Index Catalog // ScholarsArchive@OSU

Creator:: Li, Wennan
Abstract:: The Steel Plate Shear Wall (SPSW) system, is an innovative seismic lateral force resistant system, which has experienced increased use over the last three decades. The SPSW system is composed of boundary elements which anchor web plates that develop diagonal tension fields. A number of SPSW buildings have been built...
Resource Type:: Masters Thesis

Creator:: Gianella, Tygh N.
Abstract:: Seismically-induced liquefaction represents a major cause of damage to civil infrastructure and can result in significant damage following major earthquakes. Liquefaction can occur when earthquake ground motions raise pore-water pressures in loose, sandy soil, resulting in a substantial decrease of soil strength. Owing to the potential for instability following liquefaction,...
Resource Type:: Masters Thesis

Creator:: Kramer, Anthonie
Abstract:: The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
Resource Type:: Masters Thesis

Creator:: Lucksiri, Kraisorn
Abstract:: During the past several decades, earthquakes have caused extensive damage to buildings, including wood-frame, single-family dwellings, in the United States. In order to mitigate future losses, existing buildings in earthquake prone areas should be evaluated for their seismic safety. This is also an important issue for buildings in Oregon due...
Resource Type:: Dissertation

Creator:: Tjahyadi, Alfred
Abstract:: Friction dampers have been used successfully to dissipate seismic energy in steel and concrete structures. The application is new to timber structures. The objectives of this research were to design a slotted bolted connection (SBC) and evaluate its potential as a passive energy damper in timber brace. The research was...
Resource Type:: Masters Thesis

Creator:: Eiden, Claudia M. T.
Abstract:: Engineering analysis of heavy timber structures under dynamic loads is generally lacking. Some literature suggests that heavy timber structures are stiffer than expected, but popular engineering opinion is to the contrary. In addition, prior research has shown that passive friction dampers can be used in timber structures for the intended...
Resource Type:: Masters Thesis

ScholarsArchive@OSU