Retraction fibers (RFs) determine orientation of the cell division axis and guide the spreading of daughter cells. Long and unidirectional RFs, which are especially apparent during mitosis of cells in three-dimensional (3D) environments, enable improved control over cell fate, following division. However, 3D gel environments lack the cues necessary for...
The integration of amorphous zinc tin oxide (ZTO) into crossbar memristor device structures has been investigated where asymmetric devices were fabricated with Al (top) and Pt (bottom) electrodes. The authors found that these devices had reproducible bipolar resistive switching with high switching ratios >10(4) and long retention times of >10(4)...
The authors present a facile, low-cost methodology to fabricate high-performance In-Ga-Zn-O (IGZO) bottom contact, bottom gate thin-film transistors (TFTs) by soft lithography. The IGZO channel and indium tin oxide (ITO) source and drain were patterned using microcontact printing of an octadecylphosphonic acid self-assembled monolayer (SAM). A polymer stamp was used...
Biophysical studies of the interaction of peptides with model membranes provide a simple yet effective approach to understand the transport of peptides and peptide based drug carriers across the cell membrane. Herein, the authors discuss the use of self-assembled monolayers fabricated from the full membrane-spanning thiol (FMST) 3-((14-((40-((5-methyl-1-phenyl-35-(phytanyl)oxy- 6,9,12,15,18,21,24,27,30,33,37-undecaoxa-2,3-dithiahenpentacontan-51-yl)oxy)-[1,10-biphenyl]-4- yl)oxy)tetradecyl)oxy)-2-(phytanyl)oxy...
A comparison was made of Al₂O₃ films deposited on Si via prompt inorganic condensation (PIC)
and atomic layer deposition (ALD). Current–voltage measurements as a function of annealing
temperature indicate that the solution-processed PIC films, annealed at 500°C, exhibit lower
leakage and roughly equivalent breakdown strength in comparison to ALD films....
Bismuth oxide thin films were deposited by atomic layer deposition using Bi(OCMe₂ [superscript i]Pr)₃ and H₂O
at deposition temperatures between 90 and 270°C on Si₃N₄, TaN, and TiN substrates. Films were
analyzed using spectroscopic ellipsometry, x-ray diffraction, x-ray reflectivity, high-resolution
transmission electron microscopy, and Rutherford backscattering spectrometry. Bi₂O₃ films
deposited...
Metal–insulator–metal diodes with Nb₂O₅ and Ta₂O₅ insulators deposited via atomic layer deposition are investigated. For both Nb₂O₅ and Ta₂O₅, the dominant conduction process is established as Schottky emission at small biases and Frenkel–Poole emission at large biases. Fowler–Nordheim tunneling is not found to play a role in determining current versus...
Cellulose nanocrystal (CNC) aerogels are coated with thin conformal layers of Al₂O₃ using
atomic layer deposition to form hybrid organic/inorganic nanocomposites. Electron probe
microanalysis and scanning electron microscopy analysis indicated the Al₂O₃ penetrated more
than 1500 μm into the aerogel for extended precursor pulse and exposure/purge times. The
measured profile...
Low temperature atomic layer deposition (ALD) of monolayer to few layer MoS₂ uniformly across 150mm diameter SiO₂/Si and quartz substrates is demonstrated. Purge separated cycles of MoCl5 and H₂S precursors are used at reactor temperatures of up to 475 °C. Raman scattering studies show clearly the in-plane (E¹₂g) and out-of-plane...
The clotting protein von Willebrand factor (VWF) binds to platelet receptor glycoprotein Ibα (GPIbα) when VWF is activated by chemicals, high shear stress, or immobilization onto surfaces. Activation of VWF by surface immobilization is an important problem in the failure of cardiovascular implants, but is poorly understood. Here, the authors...