Index Catalog // ScholarsArchive@OSU

Effect of high and low temperatures on resin glue joints in birch plywood

Creator:: Forest Products Laboratory (U.S.) and Blomquist, Richard Frederick, 1912-
Abstract:: Information reviewed and reaffirmed, March 1956. Revised January 1944.
Resource Type:: Technical Report
Full Text:: UNIVERSITY EFFECT Of 1111G11 AI) LOW TEMPEPATURES ON RESIN Mt MINTS IN 1311IRCIA PLYWOOD Information

Effects of elevated curing temperatures on the strength and durability of yellow birch plywood joints made with room-temperature-setting urea glues

Creator:: Forest Products Laboratory (U.S.), Black, John M., Olson, W. Z., and Bruce, H. D.
Abstract:: Information reviewed and reaffirmed, 1961. Original report dated 1945.
Resource Type:: Technical Report
Full Text:: , there was no important effect on the original joint strength or joint durability by the temperature. of

Curing of resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F

Creator:: Forest Products Laboratory (U.S.), Olson, W. Z., Bruce, H. D., and Soper, V. R.
Abstract:: Information reviewed and reaffirmed August 1958. Original report issued August 1946.
Resource Type:: Technical Report
Full Text:: for comparison . (2) Observations on the rate of development of shear strength in block joint s at

Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949.
Resource Type:: Technical Report
Full Text:: Reached) By EDWARD W. KUENZI, Engineer Summary Tests were performed on lap-joint specimens of clad 24S

Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures

Creator:: Eickner, Herbert W., Olson, W. Z., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: adhesive-bonded, lap-joint specimens of corrosion-resisting steel. Four representative adhesives were

Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: the area of the joint under test. The temperature of the insulated cabinet was controlled so that the

Durability of room-temperature-setting and intermediate-temperature-setting resin glues cured to different degrees in Yellow Birch plywood

Creator:: Forest Products Laboratory (U.S.), Black, John M., and Olson, W. Z.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: effect of undercuring on the rate of decrease in joint strength was less marked than its effect on

Effect of closed assembly time on joint strength in gluing with low-temperature-setting phenol, resorcinol, and melamine glues

Creator:: Forest Products Laboratory (U.S.) and Olson, W. Z.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: Wisconsin EFFECT OF CLOSED ASSEMBLY TIME ON JOINT STRENGTH IN GLUING WITH LOW-TEMPERATURE-SETTING PHENOL

Development of joint strength in birch plywood glued with phenol-, resorcinol-, and melamine-resin glues cured at several temperatures

Creator:: Forest Products Laboratory (U.S.), Bruce, H. D., Olson, W. Z., Black, John M., and Rauch, A. H.
Abstract:: Information reviewed and reaffirmed August 1960.
Resource Type:: Technical Report
Full Text:: the effect of species are not pronounced for the intermediate-temperature-setti ng phenol glues. The

Development of strength in yellow birch lap joints glued with six resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F.

Creator:: Forest Products Laboratory (U.S.), Olson, W. Z., and Blomquist, Richard Frederick, 1912-
Resource Type:: Technical Report
Full Text:: were included in this study to provide more information on those differences in the curing rate of a

ScholarsArchive@OSU

Effect of high and low temperatures on resin glue joints in birch plywood

Effects of elevated curing temperatures on the strength and durability of yellow birch plywood joints made with room-temperature-setting urea glues

Curing of resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F

Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures

Tensile strength at elevated temperature of glued joints between aluminum and end-grain balsa

Durability of room-temperature-setting and intermediate-temperature-setting resin glues cured to different degrees in Yellow Birch plywood

Effect of closed assembly time on joint strength in gluing with low-temperature-setting phenol, resorcinol, and melamine glues

Development of joint strength in birch plywood glued with phenol-, resorcinol-, and melamine-resin glues cured at several temperatures

Development of strength in yellow birch lap joints glued with six resorcinol-resin glues at temperatures from 40 degrees to 80 degrees F.

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Location

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search