Index Catalog // ScholarsArchive@OSU

Surface Modification to Enhance Corrosion Resistance of Carbon Steels using Additive Manufacturing

Creator:: Murkute, Pratik V.
Abstract:: Low carbon steels (LCS) due to their high strength-to-cost ratio are one of the most ubiquitous materials used for a wide range of applications, including but not limited to automotive, construction, and transportation. However, the low corrosion resistance of LCS in neutral, acidic, or saline environments limits its utilization and...
Resource Type:: Dissertation
Full Text:: would like to thank my committee members, Dr. Julie Tucker, Prof. David Trejo, and Prof. Yun-Shik Lee

Improving Long-Term Interlayer Bond Performance by Developing Quality Control Technologies and Certification Procedures for Tack Coats

Creator:: Villarreal, Richard C., III
Abstract:: The tack coat bond is known to affect the longevity of asphalt pavements. Proper interlayer bonding prevents successive pavement layers from acting independently of one another and creating non-uniform stress and strain profiles in the pavement structure. Poor bonding between pavement layers can result in various pavement failures such as...
Resource Type:: Masters Thesis

Conceptual Representations within the Social and Material Contexts of an Engineering Workplace and Academic Environments

Creator:: Barner, Matthew S.
Abstract:: Situated cognition theory emphasizes the role that social and material contexts have on learning and knowledge application. Several studies of engineering workplace environments have noted differences between the social and material contexts of the workplace and those of undergraduate engineering education. No existing research has studied the social and material...
Resource Type:: Dissertation
Full Text:: Chapter 2. Allyson Barlow assisted with editing Chapter 3. David Linton assisted with the writing and

Numerical response of concrete-lined tunnels crossing active faults

Creator:: Lange, Stephanie
Abstract:: A challenge for municipal authorities of growing urban areas is to provide larger and faster transportation and utility networks that are safe and resilient to significant disruptions after an earthquake event and other disasters. Urban regions, like the San Francisco Bay or the Los Angeles area, are situated in seismically...
Resource Type:: Dissertation
Full Text:: also like to express my sincere thanks to my dissertation committee members, Dr. David Trejo and Dr

The Evaluation of Cementitious Pore Solution Composition and Electrical Resistivity Using X-ray Fluorescence (XRF)

Creator:: Tsui Chang, Marisol
Abstract:: Interest in performance specifications has been growing in the civil and construction industry in the past decade. One major focus area has been on understanding how to prolong the service life of concrete structures, since repair and rehabilitation of existing infrastructure have cost many trillions of dollars. Deterioration mechanisms such...
Resource Type:: Masters Thesis
Full Text:: -authored by Dr. Prannoy Suraneni, Dr. O. Burkan Isgor, Dr. David Trejo, and Dr. W. Jason Weiss. This

Toward a mixture design methodology for internally cured concrete that considers filling specific pore sizes caused by self-desiccation

Creator:: Montanari, Luca
Abstract:: Internal curing is a term used to describe a process in which curing water is provided to a concrete mixture from inside the mixture. Internal curing water has typically been provided in North America mixtures by using prewetted porous materials, like fine lightweight aggregate (FLWA). Alternative materials, such as superabsorbent...
Resource Type:: Masters Thesis

A Comprehensive Mechanistic Study on Using Fine Lightweight Aggregate to Mitigate Alkali-silica Reaction

Creator:: Li, Chang
Abstract:: Previous research has shown that using fine lightweight aggregate (FLWA) can be a promising strategy to mitigate alkali-silica reaction (ASR) in mortar and concrete. While several possible theories were proposed by researchers, discrepancies in testing methods, materials, and supporting evidence still exist. Therefore, this study was initiated. There are two...
Resource Type:: Dissertation
Full Text:: research, making presentations and writing papers. Thanks so much for your help. Thank you to Dr. Trejo

Evaluation of the Effect of Chloride Ingress and Freeze-Thaw Cycles on Electrical Resistivity of Reinforced Concrete

Creator:: Rodriguez Matiz, David Esteban
Abstract:: Performing bridge inspections can be a very daunting task for every department of transportation (DOT) in the country. Because the leading cause of deterioration in reinforced concrete bridge decks is corrosion of the steel reinforcement, the ability to detect the concentration of corrosion-causing chlorides in the concrete, using a non-destructive...
Resource Type:: Masters Thesis
Full Text:: believing in me. To my committee members, Dr. Jason H. Ideker, O. Burkan Isgor, and Dr. David Trejo, Dr

Factors Influencing Conversion and Volume Stability in Calcium Aluminate Cement Systems

Creator:: Adams, Matthew P. (Matthew Peter)
Abstract:: There is renewed interest in North America for the use of calcium aluminate cement (CAC) in infrastructure repair. The interest is driven by the specialty properties that make CAC the ideal candidate for particular applications. These include rapid strength gain, even at temperatures approaching 0°C, the ability to customize fresh...
Resource Type:: Dissertation
Full Text:: of working together. Thank you to my committee members Dr. Belinda Batten and Dr. David Trejo for

Quantification of resin efficiency in wood composite panels

Creator:: Lampert, Nicholas S.
Abstract:: Efficient usage of resin is of critical importance to industry in the manufacture of wood composite panels, because resin represents a significant proportion of product costs. However, resin efficiency is poorly defined in literature, making it difficult to compare manufacturing processes in quantifiable terms. Additionally, resin content in the product...
Resource Type:: Masters Thesis

ScholarsArchive@OSU

Surface Modification to Enhance Corrosion Resistance of Carbon Steels using Additive Manufacturing

Improving Long-Term Interlayer Bond Performance by Developing Quality Control Technologies and Certification Procedures for Tack Coats

Conceptual Representations within the Social and Material Contexts of an Engineering Workplace and Academic Environments

Numerical response of concrete-lined tunnels crossing active faults

The Evaluation of Cementitious Pore Solution Composition and Electrical Resistivity Using X-ray Fluorescence (XRF)

Toward a mixture design methodology for internally cured concrete that considers filling specific pore sizes caused by self-desiccation

A Comprehensive Mechanistic Study on Using Fine Lightweight Aggregate to Mitigate Alkali-silica Reaction

Evaluation of the Effect of Chloride Ingress and Freeze-Thaw Cycles on Electrical Resistivity of Reinforced Concrete

Factors Influencing Conversion and Volume Stability in Calcium Aluminate Cement Systems

Quantification of resin efficiency in wood composite panels

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search