Nickel or nickel alloys are common materials used in under bump metallization (UBM) in flip chip technology. Nickel is used because of its slow reaction rate with tin-based solder at
elevated temperatures. However, nickel is ferromagnetic at room temperature, hence cannot be easily deposited with magnetron sputtering. In this study,...
Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
The miniaturization of Microtechnology-based Energy, Chemical and Biological Systems (MECS) is made possible by the use of high aspect ratio microchannel arrays to increase the surface-area-to-volume ratio of the flow conduits within the devices, resulting in an improvement in the heat and mass transfer performance of the devices. However, advantages...
The diffusion of divalent nickel (Ni²⁺) from wet silica gels was investigated.
Silica gel is gaining interest as an encapsulation matrix for biological components.
The transport of biologically relevant species within the gel is determined by the
structural characteristics of the gel, which are in turn governed by synthesis
parameters....
Dry reforming of methane to syngas using CO2 was performed in a solar-driven milli-scale reactor, which converts solar energy to chemical energy. The process aims to upgrade the energy content of the feed stream using sustainable energy. The effect of mean residence time, temperature and CO2:CH4 ratio on conversion and...
In this thesis, I present studies in the field of terahertz (THz) spectroscopy. These studies are divided into three areas: Development of a narrowband THz source, the study of carrier transport in metal thin films, and the exploration of coherent dynamics of quasi-particles in semiconductor nanostructures with both broadband and...
Electric power needs will only grow over the next decades as more humans ascend from poverty into the middle class. Currently, the majority of electric power is generated by burning fossil fuels. To help mitigate the undesirable effects of burning fossil fuels research is being done to increase the efficiency...
To improve the performance of solid oxide fuel cells, a secondary power cycle can be driven by the recuperation of exhaust gas heat. Microchannel recuperators are attractive for waste heat recuperation due to compact form factors which also minimize the mass of the expensive superalloys required. This paper introduces a...