Index Catalog // ScholarsArchive@OSU

1. Effect of nail points on the withdrawal resistance of plain nails

Creator:: Forest Products Laboratory (U.S.) and Scholten, John A.
Abstract:: Information reviewed and reaffirmed, August 1962. Original report dated 1930.
Resource Type:: Technical Report
Full Text:: holding wooden members. These factors include size of nail, type of shank, and kind of point. This report

2. Aircraft nail gluing

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Publication restrictions have been removed. This report is one of a series issued to aid the nation's defense effort.
Resource Type:: Technical Report
Full Text:: thicknesses, nail sizes, nailing strips, and the relative merits of yellowpoplar and spruce cap strips. The

3. Clinching of nails in container construction

Creator:: Forest Products Laboratory (U.S.), Borkenhagen, E. H., and Kuelling, H. J.
Resource Type:: Technical Report
Full Text:: the nail pulled only a fraction of an inch, is recorded in tables 2 and 3. Report No. R1777 Effect

4. Wrinkling of the facings of sandwich construction subjected to edgewise compression

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, Ericksen, Wilhelm S., March, H. W., Smith, C. B., and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed April 1961. Previous report dated November 1949.
Resource Type:: Technical Report
Full Text:: EDGEWISE COMPRESSION LOIN COPY Please return to: S Information Reviewed and Reaffirmed April 1961 No

5. Strength of orthotropic materials subjected to combined stresses

Creator:: Norris, Charles, B. (Charles Brazer), 1894- and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed May 1962. Results here reported were obtained during 1950.
Resource Type:: Technical Report
Full Text:: the formula, and good agreement is found. Mathematical Development The General Henky-von Mises

6. Evaluation of a vacuum-induced concentrated-load sandwich tester

Creator:: Forest Products Laboratory (U.S.), Heebink, Bruce G., Kuenzi, Edward W., and Ericksen, Wilhelm S.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: CONCENTRATED-LOAD SANDWICH TESTER- By B. G. HEEBINK, Engineer E. W. KUENZI, Engineer and W. S. ERICKSEN

7. Analysis of long cylinders of sandwich construction under uniform external lateral pressure

Creator:: Forest Products Laboratory (U.S.) and Raville, Milton E.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board
Resource Type:: Technical Report
Full Text:: take into account failure due to elastic instability, and an equation is derived for the determination

8. Supplement to analysis of long cylinders of sandwich construction under uniform external lateral pressure facings of moderate and unequal thickness

Creator:: Raville, Milton E. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: LATERAL PRESSURE Facings of Moderate and Unequal Mid-messes Wood Engineering Research Forest Products

9. Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

Creator:: Forest Products Laboratory (U.S.) and Raville, Milton E.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed September 1962. Original report dated December 1955.
Resource Type:: Technical Report
Full Text:: • 1111111, DEFLECTION AND STRESSES IN A UNIFORMLY LOADED, SIMPLY

10. Supplement to deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate : experimental verification of theory

Creator:: Lewis, Wayne C., 1914- and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued December 1956.
Resource Type:: Technical Report
Full Text:: veri- fication of the mathematical derivations presented in Report 1847. Panels 20 by 20 and 20 by 30

ScholarsArchive@OSU

1. Effect of nail points on the withdrawal resistance of plain nails

2. Aircraft nail gluing

3. Clinching of nails in container construction

4. Wrinkling of the facings of sandwich construction subjected to edgewise compression

5. Strength of orthotropic materials subjected to combined stresses

6. Evaluation of a vacuum-induced concentrated-load sandwich tester

7. Analysis of long cylinders of sandwich construction under uniform external lateral pressure

8. Supplement to analysis of long cylinders of sandwich construction under uniform external lateral pressure facings of moderate and unequal thickness

9. Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

10. Supplement to deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate : experimental verification of theory

Limit your search

Creator

Date

Decade

File Format

Language

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

1. Effect of nail points on the withdrawal resistance of plain nails

2. Aircraft nail gluing

3. Clinching of nails in container construction

4. Wrinkling of the facings of sandwich construction subjected to edgewise compression

5. Strength of orthotropic materials subjected to combined stresses

6. Evaluation of a vacuum-induced concentrated-load sandwich tester

7. Analysis of long cylinders of sandwich construction under uniform external lateral pressure

8. Supplement to analysis of long cylinders of sandwich construction under uniform external lateral pressure facings of moderate and unequal thickness

9. Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

10. Supplement to deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate : experimental verification of theory

Limit your search