Wood-based composites such as plywood and particleboard are produced with a thermoset adhesive via a hot-press process. At present, UF is the most commonly used thermoset adhesive for production of decorative plywood. The emission of the carcinogenic formaldehyde from UF-bonded panels during the use of panels affects the indoor air...
Presently, the production of wood composites relies on the formaldehyde-based wood adhesives such as phenol-formaldehyde (PF) and urea-formaldehyde (UF). However, their dependence on exhaustible fossil fuels and the emission of carcinogenic formaldehyde prompt to develop an environmentally friendly adhesive from renewable natural resources. This work focuses on development and characterization...
Natural fibers are gaining popularity as reinforcement materials for thermoset resins over the last two decades. Natural fibers are inexpensive, abundant, renewable and environmentally friendly. Kenaf fibers are one of the natural fibers that can potentially be used for reinforcing unsaturated polyester (UPE). As a polymer matrix, UPE enjoys a...
:
_____________________________________________________________________
KaichangLi
Natural fibers are gaining popularity as reinforcement materials for
In wood-plastic composites (WPCs) a compatibilizer is often used to improve
the interfacial adhesion between the hydrophilic wood filler and the hydrophobic
plastic matrix. At present, while the basic concepts of compatibilization are
understood, the optimized chemical structures of an effective compatibilizer, including
the ideal structures of the wood-binding domain...
Rubber without reinforcement has limited applications. The strength of reinforced rubber composites can be ten times stronger than that of unreinforced rubbers. Therefore, rubber composites are widely used in various applications ranging from automobile tires to seals, valves, and gaskets because of their excellent mechanical elastic properties. Silica and carbon...
Wood-plastic composites (WPCs) are one of the fastest-growing sectors of the
wood composites industry. However, the strengths of WPCs are typically low
because of the poor interfacial adhesion between hydrophilic wood and
hydrophobic thermoplastics. A compatibilizer that can form bridges between wood
and plastics is required to give WPCs desirable...
Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
Further enhancement of energy generation is desired for practical application of anaerobic microbial systems such as microbial fuel cells (MFC) and anaerobic digesters (AD). A possible approach is to enhance the ability of microbial communities to transfer electron extracellularly in the form of electrical current. Critical to perform direct extracellular...
Porous carbon is indispensable in modern technology applications. It is used for energy storage, gas separation, water purification, catalyst support, and chromatography. The diversity of its applications stems from its unique properties, including high specific surface area, tunable pore volume, and chemical stability. Specifically, the large surface area provides high...
Recent advances in nanocrystalline materials production are expected to impact the development of next generation low-cost and/or high efficiency solar cells. For example, semiconductor nanocrystal inks are used to lower the fabrication cost of the absorber layers of the solar cells. In addition, some quantum confined nanocrystals display electron-hole pair...