Elasticity properties of wood studs are essential inputs for
the structural analysis of wood-stud wall systems.
A theoretical procedure was developed to determine the probability
distributions for the deflection-load relations of stud samples.
The procedure is based on the finite element analysis and a Monte-
Carlo type simulation and accounts...
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
Fungi are the primary biological agents of wood deterioration and cause major economic losses of wood products globally. Wood in outdoor applications tends to remain wet for extended time periods, making it susceptible to fungal attack. Understanding the factors involved in fungal colonization of wood is important for developing improved...
The mechanical performance of composite materials is determined by the mechanical properties of their individual components and the effective load transfer between these components. Binders are commonly used to bond composite components together and to provide effective load transfer between them. In wood-based composites the binder-component load transfer occurs at...
A three-dimensional model based on fundamental principles to simulate heat and
mass transfer and mat densification during hot pressing of wood-based composites is
presented. Mechanisms included in the analysis are water vapor and air transfer by gas
convection and molecular gas diffusion, conductive and convective heat transfer, and
sorptive effects,...
Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco] lumber was
converted to flakes, which were dip treated with three concentrations
each of copper chrome arsenate Type C (CCA-C), and disodium octaborate
tetrahydrate (TIM-BOR). Azaconazole [1-[{2-(2,4-dichloropheny1)-1,3-
dioxolan-2-yl}methyl]-1H-1,2,4-triazole] was used as powder. The
flakeboard panels (305 x 304 x 13 mm) were made using phenolformaldehyde...
The importance of wood bonding increased in the last decades due to the
increased usage of wood composites whose performance depends to a large extent on
the adhesive penetration and subsequent bonding of the adherends. The presented
research used XMT (x-ray microtomography) to perform a non-destructive, threedimensional
analysis of the...