Index Catalog // ScholarsArchive@OSU

Creator:: Guo, Yizhi
Abstract:: Prepreg is widely used in composite manufacturing with advanced composites such as carbon and aramid. The material is characterized by a degree of flexibility (drape) and stickiness (tack), which allows an efficient layup on molds with complex shapes. However, axial instability of compressed fibers during the molding process may occur,...
Resource Type:: Masters Thesis
Full Text:: using molds [1]. In order to quantify the mechanical advantage of composite materials, specific

Creator:: Saputra, Hartono A.
Abstract:: Natural fibers such as wood, flax, and hemp are frequently used as fillers in natural fiber-plastic composites (NFPCs). At present, wood fiber is the most commonly used filler in the production of wood-plastic composites (WPCs). The advantages of these fibers compared to conventional inorganic fibers such as glass fiber is...
Resource Type:: Masters Thesis
Full Text:: one composite board. The evaluation of mechanical properties The data acquisition and data analysis

Creator:: Chan, Han Ling
Abstract:: Understanding the effect on the materials mechanical properties from the perspective of interfacial interaction between the filler and the polymer matrix has become an important criterion in polymer nanocomposites field. Cellulose nanocrystals (CNCs) are renewable materials that can be extracted from natural sources, such as wood, cotton, and tunicates. In...
Resource Type:: Masters Thesis
Full Text:: expected to improve mechanical properties of composite materials due to strengthened interface (Figures 1

Creator:: Vidrine, Cheney L.
Abstract:: The effects of incorporation of selected biocides on physical and mechanical properties of aspen strandboard were assessed using five copper-based preservatives or zinc borate at three retention levels. Tebuconazole or 4,5-dichloro-2-N-octyl-4-isothiazolin-3-one (DCOI) were added as co-biocides to selective copper-based treatments. Mold box tests showed that only panels treated with DCOI...
Resource Type:: Masters Thesis
Full Text:: on physical and mechanical properties of aspen strandboard were assessed using five copper-based

Creator:: Froemming, Tyler M.
Abstract:: Identifying material characteristics of composites is important in designing any structural system. The aerospace industry relies on these material properties not only to design a functional aircraft, but also a safe and reliable one. Since carbon fiber composites are relatively new materials, little is known about its characteristics under certain...
Resource Type:: Masters Thesis
Full Text:: Composite Panels Loaded in Out-of-Plane Shear AN

Creator:: Chuang, Chih-Lan Jasmine
Abstract:: Identifying material parameters in composite plates is a necessary first step in a variety of structural applications. For example, understanding the material parameters of carbon fiber composite is important in investigating sensor and actuator placement on micro-air-vehicle wings for control and wing morphing purposes. Knowing the material parameters can also...
Resource Type:: Masters Thesis
Full Text:: degree of Master of Science in Mechanical Engineering presented on May 1, 2012. Title: Application of

Creator:: Wu, Yili
Abstract:: Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
Resource Type:: Dissertation
Full Text:: mechanical analyses. Mechanical properties such as flexural and tensile properties of the composites were

Creator:: Arias Gonzales, Sergio
Abstract:: Ever since composite laminate technology was introduced into the aerospace and automotive industry, there has been a need to fully understand the damage progression experienced by composite laminated plates in the presence of a notch. While numerous research studies have been conducted on this matter when subjected to in-plane loads,...
Resource Type:: Dissertation
Full Text:: Sergio G. Arias for the degree of Doctor of Philosophy in Mechanical Engineering presented on February

ScholarsArchive@OSU