Index Catalog // ScholarsArchive@OSU

Tests of cargo flooring N and P for aircraft

Creator:: Liska, J. A. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: thick on the lower facing. The facings on floor P were of FS-lh magnesium alloy 0.090 inch thick on the

Tests of cargo flooring Pp and U for aircraft

Creator:: Johnson, L. F. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956. Original report issued April 1949.
Resource Type:: Technical Report
Full Text:: . The upper or wearing surface of floor Pp was FS-1A magnesium alloy 0.090 inch thick, and that of floor

Tests of extruded magnesium cargo flooring for aircraft

Creator:: Liska, J. A. and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: assembled from five configurations of magnesium alloy extrusions. Teets simulating loads applied in ser

The magnesium-zirconium alloys

Creator:: Viggers, Robert Frederick
Resource Type:: Masters Thesis
Full Text:: Iron Crucible . 19 Figure. 3. Steel Bomb, used for making Magnesium- Zirconium Alloy, with finished

Design of advanced aluminum silicon alloy compositions and processing

Creator:: Li, Xiao, 1963-
Abstract:: Part I discusses the development of an aluminum-magnesium-silicon alloy that may combine strength, extrudability, favorable corrosion resistance with low cost and scrap compatibility. The first part of the study determined the effects of small composition, heat treatment and mechanical processing changes on the ambient temperature tensile properties of the alloy....
Resource Type:: Dissertation
Full Text:: aluminum-magnesium-silicon alloy that may combine strength, extrudability, favorable corrosion resistance

The effect of small amounts of magnesium on the superplastic behavior of an aluminum-zinc alloy

Creator:: Abbott, Vaughn William
Abstract:: The base Al-Zn superplastic alloy was investigated at 250°C to determine the effect of small amounts of magnesium on mechanical properties. Six alloys of nominal composition 0.00, 0.10, 0.25, 0.50, 0.75, and 1.00 weight percent magnesium, constant 78 weight percent zinc, and variable 21 to 22 weight percent aluminum were...
Resource Type:: Masters Thesis
Full Text:: microstructure of the Al -Zn base alloy containing one percent magnesium. Unde- formed grip section, 500x. 35

Effect of surface treatment on the adhesive bonding properties of magnesium

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: was controlled to be 0.50 ± 0.01 inch. AZ31-H24, formerly designated as FS1-1-124,magnesium alloy

Creep tests on single strand aluminum alloy conductor wire

Creator:: Croeni, Jack George
Resource Type:: Masters Thesis
Full Text:: Creep Tests On Single Strand Aluminum Alloy Conductor Wire

Tests of cargo flooring R and S for aircraft

Creator:: Liska, J. A. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed January 1959. Original report issued June 1948.
Resource Type:: Technical Report
Full Text:: .--' _' The two floors tested, designated R and S / were aluminum-alloy floors having a flat sheet-aluminum

Tests of cargo flooring M for aircraft

Creator:: Yolton, L. A. and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: dimpled aluminum-alloy sheet. These two sheets were spot-welded to a dimpled-sheet base formed to

Tests of cargo flooring-L for aircraft

Creator:: Yolton, L. A. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956. Original report issued October 1946.
Resource Type:: Technical Report
Full Text:: earlier reportl. Floor L consists essentially of an aluminum alloy sheet formed to typical rounded

An investigation of precipitation from solid solution in an aluminum-magnesium-silicon alloy using x-ray diffraction techniques

Creator:: Guthrie, J. L. (James Leonard), 1937-
Abstract:: The thesis was an investigation into the mechanism of precipitation from solid solution in an Aluminum-0.7% Magnesium-0.6% Silicon alloy containing iron impurities. Laue x-ray diffraction patterns were obtained from solution heat treated and aged single crystal specimens in various crystallographic orientations. Precipitation related streaking was detected on some of the...
Resource Type:: Masters Thesis
Full Text:: an aluminum-magnesium-silicon alloy using x-ray diffraction techniques AN ABSTRACT OF THE THESIS OF

A study of methods for preparing clad 24S-T aluminum-alloy sheet surfaces for adhesive bonding : part III. effect of cleaning methods on resistance of bonded joints to salt-water spray

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued December 1950.
Resource Type:: Technical Report
Full Text:: A STUDY OF METHODS FOR PREIPAVING CLAD 24S-T ALUMINUM-ALLOY SHEET

A study of methods for preparing clad 24S-T3 aluminum-alloy sheet surfaces for adhesive bonding

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Schowalter, W. E.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: A STUDY CF METHODS FOR !PREPARING CLAD 24S-T3 ALUMINUM-ALLOY SHEET

Characterization of Oxide Growth of Aluminum Alloy 6061 for Nuclear Research and Test Reactors

Creator:: Wei, Youran
Abstract:: Oxide growth is a common phenomenon on aluminum alloy cladding surfaces in nuclear research and test reactors. Without better understanding of oxide growth, excessive oxide build up on the cladding surface reduces heat transfer capability from fuel to coolant and causes safety concerns due to the potential cladding rupture or...
Resource Type:: Masters Thesis
Full Text:: conditions, the objectives of extending the existing database of aluminum alloy corrosion and testing

Tests of cargo flooring Nn and T for aircraft

Creator:: Liska, J. A. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956. Original report published October 1948.
Resource Type:: Technical Report
Full Text:: cotton duck honeycomb core and 24ST aluminum alloy facings. The only difference in construction is the

Basic shear strength properties of metal-bonding adhesives as determined by lap-joint stress formulas of volkersen and goland and reissner

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report dated August 1955.
Resource Type:: Technical Report
Full Text:: tests were made of lap-joint specimens of clad 75S-T6 aluminum alloy with various lengths of overlap and

Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949.
Resource Type:: Technical Report
Full Text:: Report No. 1804. Specimens and Methods of Testing Plates of clad 243-T3 aluminum alloy 5 by 8 inches

Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: GLUED JOINTS BETWEEN ALUMINUM AND END-GRAIN BALSA 1 — By HERBERT EICIaTER, Engineer Aluminum alloy

The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953.
Resource Type:: Technical Report
Full Text:: PROPERTIES CI STRUCTURAL METAL-IC-METAL ADHESIVES IN BONDS TO 24S-T3 ALUMINUM ALLOY Information Reviewed

ScholarsArchive@OSU

Tests of cargo flooring N and P for aircraft

Tests of cargo flooring Pp and U for aircraft

Tests of extruded magnesium cargo flooring for aircraft

The magnesium-zirconium alloys

Design of advanced aluminum silicon alloy compositions and processing

The effect of small amounts of magnesium on the superplastic behavior of an aluminum-zinc alloy

Effect of surface treatment on the adhesive bonding properties of magnesium

Creep tests on single strand aluminum alloy conductor wire

Tests of cargo flooring R and S for aircraft

Tests of cargo flooring M for aircraft

Tests of cargo flooring-L for aircraft

An investigation of precipitation from solid solution in an aluminum-magnesium-silicon alloy using x-ray diffraction techniques

A study of methods for preparing clad 24S-T aluminum-alloy sheet surfaces for adhesive bonding : part III. effect of cleaning methods on resistance of bonded joints to salt-water spray

A study of methods for preparing clad 24S-T3 aluminum-alloy sheet surfaces for adhesive bonding

Characterization of Oxide Growth of Aluminum Alloy 6061 for Nuclear Research and Test Reactors

Tests of cargo flooring Nn and T for aircraft

Basic shear strength properties of metal-bonding adhesives as determined by lap-joint stress formulas of volkersen and goland and reissner

Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa

The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search