Search Constraints

Start Over
Filtering by: Creator Dawson, Robert E. Remove constraint Creator: Dawson, Robert E. License All rights reserved Remove constraint License: All rights reserved Subject Analog-to-digital converters -- Design and construction Remove constraint Subject: Analog-to-digital converters -- Design and construction

Search Results

  • Adaptive, wideband analog-to-digital conversion for convergent communication systems

    Creator:
    Batten, Robert D., 1973-
    Abstract:
    The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
    Resource Type:
    Dissertation
    Full Text:
    C:/Users/Robert Batten/Documents/School/PhdThesis

  • Low-power high-resolution delta-sigma ADC design techniques

    Creator:
    Wang, Tao
    Abstract:
    This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
    Resource Type:
    Dissertation
    Full Text:
    dissertation. Reference [1-1] N. Verma, A. Shoeb, J. Bohorquez, J. Dawson, J. Guttag, and A. P

  • Micropower incremental analog-to-digital converters

    Creator:
    Chen, Chia-Hung
    Abstract:
    Incremental ADCs (IADCs) have many advantages for low-frequency high-accuracy data conversion—they are easy to multiplex between channels, need simpler digital decimation filter, and allow extended counting with a Nyquist-rate ADC. A single-loop incremental ADC was designed and fabricated in 90 nm for a biosensor interface circuit. It incorporates one integrator,...
    Resource Type:
    Dissertation
    Full Text:
    U M 1 E M [ ] (2.1)[ ]  W M [ ]  [ ] V M The analog integrator samples the input U and

  • Design of a 1.8-V 14-bit [delta] - [sigma] A/D converter with 8X oversampling and 4 MHz Nyquist output rate

    Creator:
    Jiang, Ruoxin
    Abstract:
    In this dissertation, a new Δ∑ A/D converter is presented that is ideally suited for communication applications. It is based on a single-loop single-stage structure, which can realize a high maximum out-of-band quantization noise gain while maintaining stable operation and thus achieve 14-bit resolution at 8 times oversampling. A fifth-order...
    Resource Type:
    Dissertation
    Full Text:
    Robert Batten, Tina Batten, Aria Eshraghi, Steve Dunlap, Yongmin Ge, Suet Fong Tin, Paul Stulik, Travis

  • Design techniques for low power ADCs

    Creator:
    Yu, Wenhuan
    Abstract:
    This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise. In the calibration mode, the incremental ADC...
    Resource Type:
    Dissertation
    Full Text:
    h e h (2-14) 14 where O is defined in (2-12) and e is [ ]T1 , ,1 ,1  . The objective

  • Design of a 14-bit continuous-time Delta-Sigma A/D modulator with 2.5MHz signal bandwidth

    Creator:
    Li, Zhimin
    Abstract:
    In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications. So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
    Resource Type:
    Dissertation
    Full Text:
    , Robert Batten, Ruoxin Jiang and Madhu Chennam deserve special recognition for their contributions to

  • Design techniques for wideband low-power Delta-Sigma analog-to-digital converters

    Creator:
    Wang, Yan
    Abstract:
    Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are traditionally used in high quality audio systems, instrumentation and measurement (I&M) and biomedical devices. With the continued downscaling of CMOS technology, they are becoming popular in wideband applications such as wireless and wired communication systems,high-definition television and radar systems. There are two general realizations...
    Resource Type:
    Dissertation
    Full Text:
    thus given by N N rms u e A SQNR 22 232 2 2 max, max 22 3 12/ 22/      (2.2

  • Low voltage switched capacitor circuits for lowpass and bandpass [delta sigma] converters

    Creator:
    Keskin, Mustafa
    Abstract:
    The most accurate method for performing analog signal processing in MOS (metal-oxide-semiconductor) integrated circuits is through the use of switched-capacitor circuits. A switched-capacitor circuit operates as a discrete-time signal processor. These circuits have been used in a variety of applications, such as filters, gain stages, voltage-controlled oscillators, and modulators. A...
    Resource Type:
    Dissertation
    Full Text:
    Bidari, Tetsuya Kajita, Lei Wu, Peter Kiss, Dong-Young Chang, Robert Batten, Byung-Moo Mm have

  • High-performance delta-sigma analog-to-digital converters

    Creator:
    da Silva, Jose Barreiro
    Abstract:
    Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
    Resource Type:
    Dissertation
    Full Text:
    contributions to this work, I wish to thank Dr. Xuesheng Wang, Robert Batten, Dr. Peter Kiss, Dr. Jesper

  • Design techniques for low-voltage analog-to-digital converter

    Creator:
    Chang, Dong-Young
    Abstract:
    Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low-voltage conditions. There are several well-known techniques to bypass the problem. These approaches include: (1)...
    Resource Type:
    Dissertation
    Full Text:
    Jose' Silva for helping me with valuable CAD support and Robert Batten for testing. It had been the