Index Catalog // ScholarsArchive@OSU

A pipe entry length solution for heat transfer and flow in Powell-Eyring fluids with temperature-dependent viscosity and constant flux boundary condition

Creator:: Etchart, David Ygnacio
Resource Type:: Masters Thesis
Full Text:: ABSTRACT OF THE THESIS OF David Ygnacio Etchart (Name) in Mechanical Engineering (Major) for the Master

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Creator:: Zeuthen, Eric D.
Abstract:: The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
Resource Type:: Masters Thesis
Full Text:: : ______________________________________________________ David L. Blunck The purpose of this study is to measure and compare radiation emissions

An experimental study of heat transfer in a large particle heated fluidized bed

Creator:: Gosmeyer, Clayton David
Resource Type:: Masters Thesis
Full Text:: Heated Fluidized Bed AN ABSTRACT OF THE THESIS OF Clayton David Gosmeyer for the degree of Master of

Experimental Study of Nucleate Boiling Bubble Dynamics and Heat Transfer Enhancement on Printed Bi-functional Surfaces

Creator:: David, Michele
Abstract:: Boiling heat transfer is studied for its ability to dissipate high fluxes and achieve heat transfer coefficients two orders of magnitude greater than single-phase heat transfer systems. Heater surface enhancement with increased surface area, varied geometry, wettability contrast and micro/nano-structures can further enhance boiling heat transfer performance through bubble nucleation...
Resource Type:: Masters Thesis
Full Text:: Michele David for the degree of Master of Science in Chemical Engineering presented on December 6, 2016

Flat Plate Free Convective Heat Transfer

Creator:: Bristol, Benjanmin R.
Abstract:: The OSU MASLWR Test facility is a scaled integral systems LOCA and proof-of-concept test facility for the Multi-Application Small Light Water Reactor design concept. A unique feature of this design is to utilize a small high pressure containment vessel to provide the safety containment function for an integral reactor pressure...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Benjanmin R. Bristol for

Scaling of the Chinese HTR-PM Reactor Design for Licensing and Testing at the Oregon State University High Temperature Test Facility

Creator:: Cox, Jordan
Abstract:: The United States (US) Department of Energy (DOE) has identified the pebble-bed reactor as a high priority for US research with the end goal of licensing a pebble-bed reactor (PBR) for operation in the United States. Before this can be accomplished significant research must be done regarding the safety of...
Resource Type:: Masters Thesis
Full Text:: -dimensional force 𝑄𝑟𝑒𝑎𝑐𝑡𝑜𝑟: Thermal output of the reactor �⃑�: Gravity vector 𝑟: Non dimension

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Creator:: He, Xiaoliang
Abstract:: With continued development of the electronic industry, the demand for highly efficient heat removal solutions requires innovative cooling technologies. A computational fluid dynamic (CFD) study, including heat transfer, is performed for an axisymmetric, confined jet impingement experiencing boiling and coupled with vapor extraction. Boiling occurs at the target surface while...
Resource Type:: Masters Thesis
Full Text:: Dimensionless fluid temperature distributions, T*, as a function of dimensionless radial distance, r* , for

Turbulent heat transfer in annuli at large diameter ratios

Creator:: Unzicker, William Frank
Abstract:: Heat transfer from the inner wall of an annulus to subcooled water in turbulent parallel flow was studied. The inner core of the annulus consisted of wires varying from 0.0019 to 0.0197 inch in diameter. The outer tube consisted of a 1.01 inch diameter glass tube 24 inches long. Diameter...
Resource Type:: Masters Thesis
Full Text:: support were deeply appreciated. My gratitude is given to Professor J. R. Welty for renewing my interest

Performance and flow stability characteristics in two-phase confined impinging jets

Creator:: Sabo, Michael D.
Abstract:: Advances in electronics fabrication, coupled with the demand for increased computing power, have driven the demand for innovative cooling solutions to dissipate waste heat generated by these devices. To meet future demands, research and development has focused on robust and stable two-phase heat transfer devices. A confined impinging jet is...
Resource Type:: Masters Thesis
Full Text:: my parents, David and Patti Sabo, and my sister, Megan Sabo, for all their support and encouragement

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Creator:: Kapsenberg, Florian
Abstract:: This thesis presents a feasibility study of a means to passively effect liquid motion parallel to a heated surface though surface geometrical modifications. Such a passive system is beneficial for electronics cooling applications as it reduces the pumping equipment normally required in flow loops and is desired for space applications,...
Resource Type:: Masters Thesis
Full Text:: Agata Szewczuk for her support and, along with my friends David McIntosh, Kevin Harada, Jesse Grimes

ScholarsArchive@OSU

A pipe entry length solution for heat transfer and flow in Powell-Eyring fluids with temperature-dependent viscosity and constant flux boundary condition

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

An experimental study of heat transfer in a large particle heated fluidized bed

Experimental Study of Nucleate Boiling Bubble Dynamics and Heat Transfer Enhancement on Printed Bi-functional Surfaces

Flat Plate Free Convective Heat Transfer

Scaling of the Chinese HTR-PM Reactor Design for Licensing and Testing at the Oregon State University High Temperature Test Facility

CFD simulation of single-phase and flow boiling in confined jet impingement with in-situ vapor extraction using two kinds of multiphase models

Turbulent heat transfer in annuli at large diameter ratios

Performance and flow stability characteristics in two-phase confined impinging jets

Lateral fluid motion in nucleate boiling through asymmetric surface structures

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search