Search Constraints

Start Over
Filtering by: Subject Airplanes, Wooden -- Design and construction Remove constraint Subject: Airplanes, Wooden -- Design and construction License All rights reserved Remove constraint License: All rights reserved Peer Reviewed No Remove constraint Peer Reviewed: No

Search Results

  • Slotted-bolted friction damper as a seismic energy dissipator in a braced timber frame

    Creator:
    Tjahyadi, Alfred
    Abstract:
    Friction dampers have been used successfully to dissipate seismic energy in steel and concrete structures. The application is new to timber structures. The objectives of this research were to design a slotted bolted connection (SBC) and evaluate its potential as a passive energy damper in timber brace. The research was...
    Resource Type:
    Masters Thesis
    Full Text:
    Engineering I' Head of Department f Wood Science and Engineering Head of Department of Civil, Construction

  • Evaluation of system effects and structural load paths in a wood-framed structure

    Creator:
    Martin, Kenneth G.
    Abstract:
    The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
    Resource Type:
    Masters Thesis
    Full Text:
    Head of the School of Civil and Construction Engineering Dean of the Graduate School I

  • A force plate for measuring contact forces during dependent transfers onboard aircraft

    Creator:
    Schafer, Christopher A.
    Abstract:
    The transfer of air travelers with disabilities between a mobility aid and an aircraft seat is a major source of injury for both the travelers and the airline personnel assisting in the transfer. The risk to both parties might be reduced through the biomechanical study of the transfer task. Such...
    Resource Type:
    Masters Thesis
    Full Text:
    2.4.12. Analysis of force plate design for manufacturability and the resulting modifications

  • Aircraft wing optimization using B-spline models and panel methods

    Creator:
    Jackson, Danielle Monique
    Abstract:
    This research investigates shape optimization process, using b-spline models and panel methods, to achieve a high lift to drag ratio for an aerodynamic structure. This research is a proof of concept for further research in aerodynamic shape optimization. The coupled process, involving the design and optimization of a random shape,...
    Resource Type:
    Masters Thesis
    Full Text:
    process, involving the design and optimization of a random shape, is outlined in three major steps that

  • Light-frame versus timber frame : a study in quantifying the differences

    Creator:
    Malone, Brian P.
    Abstract:
    The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
    Resource Type:
    Masters Thesis
    Full Text:
    traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered

  • Practical modeling for load paths in a realistic, light-frame wood house

    Creator:
    Pfretzschner, Kathryn S.
    Abstract:
    The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
    Resource Type:
    Masters Thesis
    Full Text:
    Acting Head of the School of Civil and Construction Engineering Dean of the Graduate School