A commercially available, three-dimensional finite-element analysis software was used to model the load-displacement
behavior of metal-plate-connected (MPC) joints in wooden trusses. Model features included consideration
of material properties, teeth-to-grain-to-direction-of-force orientation, wood-to-wood interaction, and gaps between wood
members. To simulate wood-to-plate interaction, the main feature of the model, each tooth of...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
The objective of this research was to use a three-dimensional (3D) analysis method to evaluate “system effects” in light-frame roof truss assemblies. The goal of this study was to develop an improved and practical design method for 3D roof truss assemblies used in residential construction. A truss plate manufacturer (TPM)...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the gypsum wall board (GWB). A total of 14 shear walls consisting of seven different designs with two walls built per design were tested to failure. Six...
Background: Acyl-homoserine lactone (acyl-HSL) and alkyl quinolone (AQ) based quorum-sensing (QS) systems are important for Pseudomonas aeruginosa virulence and biofilm formation. The effect of QS on biofilm formation is influenced by various genetic and environmental factors. Here, we used a colony biofilm assay to study the effect of the central...
The objective of this study was to compare the shear strength of structural composite lumber (SCL) based on shear block to that of shear strength based on torsion test. Shear blocks in two diflcrent orientations fom laminated veneer lumber, parallel strand lumber, and laminated strand lumber (LSL) were tested and...
Fracture toughness of wood and wood composites has traditionally been characterized by a stress intensity factor, an initiation strain energy release rate (G[subscript init]) or a total energy to fracture (G[subscript f]). These parameters provide incomplete fracture characterization for these materials because the toughness changes as the crack propagates. Thus...
Fracture toughness of wood and wood composites has traditionally been characterized by a stress intensity factor, an initiation strain energy release rate (G init) or a total energy to fracture (G f). These parameters provide incomplete fracture characterization for these materials because the toughness changes as the crack propagates. Thus,...
Metal-plate-connected wood trusses with semi-rigid joints were investigated by the matrix method of structural analysis. The element-stiffness matrix and fixed-end forces of an individual member with one or both ends semi-rigid were derived as modifications of the idealized cases. The case of unequal elastic connections at two ends of a...