Index Catalog // ScholarsArchive@OSU

A thermal hydraulics analysis of a molybdenum production element for implementation in TRIGA reactors

Creator:: Byfield, Patrick
Abstract:: The metastable isotope of technetium-99 (Tc-99m) is an important diagnostic tool used in the field of nuclear medicine due to the isotope's 6.0 hour half-life, 140.5 keV γ-decay mechanism, and multiple oxidation states [1,2]. Approximately 70% of the world’s nuclear medicine procedures involve the use of Tc-99m [3]. The conventional...
Resource Type:: Masters Thesis
Full Text:: crit EIP R  =     , (3-4) note that E is the Young’s Modulus of the cladding (Pa), I is the

Natural Convection Heat Transfer and Boundary Layer Transition for Vertical Heated Cylinders

Creator:: Goodrich, Sam S.
Abstract:: In recent years, the global nuclear industry has placed a greater emphasis on passively safe reactor designs. In particular, much attention and design work has been applied to engineered systems for passive cooling of nuclear fuel, whether it be loaded in a core or stored in spent fuel pools. The...
Resource Type:: Dissertation
Full Text:: Wade R. Marcum In recent years, the global nuclear industry has placed a greater emphasis on

Experimental investigation of supercritical heat transfer of carbon dioxide in parallel square microchannels with a single-wall constant heat flux boundary condition

Creator:: Zada, Kyle R.
Abstract:: In the vicinity of the pseudocritical point, supercritical carbon dioxide (sCO₂) undergoes a steep change in properties from “liquid-like” to “gas-like” as it is heated at a constant pressure. At the same time, there is a large spike in specific heat which can yield high heat transfer coefficients and heat...
Resource Type:: Masters Thesis
Full Text:: THE THESIS OF Kyle R. Zada for the degree of Master of Science in Mechanical Engineering presented

Heat transport at interface in the metal-organic-frameworks MOF-5

Creator:: Huang, Wenxi
Abstract:: The metal-organic–framework MOF-5 is used as an adsorbent in advanced systems for vehicular hydrogen storage that are currently under development. Presently, these systems are limited by poor thermal conductivity of the adsorption bed, and thus our research addresses how the interfaces between grains of MOF-5 can be engineered to improve...
Resource Type:: Masters Thesis
Full Text:: . Kubo, R. (1957). Statistical-Mechanical Theory of Irreversible Processes : I. General Theory and

Experimental Study of Nucleate Boiling Bubble Dynamics and Heat Transfer Enhancement on Printed Bi-functional Surfaces

Creator:: David, Michele
Abstract:: Boiling heat transfer is studied for its ability to dissipate high fluxes and achieve heat transfer coefficients two orders of magnitude greater than single-phase heat transfer systems. Heater surface enhancement with increased surface area, varied geometry, wettability contrast and micro/nano-structures can further enhance boiling heat transfer performance through bubble nucleation...
Resource Type:: Masters Thesis
Full Text:: I understand that my thesis will become part of the permanent collection of Oregon State

Scaling analysis of the Direct Reactor Auxiliary Cooling System for Gas-cooled Fast Reactors during a Depressurized Loss of Forced Convection Event

Creator:: Blake, Grant C.
Abstract:: The Direct Reactor Auxiliary Cooling System (DRACS) is a passive safety system capable of removing decay heat directly from the reactor core. Its modularity makes it scalable for use in reactors with various power levels. Work has previously been completed to support inclusion of the DRACS in liquid metal reactors...
Resource Type:: Masters Thesis
Full Text:: School of Nuclear Science and Engineering Dean of the Graduate School I understand that my

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Creator:: Zeuthen, Eric D.
Abstract:: The purpose of this study is to measure and compare radiation emissions from flames burning large hydrocarbon fuels to assist in understanding how the molecular composition changes radiation emissions. Radiative heat transfer is significant because it is a primary mode of heat transfer for many combustion devices. This study also...
Resource Type:: Masters Thesis
Full Text:: mid-infrared camera (FLIR, SC6700), respectively. The radiant fraction (χR), or the ratio of the

Predicting Thermal Conductivity in Nuclear Fuels using Rattlesnake-Based Deterministic Phonon Transport Simulations

Creator:: Harter, Jackson R.
Abstract:: The Boltzmann transport equation derived in the Self-Adjoint Angular Flux (SAAF) formulation is applied to simulate phonon transport. The neutron transport code Rattlesnake is leveraged in this fashion, slightly modi ed to accept input from variables consistent with phonon transport simulations. Several benchmark problems are modeled to assess the potential...
Resource Type:: Masters Thesis
Full Text:: : I (r, θ, φ) = 1 4π ∫ ωlimit 0 ∑ p vgh̄ωD (ω) dω. (9) Here D (ω) is phonon density of states per

Scaling of the Chinese HTR-PM Reactor Design for Licensing and Testing at the Oregon State University High Temperature Test Facility

Creator:: Cox, Jordan
Abstract:: The United States (US) Department of Energy (DOE) has identified the pebble-bed reactor as a high priority for US research with the end goal of licensing a pebble-bed reactor (PBR) for operation in the United States. Before this can be accomplished significant research must be done regarding the safety of...
Resource Type:: Masters Thesis
Full Text:: Science and Engineering Dean of the Graduate School I understand that my thesis will

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

Creator:: Rasouli, Erfan
Abstract:: The ever increasing requirements for heat dissipation in various thermal management applications such as computer chip cooling and high power electronics have necessitated the need for novel thermal management techniques. Thermal management using heat sinks with microscale features is amongst the prominent techniques developed over the past two decades. In...
Resource Type:: Dissertation
Full Text:: Mechanical, Industrial and Manufacturing Engineering Dean of the Graduate School I

ScholarsArchive@OSU

A thermal hydraulics analysis of a molybdenum production element for implementation in TRIGA reactors

Natural Convection Heat Transfer and Boundary Layer Transition for Vertical Heated Cylinders

Experimental investigation of supercritical heat transfer of carbon dioxide in parallel square microchannels with a single-wall constant heat flux boundary condition

Heat transport at interface in the metal-organic-frameworks MOF-5

Experimental Study of Nucleate Boiling Bubble Dynamics and Heat Transfer Enhancement on Printed Bi-functional Surfaces

Scaling analysis of the Direct Reactor Auxiliary Cooling System for Gas-cooled Fast Reactors during a Depressurized Loss of Forced Convection Event

Radiation Emissions from Turbulent Diffusion Flames Burning Large Hydrocarbon Fuels

Predicting Thermal Conductivity in Nuclear Fuels using Rattlesnake-Based Deterministic Phonon Transport Simulations

Scaling of the Chinese HTR-PM Reactor Design for Licensing and Testing at the Oregon State University High Temperature Test Facility

Single Phase and Flow Boiling Heat Transfer and Flow Characterization in Microscale Pin Fin Heat Sinks

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search