Index Catalog // ScholarsArchive@OSU

Shear strength and accelerated durability tests on glue joints in laminated red oak beams applicable to such uses as truck bodies, wagons, and implement parts

Creator:: Selbo, M. L. (Magnus Leonard), 1901- and Forest Products Laboratory (U.S.)
Abstract:: Report originally dated October 1947. Information reviewed and reaffirmed in 1962.
Resource Type:: Technical Report
Full Text:: information as to the amount of end trimming that would be required for laminated material. The 3-inch

Stress-rupture tests of a glass-fabric-base plastic laminate

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on aircraft design criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1959. Original report issued June 1953.
Resource Type:: Technical Report
Full Text:: typical polyester- type laminate so that more basic knowledge of mechanical properties of glass-fabric

High-strength laminated paper plastics for aircraft

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Revised April 1943. Publication restriction has been removed. This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: 76 18 : 80 : 85 2 • 5-Thickness of laminated plastic material (in molding pressure direction

Effect of thickness on strength of glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1959. Original report issued May 1954.
Resource Type:: Technical Report
Full Text:: facings have lower strength values than thick laminated material. The data plotted on these figures show a

Tensile properties of glass-fabric laminates with laminations oriented in any way

Creator:: Erickson, E. C. O., Norris, Charles, B. (Charles Brazer), 1894-, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued November 1955.
Resource Type:: Technical Report
Full Text:: presented. This analysis pro- vides a theoretical means of determining the mechanical properties at any

Factors affecting strength and design principles of glued laminated construction

Creator:: Forest Products Laboratory (U.S.) and Freas, Alan D'Yarmett, 1910-
Abstract:: Information reviewed and reaffirmed October 1962. Original report dated August 1956.
Resource Type:: Technical Report
Full Text:: , laminated from clear material and under long-time service at maximum design load and under wet conditions

Interlaminar properties of five plastic laminates

Creator:: Kimball, Kenneth Edmund and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: measured 18 inches in the warp direction and 12 inches wide. Because of a lack of material thick enough to

Mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.), Freas, Alan D'Yarmett, 1910-, and Werren, Fred
Abstract:: Information reviewed and reaffirmed 1959. Original report published March 1953.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES Of CROSS-LAMINATED ANC, COMPOSITE GLASS

Supplement to mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Creator:: Freas, Alan D'Yarmett, 1910-, Werren, Fred, and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed July 1961. Original report published in February 1951.
Resource Type:: Technical Report
Full Text:: Supplement to MECHANICAL PROPERTIES CIF CROSS4AMINATED AND

Mechanical properties of plastic laminates

Creator:: Stevens, Gordon H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Aircraft of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: MECHANICAL PINDPEPTIIES PLASTIC LAMINATES At'it No. 1820-1

ScholarsArchive@OSU

Shear strength and accelerated durability tests on glue joints in laminated red oak beams applicable to such uses as truck bodies, wagons, and implement parts

Stress-rupture tests of a glass-fabric-base plastic laminate

High-strength laminated paper plastics for aircraft

Effect of thickness on strength of glass-fabric-base plastic laminates

Tensile properties of glass-fabric laminates with laminations oriented in any way

Factors affecting strength and design principles of glued laminated construction

Interlaminar properties of five plastic laminates

Mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Supplement to mechanical properties of cross-laminated and composite glass-fabric-base plastic laminates

Mechanical properties of plastic laminates

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search